환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트
제품 제안
Product Family suggestions
너무 늦기 전에 독점적인 혜택을 누리세요! 特別オファー
인덱서블 밀링
필터 선택
필터
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
- P Steel (1797)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1662)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1795)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1795)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1765)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1765)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1736)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1750)
- M Stainless Steel (1768)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1767)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1767)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1765)
- K Cast Iron (1816)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1814)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1761)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1761)
- N Non-Ferrous Materials (1250)
- N1Wrought Aluminum (1247)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1249)
- N3High-Silicon Aluminum Alloys Si >12.2%(1207)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (75)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (74)
- N6Carbon, Graphite Composites, CFRP (74)
- N7MMC's (74)
- S High-Temp Alloys (1715)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1551)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1548)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1548)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1712)
- H Hardened Materials (1220)
- H1Hardened Materials 44-48 HRC(1220)
- H2Hardened Materials 48-55 HRC(105)
- H3Hardened Materials 56-60 HRC(105)
Select All Star
- CN (403)
- DE (798)
- GB (156)
- IN (311)
- SG (284)
- US (325)
Applications
Applications
Chamfer Milling (132)
Countersinking (9)
Face Milling (989)
Pocket (534)
Pocket Helical (381)
Pocket Milling (508)
Pocket Plunge Milling (169)
Profile Milling (396)
Ramping (439)
Shoulder Ball Nose (196)
Shoulder Bottom Shoulder (122)
Shoulder Milling (724)
Slot Ball Nose (31)
Slot Milling (571)
Slot Side (79)
Slot Square End (477)
Slot T (4)
=
Cutting Diameter
Cutting Diameter
- 0.197 in(4)
- 0.2714 in(1)
- 0.2762 in(2)
- 0.315 in(3)
- 0.317 in(4)
- 0.3524 in(1)
- 0.354 in(3)
- 0.356 in(1)
- 0.375 in(4)
- 0.3841 in(2)
- 0.3937 in(9)
- 0.394 in(5)
- 0.4212 in(2)
- 0.435 in(1)
- 0.44 in(4)
- 0.4409 in(2)
- 0.4462 in(4)
- 0.46 in(4)
- 0.4618 in(3)
- 0.47 in(2)
- 0.472 in(2)
- 0.4724 in(9)
- 0.5 in(7)
- 0.509 in(1)
- 0.513 in(2)
- 0.528 in(1)
- 0.5365 in(2)
- 0.5463 in(1)
- 0.56 in(1)
- 0.5906 in(1)
- 0.591 in(9)
- 0.606 in(4)
- 0.6157 in(2)
- 0.62 in(5)
- 0.625 in(11)
- 0.6299 in(11)
- 0.63 in(10)
- 0.6314 in(2)
- 0.669 in(1)
- 0.7 in(5)
- 0.709 in(2)
- 0.71 in(2)
- 0.7106 in(3)
- 0.711 in(2)
- 0.72 in(1)
- 0.7204 in(5)
- 0.75 in(17)
- 0.778 in(4)
- 0.78 in(8)
- 0.7853 in(1)
- 0.787 in(16)
- 0.7874 in(10)
- 0.837 in(2)
- 0.8381 in(1)
- 0.856 in(4)
- 0.8598 in(1)
- 0.86 in(3)
- 0.866 in(5)
- 0.879 in(1)
- 0.8791 in(1)
- 0.8889 in(1)
- 0.9055 in(1)
- 0.906 in(3)
- 0.9384 in(1)
- 0.95 in(3)
- 0.9599 in(2)
- 0.98 in(8)
- 0.984 in(32)
- 0.9842 in(1)
- 0.9843 in(7)
- 1.0 in(38)
- 1.02 in(1)
- 1.028 in(2)
- 1.03 in(1)
- 1.0346 in(2)
- 1.072 in(1)
- 1.1 in(1)
- 1.102 in(3)
- 1.1024 in(1)
- 1.1034 in(1)
- 1.106 in(3)
- 1.1132 in(2)
- 1.1289 in(1)
- 1.18 in(1)
- 1.181 in(4)
- 1.2037 in(1)
- 1.25 in(41)
- 1.2528 in(1)
- 1.255 in(1)
- 1.2598 in(10)
- 1.2599 in(1)
- 1.26 in(40)
- 1.2841 in(2)
- 1.304 in(1)
- 1.3314 in(1)
- 1.335 in(2)
- 1.3386 in(2)
- 1.339 in(2)
- 1.37 in(2)
- 1.378 in(2)
- 1.382 in(1)
- 1.417 in(2)
- 1.4173 in(1)
- 1.42 in(2)
- 1.4266 in(2)
- 1.45 in(2)
- 1.4581 in(2)
- 1.496 in(1)
- 1.4961 in(1)
- 1.499 in(2)
- 1.5 in(35)
