환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트
제품 제안
Product Family suggestions
너무 늦기 전에 독점적인 혜택을 누리세요! 特別オファー
- 제품
- /
- 솔리드 엔드밀
- /
- 고성능 솔리드 초경 엔드밀
- /
- Vision Plus™
Vision Plus™
필터 선택
필터
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
- P Steel (241)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(63)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(63)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(63)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(241)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(241)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(67)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
- M Stainless Steel (4)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
- K Cast Iron (67)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(67)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(67)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- S High-Temp Alloys (4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- H Hardened Materials (241)
- H1Hardened Materials 44-48 HRC(241)
- H2Hardened Materials 48-55 HRC(241)
- H3Hardened Materials 56-60 HRC(241)
- H4Hardened Materials >60 HRC(169)
Select All Star
- US (9)
Applications
Applications
Pocket (168)
Pocket Helical (168)
Pocket Milling (168)
Profile Milling (38)
Ramping (174)
Shoulder Ball Nose (38)
Shoulder Milling (183)
Slot Ball Nose (38)
Slot Milling (115)
Slot Square End (77)
=
Cutting Diameter
Cutting Diameter
- 0.012 in(2)
- 0.016 in(3)
- 0.02 in(6)
- 0.024 in(2)
- 0.028 in(1)
- 0.031 in(6)
- 0.039 in(11)
- 0.047 in(6)
- 0.055 in(4)
- 0.06 in(11)
- 0.067 in(2)
- 0.072 in(5)
- 0.075 in(1)
- 0.079 in(13)
- 0.098 in(7)
- 0.119 in(20)
- 0.12 in(1)
- 0.125 in(1)
- 0.157 in(15)
- 0.188 in(1)
- 0.197 in(11)
- 0.237 in(22)
- 0.25 in(3)
- 0.313 in(4)
- 0.315 in(19)
- 0.375 in(5)
- 0.394 in(19)
- 0.473 in(15)
- 0.5 in(4)
- 0.625 in(2)
- 0.63 in(9)
- 0.75 in(2)
- 0.787 in(6)
- 0.984 in(2)
- 1.0 in(1)
Cutting Diameter Min값 입력받는 사람Cutting Diameter MaxCutting Diameter
=
Cutting Diameter
Cutting Diameter
- 0.301 mm(2)
- 0.4 mm(3)
- 0.5 mm(6)
- 0.601 mm(2)
- 0.701 mm(1)
- 0.8 mm(6)
- 1.0 mm(11)
- 1.201 mm(6)
- 1.401 mm(4)
- 1.5 mm(11)
