환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

TopThread™ - Boring Bars

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (40)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(40)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(40)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(40)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(40)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(40)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(40)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(40)
    • M Stainless Steel (40)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(40)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(40)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(40)
    • K Cast Iron (40)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(40)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(40)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(40)
    • N Non-Ferrous Materials (40)
      • N1
        Wrought Aluminum (40)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(40)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(40)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (40)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (40)
      • N6
        Carbon, Graphite Composites, CFRP (40)
      • N7
        MMC's (40)
    • S High-Temp Alloys (40)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(40)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(40)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(40)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(40)
    • H Hardened Materials (39)
      • H1
        Hardened Materials 44-48 HRC(39)
      • H2
        Hardened Materials 48-55 HRC(39)
      • H3
        Hardened Materials 56-60 HRC(36)
      • H4
        Hardened Materials >60 HRC(36)
    Select All Star
    • DE (2)
    • IN (2)
    • US (14)
    Applications
    Applications
    • GroovingGrooving (3)
    • ID GroovingID Grooving (37)
    • ID Thread TurningID Thread Turning (40)
    • ThreadingThreading (1)
    Type of Thread
    Type of Thread
    • 60 (39)
    • ACME (19)
    • API RD (13)
    • BSW (6)
    • BUTTRESS (7)
    • STUB ACME (13)
    • UN (31)
    • UNJ (6)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (34)
    • Lightly Interrupted Cut (34)
    • Smooth Cut (39)
    • Varying Depth of Cut (34)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (39)
    • 2.0 (35)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 4.921 in(1)
    • 5.906 in(5)
    • 6.0 in(1)
    • 7.087 in(2)
    • 7.875 in(4)
    • 8.0 in(3)
    • 9.843 in(2)
    • 10.0 in(5)
    • 11.811 in(3)
    • 12.0 in(4)
    • 13.781 in(1)
    • 14.0 in(6)
    • 16.0 in(3)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 125.0 mm(1)
    • 150.0 mm(5)
    • 152.4 mm(1)
    • 180.0 mm(2)
    • 200.0 mm(4)
    • 203.201 mm(3)
    • 250.0 mm(2)
    • 254.0 mm(5)
    • 300.0 mm(3)
    • 304.8 mm(4)
    • 350.0 mm(1)
    • 355.6 mm(6)
    • 406.401 mm(3)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(26)
    • 0.004 in(23)
    • 0.006 in(2)
    • 0.007 in(26)
    • 0.008 in(39)
    • 0.01 in(14)
    • 0.012 in(6)
    • 0.014 in(18)
    • 0.016 in(13)
    • 0.02 in(16)
    • 0.023 in(18)
    • 0.03 in(16)
    • 0.031 in(29)
    • 0.039 in(29)
    • 0.047 in(29)
    • 0.049 in(29)
    • 0.06 in(29)
    • 0.062 in(13)
    • 0.063 in(18)
    • 0.069 in(29)
    • 0.078 in(13)
    • 0.079 in(18)
    • 0.089 in(18)
    • 0.095 in(18)
    • 0.098 in(5)
    • 0.125 in(5)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(26)
    • 0.1 mm(23)
    • 0.151 mm(2)
    • 0.176 mm(26)
    • 0.2 mm(39)
    • 0.225 mm(6)
    • 0.25 mm(14)
    • 0.301 mm(6)
    • 0.325 mm(18)
    • 0.351 mm(13)
    • 0.4 mm(13)
    • 0.5 mm(16)
    • 0.576 mm(18)
    • 0.75 mm(16)
    • 0.775 mm(29)
    • 1.0 mm(29)
    • 1.201 mm(29)
    • 1.25 mm(29)
    • 1.5 mm(29)
    • 1.576 mm(13)
    • 1.6 mm(18)
    • 1.75 mm(29)
    • 1.975 mm(13)
    • 2.0 mm(18)
    • 2.25 mm(18)
    • 2.401 mm(18)
    • 2.5 mm(5)
    • 3.176 mm(5)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (29)
    • TN10P (24)
    • TN6010 (39)
    • TN6025 (40)
    • TN7110 (34)
    • WU10HT (6)
    • WU10PT (13)
    • WU25PT (7)
    Hand Of Tool
    Hand Of Tool
    • L (16)
    • R (24)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 10.3 mm(1)
    • 11.0 mm(4)
    • 11.101 mm(2)
    • 12.701 mm(2)
    • 13.0 mm(2)
    • 14.275 mm(2)
    • 17.0 mm(4)
    • 17.475 mm(4)
    • 22.0 mm(2)
    • 22.225 mm(2)
    • 25.401 mm(2)
    • 27.0 mm(3)
