환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

    M680 시리즈

    필터 선택
    필터
    필터
      필터 보기 위치
      Metric
      Inch
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (81)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(74)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(81)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(81)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(81)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(81)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(78)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(78)
      • M Stainless Steel (86)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(86)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(86)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(86)
      • K Cast Iron (107)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(107)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
      • N Non-Ferrous Materials (55)
        • N1
          Wrought Aluminum (55)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(55)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(55)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
        • N6
          Carbon, Graphite Composites, CFRP (25)
        • N7
          MMC's (25)
      • S High-Temp Alloys (79)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(64)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(64)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(64)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(79)
      • H Hardened Materials (35)
        • H1
          Hardened Materials 44-48 HRC(35)
      Select All Star
      • CN (31)
      • DE (56)
      • GB (8)
      • IN (29)
      • SG (10)
      Applications
      Applications
      • Face MillingFace Milling (31)
      • PocketPocket (8)
      • Pocket MillingPocket Milling (8)
      • Pocket Plunge MillingPocket Plunge Milling (8)
      • RampingRamping (8)
      • Shoulder MillingShoulder Milling (31)
      • Shoulder RoughingShoulder Roughing (8)
      • Shoulder Square EndShoulder Square End (21)
      • Slot MillingSlot Milling (31)
      • Slot SideSlot Side (8)
      • Slot Square EndSlot Square End (29)
      Cutting Diameter
      Cutting Diameter
      • 0.625 in(1)
      • 0.63 in(2)
      • 0.75 in(1)
      • 0.787 in(2)
      • 0.984 in(4)
      • 1.0 in(2)
      • 1.25 in(1)
      • 1.26 in(5)
      • 1.379 in(1)
      • 1.575 in(4)
      • 1.969 in(2)
      • 2.0 in(1)
      • 2.48 in(1)
      • 3.15 in(1)
      • 3.938 in(1)
      • 4.921 in(1)
      • 6.299 in(1)
      Cutting Diameter Min받는 사람Cutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 15.875 mm(1)
      • 16.0 mm(2)
      • 19.05 mm(1)
      • 20.0 mm(2)
      • 25.0 mm(4)
      • 25.401 mm(2)
      • 31.75 mm(1)
      • 32.0 mm(5)
      • 35.0 mm(1)
      • 40.0 mm(4)
      • 50.0 mm(2)
      • 50.801 mm(1)
      • 63.0 mm(1)
      • 80.0 mm(1)
      • 100.0 mm(1)
      • 125.0 mm(1)
      • 160.0 mm(1)
      Cutting Diameter Min받는 사람Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 9.0 mm(10)
      • 9.5 mm(4)
      • 13.976 mm(3)
      • 14.0 mm(12)
      • 15.3 mm(1)
      • 15.351 mm(1)
      Cutting Length Min받는 사람Cutting Length Max
      Cutting Length
      Cutting Length
      • 0.354 in(10)
      • 0.374 in(4)
      • 0.55 in(3)
      • 0.551 in(12)
      • 0.602 in(1)
      • 0.604 in(1)
      Cutting Length Min받는 사람Cutting Length Max
      Reach
      Reach
      • 1.063 in(1)
      • 1.071 in(1)
      • 1.181 in(2)
      • 1.186 in(1)
      • 1.26 in(1)
      • 1.286 in(1)
      • 1.5 in(1)
      • 1.536 in(2)
      • 1.566 in(1)
      • 1.567 in(1)
      • 1.575 in(10)
      • 1.72 in(1)
      • 1.772 in(1)
      • 1.969 in(3)
      • 2.025 in(1)
      • 2.45 in(1)
      • 2.48 in(2)
      Reach Min받는 사람Reach Max
      Reach
      Reach
      • 27.0 mm(1)
      • 27.201 mm(1)
      • 30.0 mm(2)
      • 30.125 mm(1)
      • 32.0 mm(1)
      • 32.676 mm(1)
      • 38.1 mm(1)
      • 39.0 mm(2)
      • 39.776 mm(1)
      • 39.801 mm(1)
      • 40.0 mm(10)
      • 43.7 mm(1)
      • 45.0 mm(1)
      • 50.0 mm(3)
      • 51.426 mm(1)
      • 62.225 mm(1)
      • 63.0 mm(2)
      Reach Min받는 사람Reach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (23)
      • 90.25 (2)
      • 90.28 (2)
      • 90.4 (4)
      Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (6)
      • B-Cutter Retention Screw (3)
      • SHCS or RetScrw Or BoltCircle (1)
      • Screw-On Connection (6)
      • Straight-Cylindrical (8)
      • Weldon (7)
      Number of Flutes
      Number of Flutes
      • 12 (1)
      • 2 (9)
      • 3 (6)
      • 4 (6)
      • 5 (5)
      • 6 (2)
      • 8 (1)
      • 9 (1)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.5 in(1)
      • 1.575 in(4)
      • 1.772 in(1)
      • 1.969 in(2)
      • 2.047 in(2)
      • 2.48 in(6)
      • 2.953 in(1)
      • 3.228 in(1)
      • 3.781 in(1)
      • 3.938 in(2)
      • 4.0 in(1)
      • 4.331 in(1)