- 1.701 mm(2)
- 1.8 mm(5)
- 1.901 mm(1)
- 2.0 mm(13)
- 2.5 mm(7)
- 3.0 mm(20)
- 3.051 mm(1)
- 3.176 mm(1)
- 4.0 mm(15)
- 4.775 mm(1)
- 5.0 mm(11)
- 6.0 mm(22)
- 6.351 mm(3)
- 7.95 mm(4)
- 8.0 mm(19)
- 9.525 mm(5)
- 10.0 mm(19)
- 12.0 mm(15)
- 12.701 mm(4)
- 15.875 mm(2)
- 16.0 mm(9)
- 19.05 mm(2)
- 20.0 mm(6)
- 25.0 mm(2)
- 25.401 mm(1)
Cutting Diameter Min값 입력받는 사람Cutting Diameter MaxCutting Diameter
=
Cutting Length
Cutting Length
- 0.301 mm(1)
- 0.4 mm(2)
- 0.5 mm(1)
- 0.601 mm(3)
- 0.701 mm(4)
- 0.8 mm(1)
- 0.9 mm(1)
- 1.0 mm(4)
- 1.201 mm(5)
- 1.3 mm(1)
- 1.5 mm(9)
- 1.6 mm(1)
- 1.8 mm(4)
- 2.0 mm(4)
- 2.1 mm(4)
- 2.301 mm(8)
- 2.401 mm(1)
- 2.5 mm(2)
- 2.6 mm(2)
- 2.7 mm(5)
- 2.801 mm(1)
- 3.0 mm(16)
- 3.176 mm(1)
- 3.2 mm(1)
- 3.7 mm(6)
- 4.0 mm(8)
- 4.5 mm(13)
- 4.775 mm(1)
- 5.0 mm(4)
- 6.0 mm(13)
- 6.351 mm(1)
- 7.5 mm(6)
- 7.95 mm(1)
- 8.0 mm(6)
- 9.0 mm(12)
- 9.525 mm(3)
- 10.0 mm(4)
- 12.0 mm(14)
- 12.701 mm(2)
- 13.0 mm(1)
- 14.3 mm(1)
- 15.0 mm(14)
- 15.875 mm(1)
- 16.0 mm(2)
- 18.0 mm(10)
- 19.05 mm(3)
- 20.0 mm(2)
- 21.0 mm(1)
- 23.826 mm(1)
- 24.0 mm(4)
- 25.0 mm(2)
- 28.0 mm(1)
- 28.576 mm(1)
- 30.0 mm(5)
- 31.75 mm(1)
- 33.35 mm(1)
- 35.0 mm(1)
- 39.7 mm(1)
- 40.0 mm(2)
- 42.0 mm(1)
- 44.45 mm(1)
- 45.0 mm(1)
- 50.0 mm(1)
- 55.575 mm(1)
- 56.0 mm(1)
- 63.0 mm(1)
- 66.675 mm(1)
- 70.0 mm(1)
- 88.0 mm(1)
- 88.9 mm(1)
Cutting Length Min값 입력받는 사람Cutting Length MaxCutting Length
=
Cutting Length
Cutting Length
- 0.012 in(1)
- 0.016 in(2)
- 0.02 in(1)
- 0.024 in(3)
- 0.028 in(4)
- 0.031 in(1)
- 0.035 in(1)
- 0.039 in(4)
- 0.047 in(5)
- 0.052 in(1)
- 0.06 in(9)
- 0.063 in(1)
- 0.072 in(4)
- 0.079 in(4)
- 0.083 in(4)
- 0.091 in(8)
- 0.095 in(1)
- 0.098 in(2)
- 0.103 in(2)
- 0.106 in(5)
- 0.11 in(1)
- 0.119 in(16)
- 0.125 in(1)
- 0.126 in(1)
- 0.146 in(6)
- 0.157 in(8)
- 0.177 in(13)
- 0.188 in(1)
- 0.197 in(4)
- 0.237 in(13)
- 0.25 in(1)
- 0.295 in(6)
- 0.313 in(1)
- 0.315 in(6)
- 0.354 in(12)
- 0.375 in(3)
- 0.394 in(4)
- 0.473 in(14)
- 0.5 in(2)
- 0.512 in(1)
- 0.564 in(1)
- 0.591 in(14)
- 0.625 in(1)
- 0.63 in(2)
- 0.709 in(10)
- 0.75 in(3)
- 0.787 in(2)
- 0.828 in(1)
- 0.939 in(1)
- 0.946 in(4)
- 0.984 in(2)
- 1.102 in(1)
- 1.125 in(1)
- 1.181 in(5)