- 1.5053 in(1)
- 1.528 in(2)
- 1.53 in(1)
- 1.57 in(3)
- 1.5748 in(10)
- 1.575 in(31)
- 1.5828 in(1)
- 1.5972 in(1)
- 1.6024 in(1)
- 1.606 in(2)
- 1.6287 in(1)
- 1.654 in(2)
- 1.75 in(1)
- 1.7641 in(1)
- 1.7836 in(2)
- 1.814 in(2)
- 1.834 in(2)
- 1.85 in(3)
- 1.8504 in(2)
- 1.87 in(1)
- 1.8822 in(1)
- 1.931 in(1)
- 1.932 in(1)
- 1.9382 in(1)
- 1.95 in(1)
- 1.964 in(1)
- 1.967 in(1)
- 1.968 in(4)
- 1.9685 in(16)
- 1.969 in(27)
- 2.0 in(35)
- 2.0079 in(1)
- 2.008 in(1)
- 2.01 in(2)
- 2.028 in(1)
- 2.04 in(1)
- 2.102 in(1)
- 2.126 in(1)
- 2.13 in(1)
- 2.25 in(1)
- 2.2515 in(1)
- 2.27 in(1)
- 2.2834 in(2)
- 2.328 in(1)
- 2.333 in(3)
- 2.37 in(2)
- 2.4331 in(1)
- 2.45 in(1)
- 2.48 in(27)
- 2.4803 in(19)
- 2.483 in(2)
- 2.5 in(26)
- 2.5197 in(2)
- 2.52 in(3)
- 2.528 in(1)
- 2.6 in(1)
- 2.677 in(1)
- 2.6772 in(1)
- 2.68 in(2)
- 3.0 in(36)
- 3.0369 in(1)
- 3.0999 in(1)
- 3.149 in(1)
- 3.1496 in(22)
- 3.15 in(28)
- 3.2203 in(1)
- 3.25 in(2)
- 3.27 in(2)
- 3.283 in(2)
- 3.307 in(2)
- 3.3071 in(2)
- 3.333 in(2)
- 3.37 in(2)
- 3.4646 in(1)
- 3.465 in(3)
- 3.528 in(1)
- 3.937 in(45)
- 4.0 in(31)
- 4.0209 in(1)
- 4.0985 in(1)
- 4.25 in(2)
- 4.254 in(2)
- 4.2831 in(1)
- 4.291 in(2)
- 4.2913 in(2)
- 4.333 in(1)
- 4.92 in(1)
- 4.921 in(24)
- 4.9213 in(23)
- 5.0 in(17)
- 5.25 in(1)
- 5.332 in(1)
- 5.6693 in(1)
- 6.0 in(21)
- 6.298 in(2)
- 6.299 in(3)
- 6.2992 in(26)
- 7.87 in(2)
- 7.874 in(23)
- 8.0 in(11)
- 9.84 in(2)
- 9.8425 in(14)
- 9.843 in(1)
- 10.0 in(4)
- 12.0 in(4)
- 12.4 in(2)
- 12.4016 in(8)
- 12.402 in(1)
Cutting Diameter Min값 입력받는 사람Cutting Diameter MaxCutting Diameter
=
Cutting Diameter
Cutting Diameter
- 5.0 mm(4)
- 6.895 mm(1)
- 7.014 mm(1)
- 7.015 mm(1)
- 8.0 mm(7)
- 8.952 mm(1)
- 9.0 mm(3)
- 9.042 mm(1)
- 9.52 mm(1)
- 9.525 mm(3)
- 9.757 mm(2)
- 10.0 mm(14)
- 10.699 mm(2)
- 11.049 mm(1)
- 11.2 mm(3)
- 11.3 mm(3)
- 11.333 mm(4)
- 11.6 mm(3)
- 11.7 mm(1)
- 11.73 mm(3)
- 12.0 mm(13)
- 12.7 mm(7)
- 13.0 mm(3)
- 13.626 mm(2)
- 13.875 mm(1)
- 14.1 mm(1)
- 14.783 mm(1)
- 15.0 mm(10)
- 15.4 mm(4)
- 15.639 mm(2)
- 15.875 mm(7)
- 15.88 mm(3)
- 15.9 mm(1)
- 16.0 mm(26)
- 16.038 mm(2)
- 17.0 mm(1)
- 17.8 mm(2)
- 18.0 mm(6)
- 18.048 mm(3)
- 18.06 mm(1)
- 18.1 mm(2)
- 18.2 mm(1)
- 18.297 mm(5)
- 19.05 mm(17)
- 19.75 mm(3)
- 19.781 mm(1)
- 19.946 mm(1)
- 20.0 mm(34)
- 21.27 mm(2)
- 21.289 mm(1)
- 21.75 mm(4)
- 21.84 mm(1)
- 22.0 mm(8)
- 22.327 mm(1)
- 22.328 mm(1)
- 22.577 mm(1)
- 23.0 mm(4)
- 23.835 mm(1)
- 24.1 mm(1)
- 24.2 mm(2)
- 24.382 mm(2)
- 24.9 mm(1)
- 25.0 mm(47)
- 25.4 mm(38)
- 26.0 mm(1)
- 26.1 mm(3)
- 26.279 mm(2)
- 27.228 mm(1)
- 28.0 mm(5)
- 28.026 mm(1)
- 28.1 mm(3)
- 28.276 mm(2)
- 28.674 mm(1)
- 30.0 mm(5)
- 30.573 mm(1)
- 31.7 mm(7)
- 31.75 mm(25)
- 31.821 mm(1)
- 31.873 mm(1)
- 32.0 mm(60)
- 32.616 mm(2)
- 33.11 mm(1)
- 33.819 mm(1)
- 33.91 mm(2)
- 34.0 mm(4)
- 34.235 mm(1)
- 34.798 mm(1)
- 34.8 mm(1)
- 35.0 mm(2)
- 35.11 mm(1)
- 36.0 mm(5)
- 36.235 mm(1)
- 36.8 mm(2)
- 37.035 mm(2)
- 38.0 mm(4)
- 38.07 mm(2)
- 38.1 mm(33)
- 38.234 mm(1)
- 38.8 mm(2)
- 38.862 mm(1)
- 39.875 mm(1)
- 40.0 mm(43)
- 40.203 mm(1)
- 40.57 mm(1)
- 40.702 mm(1)
- 40.8 mm(2)
- 41.37 mm(1)
- 42.0 mm(2)
- 44.4 mm(1)
- 44.809 mm(1)
- 45.304 mm(2)
- 46.09 mm(2)
- 46.59 mm(2)
- 47.0 mm(5)
- 47.5 mm(1)
- 47.807 mm(1)
- 49.051 mm(1)
- 49.08 mm(1)
- 49.23 mm(1)
- 49.5 mm(1)
- 49.875 mm(1)
- 50.0 mm(48)
- 50.8 mm(35)
- 51.0 mm(4)
- 51.5 mm(1)
- 51.9 mm(1)
- 53.39 mm(1)
- 54.0 mm(2)
- 57.1 mm(1)
- 57.187 mm(1)
- 57.7 mm(1)
- 57.997 mm(2)
- 59.14 mm(1)
- 59.27 mm(3)
- 60.2 mm(2)
- 61.801 mm(1)
- 62.2 mm(1)
- 63.0 mm(46)
- 63.07 mm(2)
- 63.5 mm(26)
- 64.0 mm(5)
- 64.2 mm(1)
- 66.0 mm(1)
- 68.0 mm(4)
- 76.2 mm(35)
- 76.4 mm(1)
- 77.137 mm(1)
- 78.736 mm(1)
- 80.0 mm(51)
- 81.795 mm(1)
- 82.5 mm(2)
- 83.06 mm(2)
- 83.389 mm(2)
- 84.0 mm(4)
- 84.65 mm(2)
- 85.6 mm(2)
- 88.0 mm(4)