    • 31.75 mm(3)
    • 34.926 mm(2)
    • 35.0 mm(1)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.406 in(1)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.5 in(2)
    • 0.512 in(2)
    • 0.562 in(2)
    • 0.669 in(4)
    • 0.689 in(4)
    • 0.866 in(2)
    • 0.875 in(2)
    • 1.0 in(2)
    • 1.063 in(3)
    • 1.25 in(3)
    • 1.375 in(2)
    • 1.379 in(1)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 18.5 mm(2)
    • 18.55 mm(2)
    • 20.326 mm(1)
    • 22.0 mm(2)
    • 25.401 mm(2)
    • 26.0 mm(2)
    • 28.576 mm(2)
    • 34.0 mm(4)
    • 34.926 mm(4)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 50.801 mm(2)
    • 54.0 mm(3)
    • 63.5 mm(3)
    • 69.851 mm(2)
    • 70.0 mm(1)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(2)
    • 0.73 in(2)
    • 0.8 in(1)
    • 0.866 in(2)
    • 1.0 in(2)
    • 1.024 in(2)
    • 1.125 in(2)
    • 1.339 in(4)
    • 1.375 in(4)
    • 1.732 in(2)
    • 1.75 in(2)
    • 2.0 in(2)
    • 2.126 in(3)
    • 2.5 in(3)
    • 2.75 in(2)
    • 2.757 in(1)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(39)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(39)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.891 in(2)
    • 2.0 in(2)
    • 2.5 in(3)
    • 2.52 in(2)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(4)
    • 4.0 in(4)
    • 5.0 in(2)
    • 5.039 in(2)
    • 6.0 in(2)
    • 6.299 in(3)
    • 7.0 in(2)
    • 7.875 in(1)
    • 8.0 in(3)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 32.775 mm(1)
    • 38.1 mm(1)
    • 48.0 mm(2)
    • 50.801 mm(2)
    • 63.5 mm(3)
    • 64.0 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(4)
    • 101.601 mm(4)
    • 127.0 mm(2)
    • 128.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(3)
    • 177.8 mm(2)
    • 200.0 mm(1)
    • 203.201 mm(3)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.02 in(16)
    • 0.031 in(16)
    • 0.039 in(29)
    • 0.041 in(8)
    • 0.047 in(34)
    • 0.055 in(16)
    • 0.058 in(16)
    • 0.06 in(29)
    • 0.062 in(34)
    • 0.067 in(16)
    • 0.069 in(29)
    • 0.073 in(13)
    • 0.077 in(16)
    • 0.078 in(13)
    • 0.079 in(29)
    • 0.088 in(29)
    • 0.089 in(23)
    • 0.094 in(6)
    • 0.095 in(34)
    • 0.098 in(29)
    • 0.108 in(29)
    • 0.119 in(34)
    • 0.125 in(34)
    • 0.126 in(13)
    • 0.128 in(29)
    • 0.138 in(34)
    • 0.147 in(8)
    • 0.152 in(16)
    • 0.156 in(13)
    • 0.157 in(18)
    • 0.167 in(13)
    • 0.177 in(18)
    • 0.188 in(15)
    • 0.189 in(18)
    • 0.192 in(6)
    • 0.195 in(6)
    • 0.196 in(13)
    • 0.197 in(5)
    • 0.217 in(5)
    • 0.237 in(5)
    • 0.25 in(5)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(16)
    • 0.775 mm(16)
    • 0.8 mm(16)
    • 1.0 mm(29)
    • 1.05 mm(8)
    • 1.201 mm(34)
    • 1.401 mm(16)
    • 1.475 mm(16)
    • 1.5 mm(29)
    • 1.576 mm(34)
    • 1.701 mm(16)
    • 1.75 mm(29)
    • 1.826 mm(13)
    • 1.951 mm(16)
    • 1.975 mm(13)
    • 2.0 mm(29)
    • 2.2 mm(29)
    • 2.225 mm(6)
    • 2.25 mm(23)
    • 2.375 mm(6)
    • 2.401 mm(34)
    • 2.5 mm(29)
    • 2.75 mm(29)
    • 3.0 mm(34)
    • 3.176 mm(34)
    • 3.2 mm(13)
    • 3.25 mm(29)
    • 3.5 mm(34)
    • 3.725 mm(8)
    • 3.85 mm(16)
    • 3.95 mm(13)
    • 3.975 mm(6)
    • 4.0 mm(18)
    • 4.25 mm(13)
    • 4.5 mm(18)
    • 4.775 mm(15)
    • 4.801 mm(18)
    • 4.875 mm(6)
    • 4.95 mm(6)
    • 4.976 mm(13)
    • 5.0 mm(5)
    • 5.5 mm(5)
    • 6.0 mm(5)
    • 6.351 mm(5)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Size
    Insert Size
    • 1 (5)
    • 2 (16)
    • 3 (13)
    • 4 (5)
    • 6 (1)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.067 in(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.701 mm(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.701 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(3)
    • 44.45 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(3)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(3)
    • 0.5 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(3)
    • 1.75 in(2)
    • 1.969 in(1)
    • 2.0 in(3)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    Integral I.D. Threading Boring Bars • A-NE
    (19)

    Integral I.D. Threading Boring Bars • A-NE

    일체형 내경 나사가공 보링 바 • A-NNT • Metric
    (16)

    일체형 내경 나사가공 보링 바 • A-NNT • Metric

    Integral I.D. Threading Boring Bars • A-NE-1
    (3)

    Integral I.D. Threading Boring Bars • A-NE-1

    일체형 내경 나사가공 보링 바 • A-NNT-1 • Metric
    (2)

    일체형 내경 나사가공 보링 바 • A-NNT-1 • Metric

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?