- 1.25 in(1)
- 1.313 in(1)
- 1.379 in(1)
- 1.563 in(1)
- 1.575 in(2)
- 1.655 in(1)
- 1.75 in(1)
- 1.772 in(1)
- 1.969 in(1)
- 2.188 in(1)
- 2.205 in(1)
- 2.48 in(1)
- 2.625 in(1)
- 2.757 in(1)
- 3.465 in(1)
- 3.5 in(1)
Cutting Length Min값 입력받는 사람Cutting Length MaxCutting Length
=
Reach
Reach
- 0.012 in(1)
- 0.016 in(2)
- 0.024 in(1)
- 0.039 in(1)
- 0.06 in(2)
- 0.072 in(2)
- 0.079 in(4)
- 0.095 in(2)
- 0.098 in(2)
- 0.119 in(9)
- 0.125 in(1)
- 0.138 in(1)
- 0.15 in(2)
- 0.157 in(8)
- 0.177 in(6)
- 0.188 in(1)
- 0.197 in(9)
- 0.237 in(23)
- 0.25 in(1)
- 0.295 in(5)
- 0.313 in(1)
- 0.315 in(11)
- 0.354 in(13)
- 0.375 in(3)
- 0.394 in(12)
- 0.473 in(19)
- 0.5 in(1)
- 0.512 in(1)
- 0.564 in(1)
- 0.591 in(13)
- 0.625 in(1)
- 0.63 in(7)
- 0.709 in(12)
- 0.75 in(2)
- 0.787 in(9)
- 0.828 in(1)
- 0.939 in(1)
- 0.946 in(8)
- 0.984 in(3)
- 1.102 in(1)
- 1.125 in(1)
- 1.181 in(10)
- 1.25 in(1)
- 1.313 in(1)
- 1.379 in(1)
- 1.417 in(4)
- 1.563 in(1)
- 1.575 in(2)
- 1.655 in(1)
- 1.75 in(1)
- 1.772 in(1)
- 1.891 in(3)
- 1.95 in(1)
- 1.969 in(1)
- 2.188 in(1)
- 2.205 in(1)
- 2.25 in(1)
- 2.362 in(2)
- 2.48 in(1)
- 2.625 in(1)
- 2.757 in(1)
- 3.465 in(1)
- 3.5 in(1)
Reach Min값 입력받는 사람Reach MaxReach
=
Reach
Reach
- 0.301 mm(1)
- 0.4 mm(2)
- 0.601 mm(1)
- 1.0 mm(1)
- 1.5 mm(2)
- 1.8 mm(2)
- 2.0 mm(4)
- 2.401 mm(2)
- 2.5 mm(2)
- 3.0 mm(9)
- 3.176 mm(1)
- 3.5 mm(1)
- 3.801 mm(2)
- 4.0 mm(8)
- 4.5 mm(6)
- 4.775 mm(1)
- 5.0 mm(9)
- 6.0 mm(23)
- 6.351 mm(1)
- 7.5 mm(5)
- 7.95 mm(1)
- 8.0 mm(11)
- 9.0 mm(13)
- 9.525 mm(3)
- 10.0 mm(12)
- 12.0 mm(19)
- 12.701 mm(1)
- 13.0 mm(1)
- 14.3 mm(1)
- 15.0 mm(13)
- 15.875 mm(1)
- 16.0 mm(7)
- 18.0 mm(12)
- 19.05 mm(2)
- 20.0 mm(9)
- 21.0 mm(1)
- 23.826 mm(1)
- 24.0 mm(8)
- 25.0 mm(3)
- 28.0 mm(1)
- 28.576 mm(1)
- 30.0 mm(10)
- 31.75 mm(1)
- 33.35 mm(1)
- 35.0 mm(1)
- 36.0 mm(4)
- 39.7 mm(1)
- 40.0 mm(2)
- 42.0 mm(1)
- 44.45 mm(1)
- 45.0 mm(1)
- 48.0 mm(3)
- 49.526 mm(1)
- 50.0 mm(1)
- 55.575 mm(1)
- 56.0 mm(1)
- 57.151 mm(1)
- 60.0 mm(2)
- 63.0 mm(1)
- 66.675 mm(1)
- 70.0 mm(1)
- 88.0 mm(1)
- 88.9 mm(1)
Reach Min값 입력받는 사람Reach MaxReach
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (238)
Tool Cutting Edge Angle Min값 입력받는 사람Tool Cutting Edge Angle MaxTool Cutting Edge Angle