- 89.6 mm(1)
- 100.0 mm(46)
- 101.6 mm(31)
- 102.132 mm(1)
- 104.102 mm(1)
- 107.9 mm(2)
- 108.05 mm(2)
- 108.792 mm(1)
- 109.0 mm(4)
- 110.05 mm(1)
- 125.0 mm(48)
- 127.0 mm(17)
- 133.3 mm(1)
- 135.44 mm(1)
- 144.0 mm(1)
- 152.4 mm(21)
- 160.0 mm(34)
- 200.0 mm(26)
- 203.197 mm(1)
- 203.2 mm(10)
- 250.0 mm(17)
- 254.0 mm(4)
- 304.8 mm(4)
- 315.0 mm(11)
Cutting Diameter Min값 입력받는 사람Cutting Diameter MaxCutting Diameter
=
Maximum Cutting Diameter
Maximum Cutting Diameter
- 12.0 mm(4)
- 12.7 mm(1)
- 13.0 mm(4)
- 15.0 mm(4)
- 15.875 mm(1)
- 16.0 mm(8)
- 17.0 mm(4)
- 18.0 mm(1)
- 19.05 mm(4)
- 20.0 mm(12)
- 22.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(23)
- 25.4 mm(14)
- 26.0 mm(2)
- 28.0 mm(2)
- 28.8 mm(2)
- 30.0 mm(2)
- 31.75 mm(17)
- 32.0 mm(22)
- 33.72 mm(6)
- 33.8 mm(1)
- 34.12 mm(3)
- 35.0 mm(6)
- 37.8 mm(2)
- 38.1 mm(14)
- 38.4 mm(1)
- 38.7 mm(1)
- 39.13 mm(1)
- 39.53 mm(1)
- 40.0 mm(12)
- 40.47 mm(1)
- 40.72 mm(6)
- 42.0 mm(8)
- 44.8 mm(2)
- 46.14 mm(2)
- 46.79 mm(1)
- 46.816 mm(2)
- 46.817 mm(1)
- 48.716 mm(2)
- 50.0 mm(19)
- 50.8 mm(19)
- 50.96 mm(2)
- 51.0 mm(1)
- 52.0 mm(13)
- 52.24 mm(1)
- 52.3 mm(1)
- 54.14 mm(1)
- 56.4 mm(1)
- 56.76 mm(1)
- 57.159 mm(1)
- 57.56 mm(1)
- 58.71 mm(3)
- 58.875 mm(1)
- 59.51 mm(3)
- 60.733 mm(1)
- 61.0 mm(2)
- 61.534 mm(1)
- 61.8 mm(2)
- 63.0 mm(15)
- 63.386 mm(2)
- 63.5 mm(10)
- 64.14 mm(1)
- 64.94 mm(1)
- 66.0 mm(7)
- 66.7 mm(1)
- 67.89 mm(1)
- 68.69 mm(1)
- 69.4 mm(1)
- 69.75 mm(1)
- 71.54 mm(1)
- 71.706 mm(3)
- 71.877 mm(1)
- 72.04 mm(1)
- 72.205 mm(3)
- 73.732 mm(1)
- 74.0 mm(3)
- 74.234 mm(1)
- 74.5 mm(2)
- 74.799 mm(1)
- 76.2 mm(13)
- 76.5 mm(1)
- 77.13 mm(1)
- 77.63 mm(1)
- 79.7 mm(1)
- 80.0 mm(14)
- 80.378 mm(2)
- 80.381 mm(1)
- 80.874 mm(1)
- 81.374 mm(1)
- 82.578 mm(1)
- 82.66 mm(1)
- 82.95 mm(1)
- 84.73 mm(2)
- 84.9 mm(3)
- 85.0341 mm(1)
- 86.4 mm(1)
- 86.447 mm(1)
- 86.75 mm(2)
- 86.9315 mm(1)
- 87.2 mm(3)
- 88.0 mm(2)
- 88.52 mm(2)
- 88.7 mm(3)
- 88.834 mm(1)
- 90.32 mm(1)
- 90.424 mm(1)
- 90.732 mm(1)
- 91.0 mm(3)
- 91.8 mm(2)
- 94.082 mm(1)
- 94.12 mm(1)
- 94.3 mm(1)
- 97.88 mm(1)
- 100.0 mm(12)
- 100.378 mm(2)
- 100.382 mm(1)
- 101.6 mm(10)
- 101.9785 mm(2)
- 101.981 mm(1)
- 106.4 mm(2)
- 106.447 mm(1)
- 106.74 mm(2)
- 108.0592 mm(1)
- 108.36 mm(1)
- 108.51 mm(2)
- 108.696 mm(3)
- 108.836 mm(1)
- 110.296 mm(3)
- 110.4367 mm(1)
- 110.731 mm(1)
- 110.98 mm(3)
- 111.799 mm(1)
- 111.8 mm(1)
- 112.3315 mm(1)
- 112.58 mm(5)
- 113.4 mm(3)
- 116.9 mm(1)
- 117.856 mm(1)
- 119.456 mm(1)
- 123.6 mm(1)
- 125.0 mm(7)
- 125.379 mm(2)
- 125.382 mm(1)
- 127.0 mm(5)
- 131.4 mm(1)
- 131.447 mm(1)
- 131.74 mm(2)
- 133.5 mm(1)
- 133.712 mm(3)
- 133.735 mm(1)
- 133.838 mm(1)
- 135.706 mm(1)
- 135.731 mm(1)
- 135.8392 mm(1)
- 135.94 mm(2)
- 135.98 mm(1)
- 136.747 mm(1)
- 136.799 mm(1)
- 137.7315 mm(1)
- 137.751 mm(1)
- 137.95 mm(3)
- 138.3 mm(1)
- 142.878 mm(1)
- 144.882 mm(1)
- 152.4 mm(2)
- 152.7785 mm(2)
- 152.7835 mm(1)
- 158.8465 mm(1)
- 160.0 mm(1)
- 160.379 mm(2)
- 160.382 mm(1)
- 161.2392 mm(1)
- 163.1315 mm(1)
- 163.33 mm(1)
- 163.37 mm(2)
- 164.147 mm(1)
- 164.2 mm(1)
- 165.1432 mm(1)
- 166.445 mm(1)
- 168.5 mm(1)
- 168.839 mm(1)
- 170.731 mm(1)
- 170.97 mm(2)
- 171.747 mm(1)
- 171.8 mm(1)
- 172.744 mm(1)
- 173.3 mm(1)
- 200.38 mm(2)
- 200.383 mm(1)
- 203.5785 mm(2)
- 203.5835 mm(1)
- 208.84 mm(1)
- 210.988 mm(1)
- 211.747 mm(1)
- 211.8 mm(1)
- 212.0392 mm(1)
- 212.736 mm(1)
- 214.179 mm(1)
- 214.195 mm(1)
- 215.9356 mm(1)
- 250.38 mm(2)
- 250.383 mm(1)
- 258.841 mm(1)
- 260.992 mm(1)
- 261.747 mm(1)
- 261.8 mm(1)
- 262.735 mm(1)
- 264.662 mm(1)
- 264.992 mm(1)
- 266.7356 mm(1)
- 315.791 mm(1)
- 317.5356 mm(1)
- 323.841 mm(1)
- 325.995 mm(1)
- 327.735 mm(1)
Maximum Cutting Diameter Min값 입력받는 사람Maximum Cutting Diameter MaxMaximum Cutting Diameter
=
Maximum Cutting Diameter
Maximum Cutting Diameter