      • 6.0 in(1)
      • 7.087 in(1)
      • 7.875 in(1)
      • 8.0 in(2)
      • 8.661 in(1)
      • 9.8 in(1)
      • 9.843 in(1)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 38.1 mm(1)
      • 40.0 mm(4)
      • 45.0 mm(1)
      • 50.0 mm(2)
      • 52.0 mm(2)
      • 63.0 mm(6)
      • 75.0 mm(1)
      • 82.0 mm(1)
      • 96.0 mm(1)
      • 100.0 mm(2)
      • 101.601 mm(1)
      • 110.0 mm(1)
      • 152.4 mm(1)
      • 180.0 mm(1)
      • 200.0 mm(1)
      • 203.201 mm(2)
      • 220.0 mm(1)
      • 248.925 mm(1)
      • 250.0 mm(1)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.016 in(30)
      • 0.031 in(65)
      • 0.047 in(57)
      • 0.063 in(33)
      • 0.066 in(17)
      • 0.079 in(32)
      • 0.098 in(21)
      • 0.125 in(20)
      • 0.157 in(21)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Radius
      Corner Radius
      • 0.4 mm(30)
      • 0.8 mm(65)
      • 1.201 mm(57)
      • 1.6 mm(33)
      • 1.675 mm(17)
      • 2.0 mm(32)
      • 2.5 mm(21)
      • 3.176 mm(20)
      • 4.0 mm(21)
      Corner Radius Min받는 사람Corner Radius Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM (42)
      • THM-U (20)
      • THR (28)
      • TN2510 (27)
      • TN25M (27)
      • TN450 (31)
      • TN5515 (31)
      • TN6501 (22)
      • TN6502 (22)
      • TN6510 (24)
      • TN6520 (25)
      • TN6525 (26)
      • TN6540 (30)
      • TN7525 (31)
      • TN7535 (31)
      • TTI25 (34)
      • TTM (4)
      • TTM08 (30)
      • TTR (17)
      • WK15CM (45)
      • WK15PM (11)
      • WP35CM (46)
      • WP40PM (24)
      • WS30PM (18)
      • WU20PM (34)
      Hand Of Tool
      Hand Of Tool
      • R (31)
      Rough Finish
      Rough Finish
      • FR (5)
      Wiper Insert
      Wiper Insert
      • N (89)
      frontEnd
      Insert Shape
      Insert Shape
      • A-PARALLELOGRAM 85 (13)
      • X-PARALLELOGRAM 80 (102)
      • X-RECTANGLE MILL 4 90 (18)
      • X-RH0MBIC 70 (14)
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • A-PARALLELOGRAM 85 (9)
      • X-PARALLELOGRAM 80 (75)
      • X-RECTANGLE MILL 4 90 (1)
      • X-RH0MBIC 70 (4)
      Insert IC Size
      Insert IC Size
      • 9.525 mm(5)
      Insert IC Size Min받는 사람Insert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.375 in(5)
      Insert IC Size Min받는 사람Insert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 8.875 mm(1)
      • 8.951 mm(1)
      • 9.0 mm(1)
      • 9.175 mm(1)
      • 9.451 mm(1)
      • 9.475 mm(5)
      • 9.875 mm(2)
      • 10.375 mm(4)
      • 10.451 mm(5)
      • 15.675 mm(58)
      • 15.775 mm(3)
      • 15.875 mm(5)
      Cutting Edge Length Min받는 사람Cutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.35 in(1)
      • 0.352 in(1)
      • 0.354 in(1)
      • 0.361 in(1)
      • 0.372 in(1)
      • 0.373 in(5)
      • 0.389 in(2)
      • 0.409 in(4)
      • 0.412 in(5)
      • 0.617 in(58)
      • 0.621 in(3)
      • 0.625 in(5)
      Cutting Edge Length Min받는 사람Cutting Edge Length Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • AL (9)
      • ALP (4)
      • GE (11)
      • MH (3)
      • ML (4)
      • MM (4)
      • MR (3)
      Cutting Tool Material
      Cutting Tool Material
      • H T (3)
      • H W (86)
      Tolerance Class
      Tolerance Class
      • H (73)
      • M (2)
      • N (14)
      backEnd
      Connection Type
      Connection Type
      • CYLINDRICAL (15)
      • SCREW-ON (6)
      • SHELL MILL (10)
      Back-End Diameter
      Back-End Diameter
      • 15.875 mm(1)
      • 16.0 mm(2)
      • 19.05 mm(2)
      • 20.0 mm(2)
      • 22.0 mm(5)
      • 24.375 mm(1)
      • 25.0 mm(3)
      • 25.401 mm(2)
      • 27.0 mm(1)
      • 28.0 mm(3)
      • 31.75 mm(1)
      • 32.0 mm(6)
      • 40.0 mm(2)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.625 in(1)
      • 0.63 in(2)
      • 0.75 in(2)
      • 0.787 in(2)
      • 0.866 in(5)
      • 0.96 in(1)
      • 0.984 in(3)
      • 1.0 in(2)
      • 1.063 in(1)
      • 1.102 in(3)
      • 1.25 in(1)
      • 1.26 in(6)
      • 1.575 in(2)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      No filters matching ""
      M680
      (107)

      M680

      M680+
      (13)

      M680+

      내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
      Select the destination where you want to move 받는 사람.
      신제품 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      유효한 이름을 입력하십시오.
      product-image
      Please adjust the following properties from

      ISO 카탈로그 번호

      ANSI 카탈로그 번호

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      Product data

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      대시보드 정보를 보려면 로그인해야 합니다.
      Session expired due to inactivity, please login again
      장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
      항목이 장바구니에 추가되었습니다.
      장바구니 보기

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO 카탈로그 번호등급  

      You are about to leave the Solution building process.

      Are you sure you want to leave?