Number of Flutes
Number of Flutes
- 2 (108)
- 4 (108)
- 5 (4)
- 6 (22)
=
Over All Length [L]
Over All Length [L]
- 1.496 in(8)
- 1.969 in(78)
- 2.244 in(8)
- 2.362 in(5)
- 2.48 in(24)
- 2.953 in(10)
- 2.992 in(31)
- 3.0 in(4)
- 3.15 in(3)
- 3.504 in(2)
- 3.938 in(26)
- 4.0 in(8)
- 4.094 in(1)
- 4.331 in(1)
- 4.724 in(1)
- 4.921 in(15)
- 5.0 in(8)
- 5.906 in(6)
- 6.0 in(3)
Over All Length [L] Min값 입력받는 사람Over All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 38.0 mm(8)
- 50.0 mm(78)
- 57.0 mm(8)
- 60.0 mm(5)
- 63.0 mm(24)
- 75.0 mm(10)
- 76.0 mm(31)
- 76.2 mm(4)
- 80.0 mm(3)
- 89.0 mm(2)
- 100.0 mm(26)
- 101.601 mm(8)
- 104.0 mm(1)
- 110.0 mm(1)
- 120.0 mm(1)
- 125.0 mm(15)
- 127.0 mm(8)
- 150.0 mm(6)
- 152.4 mm(3)
Over All Length [L] Min값 입력받는 사람Over All Length [L] MaxOver All Length [L]
cornerConfiguration
Corner Style
Corner Style
- BALL NOSE (65)
- RADIUS (55)
- SQUARE END (122)
≈
Corner Radius
Corner Radius
- 0.0 in(122)
- 0.006 in(1)
- 0.008 in(1)
- 0.01 in(11)
- 0.012 in(3)
- 0.016 in(2)
- 0.02 in(24)
- 0.024 in(1)
- 0.03 in(6)
- 0.039 in(18)
- 0.04 in(1)
- 0.049 in(1)
- 0.05 in(1)
- 0.06 in(9)
- 0.063 in(1)
- 0.079 in(13)
- 0.094 in(1)
- 0.098 in(4)
- 0.119 in(7)
- 0.125 in(1)
- 0.156 in(1)
- 0.157 in(5)
- 0.187 in(1)
- 0.197 in(4)
- 0.237 in(2)
- 0.315 in(1)
Corner Radius Min값 입력받는 사람Corner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 0.0 mm(122)
- 0.151 mm(1)
- 0.2 mm(1)
- 0.25 mm(11)
- 0.301 mm(3)
- 0.4 mm(2)
- 0.5 mm(24)
- 0.601 mm(1)
- 0.75 mm(6)
- 1.0 mm(18)
- 1.026 mm(1)
- 1.25 mm(1)
- 1.276 mm(1)
- 1.5 mm(9)
- 1.6 mm(1)
- 2.0 mm(13)
- 2.375 mm(1)
- 2.5 mm(4)
- 3.0 mm(7)
- 3.176 mm(1)
- 3.975 mm(1)
- 4.0 mm(5)
- 4.75 mm(1)
- 5.0 mm(4)
- 6.0 mm(2)
- 8.0 mm(1)
Corner Radius Min값 입력받는 사람Corner Radius MaxCorner Radius
=
Corner Chamfer
Corner Chamfer
- 0.0 mm(241)
- 0.351 mm(1)
Corner Chamfer Min값 입력받는 사람Corner Chamfer MaxCorner Chamfer
=
Corner Chamfer
Corner Chamfer
- 0.0 in(241)
- 0.014 in(1)
Corner Chamfer Min값 입력받는 사람Corner Chamfer MaxCorner Chamfer
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- ALTIN-MT (3)
- ALTIN-MT1 (20)
- TIALN-LT (1)
- TIALN-LT1 (84)
- WU10PE (134)
Rough Finish