- 0.472 in(4)
- 0.512 in(4)
- 0.591 in(4)
- 0.625 in(1)
- 0.6299 in(5)
- 0.63 in(3)
- 0.669 in(4)
- 0.7087 in(1)
- 0.75 in(4)
- 0.787 in(9)
- 0.7874 in(4)
- 0.866 in(2)
- 0.9449 in(1)
- 0.984 in(19)
- 0.9843 in(7)
- 1.0 in(14)
- 1.0236 in(2)
- 1.102 in(2)
- 1.134 in(2)
- 1.181 in(1)
- 1.1811 in(1)
- 1.25 in(17)
- 1.2598 in(8)
- 1.26 in(14)
- 1.328 in(6)
- 1.331 in(1)
- 1.343 in(3)
- 1.378 in(6)
- 1.432 in(1)
- 1.488 in(2)
- 1.5 in(15)
- 1.524 in(1)
- 1.54 in(1)
- 1.556 in(1)
- 1.5748 in(5)
- 1.575 in(7)
- 1.593 in(1)
- 1.603 in(6)
- 1.653 in(1)
- 1.6535 in(3)
- 1.654 in(4)
- 1.764 in(2)
- 1.813 in(2)
- 1.817 in(2)
- 1.842 in(1)
- 1.843 in(1)
- 1.918 in(2)
- 1.968 in(1)
- 1.9685 in(8)
- 1.969 in(8)
- 1.97 in(2)
- 2.0 in(19)
- 2.006 in(2)
- 2.008 in(1)
- 2.047 in(9)
- 2.0472 in(3)
- 2.05 in(1)
- 2.057 in(1)
- 2.059 in(1)
- 2.131 in(1)
- 2.2205 in(1)
- 2.235 in(1)
- 2.2511 in(1)
- 2.266 in(1)
- 2.3114 in(3)
- 2.3179 in(1)
- 2.343 in(3)
- 2.3911 in(1)
- 2.401 in(2)
- 2.4226 in(1)
- 2.434 in(2)
- 2.48 in(9)
- 2.4803 in(6)
- 2.4955 in(2)
- 2.5 in(10)
- 2.525 in(1)
- 2.557 in(1)
- 2.598 in(4)
- 2.5984 in(2)
- 2.6 in(1)
- 2.626 in(1)
- 2.673 in(1)
- 2.704 in(1)
- 2.7323 in(1)
- 2.746 in(1)
- 2.816 in(1)
- 2.8231 in(3)
- 2.8298 in(1)
- 2.836 in(1)
- 2.843 in(3)
- 2.9028 in(1)
- 2.913 in(3)
- 2.9226 in(1)
- 2.933 in(2)
- 2.9448 in(1)
- 3.0 in(13)
- 3.012 in(1)
- 3.037 in(1)
- 3.056 in(1)
- 3.138 in(1)
- 3.149 in(1)
- 3.1496 in(2)
- 3.15 in(11)
- 3.1645 in(2)
- 3.1646 in(1)
- 3.184 in(1)
- 3.204 in(1)
- 3.2511 in(1)
- 3.2543 in(1)
- 3.266 in(1)
- 3.336 in(2)
- 3.343 in(3)
- 3.3478 in(1)
- 3.4016 in(1)
- 3.4034 in(1)
- 3.415 in(2)
- 3.4225 in(1)
- 3.433 in(3)
- 3.4646 in(2)
- 3.485 in(2)
- 3.4921 in(1)
- 3.4974 in(1)
- 3.556 in(1)
- 3.56 in(1)
- 3.5721 in(1)
- 3.582 in(2)
- 3.583 in(1)
- 3.6142 in(2)
- 3.704 in(1)
- 3.706 in(1)
- 3.713 in(1)
- 3.853 in(1)
- 3.937 in(12)
- 3.9519 in(2)
- 3.952 in(1)
- 4.0 in(10)
- 4.0149 in(2)
- 4.015 in(1)
- 4.189 in(2)
- 4.1908 in(1)
- 4.202 in(2)
- 4.2543 in(1)
- 4.266 in(1)
- 4.272 in(2)
- 4.2849 in(1)
- 4.342 in(3)
- 4.3479 in(1)
- 4.3595 in(1)
- 4.369 in(1)
- 4.3694 in(2)
- 4.4015 in(1)
- 4.4016 in(1)
- 4.4225 in(1)
- 4.432 in(1)
- 4.4324 in(4)
- 4.4646 in(2)
- 4.465 in(1)
- 4.602 in(1)
- 4.64 in(1)
- 4.703 in(1)
- 4.921 in(4)
- 4.9213 in(3)
- 4.9362 in(2)
- 4.9363 in(1)
- 5.0 in(5)
- 5.1732 in(1)
- 5.1751 in(1)
- 5.186 in(2)
- 5.256 in(1)
- 5.264 in(3)
- 5.265 in(1)
- 5.2692 in(1)
- 5.343 in(1)
- 5.3437 in(1)
- 5.348 in(1)
- 5.3518 in(1)
- 5.352 in(1)
- 5.3534 in(1)
- 5.3837 in(1)
- 5.3858 in(1)
- 5.4225 in(1)
- 5.4233 in(1)
- 5.431 in(1)
- 5.4312 in(2)
- 5.445 in(1)
- 5.625 in(1)
- 5.704 in(1)
- 6.0 in(2)
- 6.0149 in(2)
- 6.0151 in(1)
- 6.2538 in(1)
- 6.2992 in(1)
- 6.3141 in(2)
- 6.3143 in(1)
- 6.348 in(1)
- 6.4225 in(1)
- 6.4302 in(1)
- 6.4318 in(2)
- 6.4625 in(1)
- 6.4646 in(1)
- 6.5017 in(1)
- 6.553 in(1)
- 6.634 in(1)
- 6.6472 in(1)
- 6.7217 in(1)
- 6.731 in(2)
- 6.7617 in(1)
- 6.7638 in(1)
- 6.8009 in(1)
- 6.823 in(1)
- 7.889 in(2)
- 7.8891 in(1)
- 8.0149 in(2)
- 8.0151 in(1)
- 8.222 in(1)
- 8.307 in(1)
- 8.3365 in(1)
- 8.3386 in(1)
- 8.348 in(1)
- 8.3754 in(1)
- 8.432 in(1)
- 8.433 in(1)
- 8.5014 in(1)
- 9.8575 in(2)
- 9.8576 in(1)
- 10.1906 in(1)
- 10.275 in(1)
- 10.305 in(1)
- 10.3071 in(1)
- 10.3439 in(1)
- 10.433 in(2)
- 10.5014 in(1)
- 12.433 in(1)
- 12.5014 in(1)
- 12.7496 in(1)
- 12.834 in(1)
- 12.903 in(1)
- 33.53 in(1)
Maximum Cutting Diameter Min값 입력받는 사람Maximum Cutting Diameter MaxMaximum Cutting Diameter
=
Cutting Length
Cutting Length
- 0.56 mm(3)
- 0.6 mm(6)
- 0.62 mm(3)
- 0.9 mm(23)
- 0.92 mm(3)
- 1.01 mm(1)
- 1.016 mm(1)
- 1.1 mm(3)
- 1.12 mm(3)
- 1.25 mm(35)
- 1.5 mm(28)
- 1.7 mm(12)
- 2.0 mm(25)
- 2.1 mm(7)
- 2.2 mm(10)
- 2.5 mm(20)
- 2.7 mm(1)
- 3.0 mm(27)
- 3.5 mm(74)
- 3.505 mm(1)
- 3.7 mm(12)
- 3.97 mm(16)
- 4.0 mm(6)
- 4.35 mm(1)
- 4.4 mm(2)
- 4.44 mm(1)
- 4.5 mm(41)
- 4.6 mm(1)
- 4.7 mm(14)
- 4.8 mm(8)
- 4.87 mm(2)
- 4.96 mm(17)
- 5.0 mm(39)
- 6.0 mm(47)
- 6.1 mm(1)
- 6.3 mm(1)
- 6.35 mm(23)
- 6.4 mm(12)
- 7.0 mm(3)
- 7.5 mm(19)
- 8.0 mm(31)
- 8.3 mm(2)
- 9.0 mm(26)
- 9.5 mm(12)
- 9.8 mm(45)
- 10.0 mm(106)
- 10.16 mm(4)
- 10.95 mm(1)
- 11.32 mm(13)
- 11.38 mm(3)
- 11.4 mm(3)
- 11.44 mm(12)
- 11.444 mm(2)
- 11.46 mm(1)
- 11.5 mm(30)
- 11.516 mm(1)
- 11.52 mm(16)
- 11.528 mm(1)
- 11.53 mm(10)
- 11.55 mm(14)
- 11.554 mm(1)
- 11.57 mm(3)
- 11.66 mm(1)
- 11.71 mm(3)
- 12.0 mm(15)
- 12.5 mm(3)
- 12.7 mm(2)
- 13.85 mm(1)
- 13.97 mm(3)
- 14.0 mm(21)
- 14.9 mm(1)
- 15.0 mm(51)
- 15.297 mm(1)
- 15.36 mm(1)
- 15.5 mm(2)
- 15.6 mm(1)
- 15.7 mm(8)
- 15.8 mm(3)
- 15.9 mm(5)
- 16.0 mm(37)
- 16.1 mm(6)
- 16.2 mm(17)
- 16.3 mm(16)
- 16.4 mm(4)
- 17.3 mm(9)
- 17.5 mm(6)
- 17.85 mm(1)
- 20.0 mm(15)
- 21.85 mm(1)
- 28.0 mm(1)
- 37.0 mm(1)
- 42.0 mm(2)
- 42.02 mm(1)
- 42.2 mm(1)
- 42.28 mm(1)
- 42.7 mm(1)
- 42.71 mm(1)
- 43.1 mm(2)
- 43.2 mm(1)
- 43.22 mm(2)
- 46.0 mm(1)
- 51.62 mm(5)
- 56.0 mm(2)
- 60.4 mm(5)
- 64.0 mm(1)
- 70.0 mm(2)
- 74.2 mm(1)
- 75.0 mm(5)
- 84.0 mm(1)
- 85.0 mm(1)
- 104.6 mm(1)
- 112.0 mm(1)
- 117.0 mm(1)
Cutting Length Min값 입력받는 사람Cutting Length MaxCutting Length
=
Cutting Length
Cutting Length
- 0.022 in(3)
- 0.0236 in(6)
- 0.024 in(3)
- 0.0354 in(22)
- 0.0355 in(1)
- 0.036 in(3)
- 0.04 in(2)
- 0.0433 in(3)
- 0.044 in(3)
- 0.049 in(35)
- 0.059 in(4)
- 0.0591 in(24)
- 0.068 in(12)
- 0.078 in(25)
- 0.0827 in(7)
- 0.086 in(1)
- 0.087 in(9)
- 0.0974 in(1)
- 0.0975 in(1)
- 0.0982 in(1)
- 0.0983 in(1)
- 0.0984 in(15)
- 0.0985 in(1)
- 0.1057 in(1)
- 0.117 in(27)
- 0.136 in(2)
- 0.1378 in(10)
- 0.138 in(63)
- 0.1457 in(12)
- 0.156 in(16)
- 0.1575 in(6)
- 0.1712 in(1)
- 0.172 in(2)
- 0.175 in(1)
- 0.176 in(2)
- 0.177 in(38)
- 0.178 in(1)
- 0.18 in(1)
- 0.185 in(8)
- 0.186 in(6)
- 0.1889 in(8)
- 0.1917 in(1)
- 0.192 in(1)
- 0.195 in(16)
- 0.196 in(2)
- 0.1969 in(10)
- 0.197 in(15)
- 0.2 in(13)
- 0.236 in(29)
- 0.2362 in(17)
- 0.24 in(1)
- 0.25 in(23)
- 0.252 in(12)
- 0.2756 in(1)
- 0.276 in(2)
- 0.2953 in(19)
- 0.315 in(30)
- 0.327 in(2)
- 0.354 in(2)
- 0.3543 in(23)
- 0.37 in(8)
- 0.374 in(4)
- 0.3869 in(1)
- 0.387 in(3)
- 0.3871 in(1)
- 0.3872 in(39)
- 0.3873 in(1)
- 0.3937 in(4)
- 0.394 in(102)
- 0.4 in(4)
- 0.431 in(1)
- 0.446 in(13)
- 0.448 in(3)
- 0.449 in(3)
- 0.4506 in(2)
- 0.451 in(13)
- 0.4528 in(29)
- 0.453 in(17)
- 0.4534 in(1)
- 0.4539 in(1)
- 0.454 in(10)
- 0.4549 in(1)
- 0.455 in(14)
- 0.456 in(3)
- 0.459 in(1)
- 0.461 in(3)
- 0.472 in(5)
- 0.4724 in(8)
- 0.4921 in(3)
- 0.5 in(2)
- 0.545 in(1)
- 0.55 in(3)
- 0.551 in(6)
- 0.5512 in(14)
- 0.5866 in(1)
- 0.5906 in(1)
- 0.591 in(49)
- 0.6022 in(1)
- 0.6046 in(1)
- 0.61 in(1)
- 0.6102 in(1)
- 0.616 in(1)
- 0.617 in(2)
- 0.618 in(1)
- 0.6181 in(5)
- 0.621 in(2)
- 0.623 in(2)
- 0.625 in(1)
- 0.626 in(4)
- 0.629 in(4)
- 0.6299 in(25)
- 0.63 in(8)
- 0.635 in(6)
- 0.638 in(17)
- 0.641 in(12)
- 0.642 in(4)
- 0.647 in(4)
- 0.6811 in(9)
- 0.689 in(6)
- 0.703 in(1)
- 0.7874 in(15)
- 0.86 in(1)
- 1.102 in(1)
- 1.457 in(1)
- 1.65 in(1)
- 1.6535 in(1)
- 1.654 in(1)
- 1.6615 in(1)
- 1.6645 in(1)
- 1.6815 in(2)
- 1.6976 in(1)
- 1.7 in(3)
- 1.701 in(1)
- 1.811 in(1)
- 2.03 in(2)
- 2.032 in(1)
- 2.0322 in(2)
- 2.205 in(2)
- 2.38 in(5)
- 2.4803 in(1)
- 2.52 in(1)
- 2.7559 in(1)
- 2.756 in(1)
- 2.9 in(1)
- 2.95 in(2)
- 2.954 in(3)
- 3.3071 in(1)
- 3.346 in(1)
- 4.12 in(1)
- 4.4094 in(1)
- 4.606 in(1)
Cutting Length Min값 입력받는 사람Cutting Length MaxCutting Length
=
Reach
Reach
- 0.5906 in(2)
- 0.709 in(1)
- 0.7165 in(1)
- 0.75 in(1)
- 0.787 in(2)
- 0.791 in(1)
- 0.795 in(1)
- 0.8 in(1)
- 0.803 in(1)
- 0.827 in(3)
- 0.8386 in(1)
- 0.844 in(2)
- 0.846 in(6)
- 0.85 in(1)
- 0.9 in(1)
- 0.906 in(3)
- 0.984 in(17)