Rough Finish
- F (139)
- FR (99)
- R (4)
=
Maximum Ramp Angle
Maximum Ramp Angle
- 5.0 (15)
Maximum Ramp Angle Min값 입력받는 사람Maximum Ramp Angle MaxMaximum Ramp Angle
frontEnd
=
Neck Diameter
Neck Diameter
- 0.01 in(1)
- 0.014 in(2)
- 0.019 in(6)
- 0.022 in(2)
- 0.027 in(1)
- 0.03 in(6)
- 0.031 in(1)
- 0.037 in(8)
- 0.045 in(6)
- 0.052 in(1)
- 0.053 in(4)
- 0.057 in(10)
- 0.065 in(2)
- 0.069 in(5)
- 0.072 in(1)
- 0.073 in(1)
- 0.077 in(9)
- 0.095 in(3)
- 0.096 in(4)
- 0.106 in(2)
- 0.11 in(2)
- 0.114 in(2)
- 0.116 in(5)
- 0.119 in(1)
- 0.146 in(4)
- 0.156 in(1)
- 0.181 in(3)
- 0.213 in(4)
- 0.217 in(1)
- 0.232 in(1)
- 0.291 in(4)
- 0.295 in(1)
- 0.362 in(3)
- 0.37 in(1)
- 0.374 in(1)
- 0.433 in(3)
- 0.449 in(1)
- 0.472 in(1)
- 0.591 in(2)
- 0.606 in(1)
- 0.713 in(1)
- 0.748 in(1)
- 0.764 in(1)
Neck Diameter Min값 입력받는 사람Neck Diameter MaxNeck Diameter
=
Neck Diameter
Neck Diameter
- 0.25 mm(1)
- 0.351 mm(2)
- 0.45 mm(6)
- 0.55 mm(2)
- 0.65 mm(1)
- 0.75 mm(6)
- 0.8 mm(1)
- 0.951 mm(8)
- 1.151 mm(6)
- 1.3 mm(1)
- 1.35 mm(4)
- 1.451 mm(10)
- 1.651 mm(2)
- 1.75 mm(5)
- 1.8 mm(1)
- 1.85 mm(1)
- 1.951 mm(9)
- 2.401 mm(3)
- 2.45 mm(4)
- 2.7 mm(2)
- 2.801 mm(2)
- 2.901 mm(2)
- 2.95 mm(5)
- 3.0 mm(1)
- 3.7 mm(4)
- 3.95 mm(1)
- 4.601 mm(3)
- 5.4 mm(4)
- 5.5 mm(1)
- 5.9 mm(1)
- 7.4 mm(4)
- 7.5 mm(1)
- 9.201 mm(3)
- 9.4 mm(1)
- 9.5 mm(1)
- 11.0 mm(3)
- 11.4 mm(1)
- 11.951 mm(1)
- 15.0 mm(2)
- 15.4 mm(1)
- 18.1 mm(1)
- 19.0 mm(1)
- 19.401 mm(1)
Neck Diameter Min값 입력받는 사람Neck Diameter MaxNeck Diameter
backEnd
=
Back-End Diameter
Back-End Diameter
- 3.0 mm(8)
- 4.0 mm(51)
- 5.0 mm(2)
- 6.0 mm(85)
- 6.351 mm(4)
- 7.95 mm(3)
- 8.0 mm(17)
- 9.525 mm(5)
- 10.0 mm(23)
- 12.0 mm(16)
- 12.701 mm(5)
- 15.875 mm(3)
- 16.0 mm(9)
- 19.05 mm(2)
- 20.0 mm(6)
- 25.0 mm(2)
- 25.401 mm(1)
Back-End Diameter Min값 입력받는 사람Back-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.119 in(8)
- 0.157 in(51)
- 0.197 in(2)
- 0.237 in(85)
- 0.25 in(4)
- 0.313 in(3)
- 0.315 in(17)
- 0.375 in(5)
- 0.394 in(23)
- 0.473 in(16)
- 0.5 in(5)
- 0.625 in(3)
- 0.63 in(9)
- 0.75 in(2)
- 0.787 in(6)
- 0.984 in(2)
- 1.0 in(1)
Back-End Diameter Min값 입력받는 사람Back-End Diameter MaxBack-End Diameter
No filters matching ""