- 0.9843 in(4)
- 0.9921 in(1)
- 1.0 in(3)
- 1.063 in(1)
- 1.0708 in(1)
- 1.1 in(3)
- 1.102 in(8)
- 1.17 in(2)
- 1.181 in(11)
- 1.1811 in(5)
- 1.1857 in(1)
- 1.22 in(16)
- 1.2205 in(1)
- 1.221 in(1)
- 1.25 in(16)
- 1.2598 in(5)
- 1.2599 in(4)
- 1.26 in(22)
- 1.282 in(1)
- 1.2864 in(1)
- 1.298 in(1)
- 1.299 in(2)
- 1.3779 in(2)
- 1.378 in(10)
- 1.437 in(1)
- 1.47 in(3)
- 1.499 in(2)
- 1.5 in(25)
- 1.535 in(4)
- 1.5354 in(3)
- 1.5655 in(1)
- 1.5669 in(1)
- 1.57 in(10)
- 1.574 in(2)
- 1.5748 in(71)
- 1.5749 in(3)
- 1.575 in(163)
- 1.577 in(9)
- 1.58 in(4)
- 1.5945 in(1)
- 1.6 in(6)
- 1.61 in(2)
- 1.614 in(5)
- 1.63 in(2)
- 1.6535 in(1)
- 1.654 in(3)
- 1.69 in(1)
- 1.6929 in(8)
- 1.693 in(12)
- 1.7 in(2)
- 1.72 in(8)
- 1.732 in(3)
- 1.7323 in(3)
- 1.75 in(49)
- 1.7618 in(1)
- 1.7716 in(2)
- 1.7717 in(3)
- 1.772 in(7)
- 1.8 in(3)
- 1.81 in(2)
- 1.811 in(1)
- 1.8898 in(2)
- 1.9 in(2)
- 1.929 in(3)
- 1.968 in(16)
- 1.9681 in(1)
- 1.9684 in(1)
- 1.9685 in(62)
- 1.9686 in(3)
- 1.969 in(90)
- 1.97 in(7)
- 1.9882 in(1)
- 2.0 in(66)
- 2.0244 in(1)
- 2.0374 in(2)
- 2.0866 in(2)
- 2.1 in(2)
- 2.165 in(1)
- 2.1654 in(1)
- 2.2047 in(2)
- 2.2048 in(1)
- 2.22 in(1)
- 2.244 in(4)
- 2.2441 in(1)
- 2.25 in(10)
- 2.3 in(4)
- 2.362 in(7)
- 2.3622 in(3)
- 2.375 in(4)
- 2.38 in(44)
- 2.3819 in(1)
- 2.4 in(1)
- 2.402 in(1)
- 2.4494 in(1)
- 2.48 in(37)
- 2.4801 in(1)
- 2.4803 in(55)
- 2.4804 in(1)
- 2.481 in(2)
- 2.5 in(5)
- 2.51 in(1)
- 2.52 in(1)
- 2.559 in(1)
- 2.5591 in(1)
- 2.5986 in(1)
- 2.677 in(1)
- 2.6772 in(2)
- 2.68 in(1)
- 2.75 in(3)
- 2.7559 in(4)
- 2.756 in(5)
- 2.8 in(4)
- 2.947 in(1)
- 2.9527 in(2)
- 2.9528 in(2)
- 2.953 in(3)
- 2.9966 in(1)
- 3.0 in(3)
- 3.1496 in(4)
- 3.15 in(11)
- 3.19 in(1)
- 3.228 in(2)
- 3.346 in(3)
- 3.4252 in(2)
- 3.5 in(7)
- 3.6614 in(2)
- 3.75 in(1)
- 3.7756 in(1)
- 3.86 in(1)
- 3.937 in(5)
- 4.0 in(4)
- 4.213 in(1)
- 4.3661 in(1)
- 4.9213 in(2)
- 5.3504 in(1)
- 5.394 in(1)
- 5.5 in(1)
Reach Min값 입력받는 사람Reach MaxReach
=
Reach
Reach
- 15.0 mm(2)
- 17.0 mm(3)
- 18.0 mm(1)
- 18.2 mm(1)
- 19.1 mm(1)
- 20.0 mm(2)
- 20.1 mm(1)
- 20.2 mm(1)
- 20.32 mm(1)
- 20.4 mm(1)
- 21.0 mm(4)
- 21.44 mm(2)
- 21.5 mm(6)
- 21.59 mm(1)
- 22.86 mm(1)
- 23.0 mm(3)
- 25.0 mm(21)
- 25.2 mm(1)
- 25.4 mm(3)
- 27.0 mm(1)
- 27.1978 mm(1)
- 27.94 mm(3)
- 28.0 mm(8)
- 29.72 mm(2)
- 30.0 mm(16)
- 30.1168 mm(1)
- 30.99 mm(8)
- 31.0 mm(10)
- 31.7 mm(1)
- 31.75 mm(15)
- 32.0 mm(31)
- 32.55 mm(1)
- 32.674 mm(1)
- 33.0 mm(3)
- 35.0 mm(12)
- 36.5 mm(1)
- 37.34 mm(3)
- 38.09 mm(1)
- 38.1 mm(26)
- 39.0 mm(7)
- 39.7637 mm(1)
- 39.8 mm(1)
- 39.878 mm(4)
- 39.88 mm(3)
- 40.0 mm(238)
- 40.005 mm(7)
- 40.006 mm(1)
- 40.05 mm(9)
- 40.5 mm(1)
- 40.64 mm(6)
- 40.89 mm(2)
- 41.0 mm(5)
- 41.402 mm(2)
- 42.0 mm(4)
- 42.93 mm(1)
- 43.0 mm(20)
- 43.18 mm(2)
- 43.688 mm(2)
- 43.69 mm(6)
- 44.0 mm(6)
- 44.4 mm(2)
- 44.44 mm(1)
- 44.45 mm(44)
- 44.5 mm(2)
- 44.75 mm(1)
- 45.0 mm(12)
- 45.72 mm(3)
- 45.97 mm(2)
- 46.0 mm(1)
- 48.0 mm(2)
- 48.26 mm(2)
- 49.0 mm(3)
- 49.991 mm(1)
- 50.0 mm(178)
- 50.04 mm(1)
- 50.5 mm(1)
- 50.79 mm(1)
- 50.8 mm(65)
- 51.4198 mm(1)
- 51.75 mm(2)
- 53.0 mm(2)
- 53.34 mm(2)
- 55.0 mm(2)
- 56.0 mm(3)
- 56.388 mm(1)
- 57.0 mm(6)
- 57.14 mm(1)
- 57.147 mm(1)
- 57.15 mm(7)
- 58.41 mm(1)
- 58.42 mm(3)
- 60.0 mm(10)
- 60.325 mm(2)
- 60.33 mm(2)
- 60.45 mm(8)
- 60.452 mm(36)
- 60.5 mm(1)
- 60.96 mm(1)
- 61.0 mm(1)
- 62.2148 mm(1)
- 62.992 mm(4)
- 63.0 mm(90)
- 63.5 mm(4)
- 63.51 mm(1)
- 63.75 mm(1)
- 64.0 mm(1)
- 65.0 mm(2)
- 68.0 mm(4)
- 69.85 mm(2)
- 69.851 mm(1)
- 70.0 mm(9)
- 71.12 mm(4)
- 75.0 mm(8)
- 76.114 mm(1)
- 76.2 mm(3)
- 80.0 mm(13)
- 80.01 mm(2)
- 81.026 mm(1)
- 82.0 mm(2)
- 85.0 mm(3)
- 87.0 mm(2)
- 88.9 mm(7)
- 93.0 mm(2)
- 95.25 mm(1)
- 95.9 mm(1)
- 98.044 mm(1)
- 100.0 mm(5)
- 101.6 mm(4)
- 107.0 mm(1)
- 110.9 mm(1)
- 125.0 mm(2)
- 135.9 mm(1)
- 137.0 mm(1)
- 139.7 mm(1)
Reach Min값 입력받는 사람Reach MaxReach
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 10.0 (13)
- 11.0 (6)
- 12.0 (53)
- 14.0 (28)
- 15.0 (47)
- 16.0 (12)
- 18.0 (1)
- 32.0 (2)
- 42.0 (7)
- 43.0 (12)
- 45.0 (118)
- 56.0 (19)
- 58.0 (33)
- 64.0 (14)
- 70.0 (9)
- 75.0 (4)
- 88.85 (1)
- 89.0 (29)
- 89.14 (1)
- 90.0 (765)
- 90.25 (2)
- 90.28 (2)
- 90.4 (4)
Tool Cutting Edge Angle Min값 입력받는 사람Tool Cutting Edge Angle MaxTool Cutting Edge Angle
Connection Style
Connection Style
- 2 Key & Cutter Retention Screw (42)
- 2 Key & Socket Head Cap Screw (1)
- A-Socket Head Cap Screw (466)
- B-Cutter Retention Screw (99)
- C-Bolt Circle (66)
- DV-DIN69871 (6)
- HSK (4)
- KL Screw (4)
- SHCS or RetScrw Or BoltCircle (17)
- Screw-On Connection (96)
- Short Taper Nose Collar (6)
- Straight-Cylindrical (236)
- Weldon (130)
- Weldon With Thread (5)
Number of Flutes
Number of Flutes
- 1 (3)
- 10 (40)
- 11 (11)
- 12 (38)
- 13 (2)
- 14 (14)
- 15 (6)
- 16 (18)
- 18 (11)
- 2 (188)
- 20 (6)
- 22 (5)
- 24 (8)
- 28 (3)
- 3 (173)
- 4 (187)
- 5 (161)
- 6 (126)
- 7 (54)
- 8 (81)
- 9 (43)
=
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (20)
- 1.0 (350)
- 2.0 (891)
- 3.0 (115)
- 4.0 (564)
- 6.0 (171)
- 8.0 (122)
- 12.0 (255)
- 16.0 (31)
Cutting Edges Per Insert Min값 입력받는 사람Cutting Edges Per Insert MaxCutting Edges Per Insert
=
Over All Length [L]
Over All Length [L]
- 1.1496 in(3)
- 1.2598 in(3)
- 1.2599 in(4)
- 1.4488 in(3)
- 1.5 in(3)
- 1.57 in(10)
- 1.5748 in(50)
- 1.5749 in(2)
- 1.575 in(120)
- 1.5751 in(1)
- 1.577 in(9)
- 1.58 in(4)
- 1.602 in(3)
- 1.63 in(2)
- 1.6535 in(2)
- 1.654 in(1)
- 1.681 in(2)
- 1.6811 in(1)
- 1.7323 in(3)
- 1.75 in(42)
- 1.7618 in(1)
- 1.7716 in(2)
- 1.7717 in(2)
- 1.772 in(3)
- 1.811 in(1)
- 1.85 in(2)
- 1.8504 in(15)
- 1.851 in(1)
- 1.8512 in(1)
- 1.854 in(4)
- 1.8543 in(2)
- 1.887 in(1)
- 1.89 in(2)
- 1.968 in(13)
- 1.9681 in(1)
- 1.9684 in(1)
- 1.9685 in(56)
- 1.9686 in(3)
- 1.969 in(73)
- 1.97 in(6)
- 2.0 in(51)
- 2.0374 in(2)
- 2.047 in(1)
- 2.0472 in(3)
- 2.0866 in(2)
- 2.116 in(2)
- 2.1161 in(1)
- 2.126 in(4)
- 2.157 in(1)
- 2.165 in(2)
- 2.1653 in(1)
- 2.1654 in(1)
- 2.224 in(1)
- 2.244 in(5)
- 2.2441 in(3)
- 2.245 in(1)
- 2.3228 in(1)
- 2.323 in(1)
- 2.362 in(1)
- 2.3622 in(2)
- 2.375 in(4)
- 2.38 in(44)
- 2.402 in(1)
- 2.406 in(1)
- 2.4646 in(4)
- 2.465 in(6)
- 2.48 in(40)
- 2.4801 in(1)
- 2.4803 in(61)
- 2.4804 in(1)
- 2.481 in(2)
- 2.5 in(3)
- 2.539 in(10)
- 2.5394 in(6)
- 2.5591 in(1)
- 2.5986 in(1)
- 2.6378 in(1)
- 2.657 in(6)
- 2.6575 in(6)
- 2.6576 in(1)
- 2.6645 in(1)
- 2.677 in(1)
- 2.68 in(1)
- 2.736 in(1)
- 2.75 in(4)
- 2.7559 in(2)
- 2.756 in(4)
- 2.8346 in(1)
- 2.874 in(1)
- 2.913 in(1)
- 2.953 in(3)
- 3.0 in(1)
- 3.11 in(3)
- 3.1102 in(1)
- 3.1496 in(1)
- 3.15 in(11)
- 3.189 in(3)
- 3.2 in(2)
- 3.228 in(2)
- 3.2283 in(1)
- 3.25 in(5)
- 3.2701 in(1)
- 3.28 in(2)
- 3.346 in(3)
- 3.386 in(1)
- 3.397 in(2)
- 3.465 in(3)
- 3.5 in(8)
- 3.504 in(6)
- 3.53 in(1)
- 3.543 in(5)
- 3.5433 in(2)
- 3.583 in(1)
- 3.6 in(2)
- 3.622 in(1)
- 3.7402 in(1)
- 3.75 in(4)
- 3.7795 in(5)
- 3.78 in(2)
- 3.783 in(1)
- 3.819 in(2)
- 3.856 in(3)
- 3.937 in(22)
- 3.976 in(1)
- 4.0 in(18)
- 4.03 in(1)
- 4.1339 in(1)
- 4.134 in(1)
- 4.213 in(1)
- 4.28 in(2)
- 4.3 in(3)
- 4.331 in(18)
- 4.3504 in(1)
- 4.37 in(2)
- 4.4488 in(1)
- 4.5 in(9)
- 4.528 in(1)
- 4.53 in(9)
- 4.6063 in(2)
- 4.69 in(1)
- 4.724 in(11)
- 4.7244 in(2)
- 4.8 in(5)
- 4.921 in(2)
- 5.03 in(1)
- 5.118 in(9)
- 5.157 in(1)
- 5.1969 in(1)
- 5.2 in(3)
- 5.2324 in(1)
- 5.2362 in(3)
- 5.25 in(1)
- 5.2799 in(1)
- 5.28 in(1)
- 5.315 in(2)
- 5.4331 in(1)
- 5.5 in(2)
- 5.5118 in(2)
- 5.512 in(5)
- 5.53 in(1)
- 5.55 in(3)
- 5.59 in(1)
- 5.5906 in(1)
- 5.7087 in(3)
- 5.75 in(5)
- 5.905 in(1)
- 5.906 in(12)
- 6.0 in(14)
- 6.03 in(1)
- 6.102 in(1)
- 6.1024 in(2)
- 6.15 in(1)
- 6.28 in(1)
- 6.299 in(4)
- 6.2992 in(2)
- 6.6929 in(2)
- 6.693 in(10)
- 6.7 in(5)
- 7.0 in(5)
- 7.0866 in(3)
- 7.087 in(4)
- 7.2047 in(1)
- 7.3622 in(1)
- 7.4803 in(1)
- 7.5 in(1)
- 7.6772 in(1)
- 7.686 in(1)
- 7.874 in(25)
- 8.0 in(18)
- 8.0709 in(1)
- 8.15 in(1)
- 8.268 in(4)
- 8.5433 in(1)
- 8.661 in(1)
- 8.6614 in(1)
- 9.0 in(2)
- 9.1339 in(1)
- 9.134 in(1)
- 9.25 in(1)
- 9.8 in(4)
- 9.8425 in(2)
- 9.843 in(5)
- 10.0 in(2)
- 10.1181 in(1)
- 10.315 in(1)
- 11.811 in(2)
Over All Length [L] Min값 입력받는 사람Over All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 29.2 mm(3)
- 32.0 mm(7)
- 36.8 mm(3)
- 38.1 mm(3)
- 39.878 mm(4)
- 39.88 mm(3)
- 40.0 mm(172)
- 40.005 mm(7)
- 40.006 mm(1)
- 40.05 mm(9)
- 40.7 mm(3)
- 41.402 mm(2)
- 42.0 mm(3)
- 42.7 mm(3)
- 44.0 mm(3)
- 44.44 mm(1)
- 44.45 mm(39)
- 44.5 mm(2)
- 44.75 mm(1)
- 45.0 mm(7)
- 46.0 mm(1)
- 47.0 mm(17)
- 47.01 mm(1)
- 47.02 mm(1)
- 47.09 mm(3)
- 47.1 mm(3)
- 47.94 mm(1)
- 48.0 mm(2)
- 49.991 mm(1)
- 50.0 mm(151)
- 50.04 mm(1)
- 50.79 mm(1)
- 50.8 mm(50)
- 51.75 mm(2)
- 52.0 mm(4)
- 53.0 mm(2)
- 53.7 mm(1)
- 53.75 mm(2)
- 54.0 mm(4)
- 54.8 mm(1)
- 55.0 mm(4)
- 56.5 mm(1)
- 57.0 mm(8)
- 57.01 mm(1)
- 59.0 mm(2)
- 60.0 mm(3)
- 60.325 mm(2)
- 60.33 mm(2)
- 60.45 mm(8)
- 60.452 mm(36)
- 61.0 mm(1)
- 61.1 mm(1)
- 62.6 mm(10)
- 62.992 mm(4)
- 63.0 mm(102)
- 63.5 mm(2)
- 63.51 mm(1)
- 64.5 mm(16)
- 65.0 mm(1)
- 67.0 mm(1)
- 67.5 mm(13)
- 67.68 mm(1)
- 68.0 mm(2)
- 69.5 mm(1)
- 69.85 mm(4)
- 70.0 mm(6)
- 72.0 mm(1)
- 73.0 mm(1)
- 74.0 mm(1)
- 75.0 mm(3)
- 76.2 mm(1)
- 79.0 mm(4)
- 80.0 mm(10)
- 80.01 mm(2)
- 81.0 mm(3)
- 81.28 mm(2)
- 82.0 mm(3)
- 82.55 mm(5)
- 83.06 mm(1)
- 83.3 mm(2)
- 85.0 mm(3)
- 86.0 mm(1)
- 88.0 mm(3)
- 88.9 mm(7)
- 89.0 mm(7)
- 89.66 mm(1)
- 90.0 mm(7)
- 91.0 mm(1)
- 91.44 mm(2)
- 92.0 mm(1)
- 95.0 mm(1)
- 95.25 mm(4)
- 96.0 mm(7)
- 96.1 mm(1)
- 97.0 mm(2)
- 97.943 mm(3)
- 100.0 mm(24)
- 101.0 mm(1)
- 101.6 mm(18)
- 102.36 mm(1)
- 105.0 mm(2)
- 107.0 mm(1)
- 108.71 mm(2)
- 109.22 mm(3)
- 110.0 mm(18)
- 110.5 mm(1)
- 111.0 mm(2)
- 113.0 mm(1)
- 114.3 mm(9)
- 115.0 mm(1)
- 115.06 mm(6)
- 115.062 mm(3)
- 117.0 mm(2)
- 119.13 mm(1)
- 120.0 mm(13)
- 121.9 mm(1)
- 121.92 mm(4)
- 125.0 mm(2)
- 127.761 mm(1)
- 130.0 mm(9)
- 131.0 mm(1)
- 132.0 mm(1)
- 132.08 mm(1)
- 132.1 mm(2)
- 132.9 mm(1)
- 133.0 mm(3)
- 133.4 mm(1)
- 134.109 mm(1)
- 134.112 mm(1)
- 135.0 mm(2)
- 138.0 mm(1)
- 139.7 mm(2)
- 140.0 mm(7)
- 140.462 mm(1)
- 140.97 mm(3)
- 142.0 mm(2)
- 145.0 mm(3)
- 146.05 mm(4)
- 146.1 mm(1)
- 150.0 mm(13)
- 152.4 mm(13)
- 152.41 mm(1)
- 153.162 mm(1)
- 155.0 mm(3)
- 156.21 mm(1)
- 159.512 mm(1)
- 160.0 mm(6)
- 170.0 mm(12)
- 170.18 mm(4)
- 170.2 mm(1)
- 177.8 mm(5)
- 180.0 mm(7)
- 183.0 mm(1)
- 187.0 mm(1)
- 190.0 mm(1)
- 190.5 mm(1)
- 195.0 mm(1)
- 195.21 mm(1)
- 200.0 mm(25)
- 203.2 mm(18)
- 205.0 mm(1)
- 207.0 mm(1)
- 210.0 mm(4)
- 217.0 mm(1)
- 220.0 mm(2)
- 228.6 mm(2)
- 232.0 mm(2)
- 234.95 mm(1)
- 248.9 mm(2)
- 248.92 mm(2)
- 250.0 mm(7)
- 254.0 mm(2)
- 257.0 mm(1)
- 262.0 mm(1)
- 300.0 mm(2)
Over All Length [L] Min값 입력받는 사람Over All Length [L] MaxOver All Length [L]
cornerConfiguration
≈
Corner Radius
Corner Radius
- 0.0 in(174)
- 0.008 in(129)
- 0.012 in(22)
- 0.016 in(455)
- 0.02 in(19)
- 0.025 in(5)
- 0.03 in(9)
- 0.031 in(810)
- 0.035 in(11)
- 0.038 in(49)
- 0.039 in(60)
- 0.043 in(16)
- 0.047 in(886)
- 0.048 in(47)
- 0.049 in(4)
- 0.05 in(40)
- 0.051 in(85)
- 0.059 in(24)
- 0.063 in(563)
- 0.065 in(7)
- 0.067 in(2)
- 0.075 in(16)
- 0.079 in(297)
- 0.08 in(5)
- 0.083 in(23)
- 0.093 in(13)
- 0.094 in(219)
- 0.098 in(48)
- 0.122 in(142)
- 0.125 in(62)
- 0.126 in(299)
- 0.138 in(20)
- 0.157 in(131)
- 0.161 in(23)
- 0.171 in(91)
- 0.187 in(7)
- 0.197 in(94)
- 0.205 in(22)
- 0.236 in(193)
- 0.25 in(8)
- 0.313 in(7)
- 0.315 in(92)
- 0.375 in(25)
- 0.394 in(11)
- 0.492 in(7)
- 0.5 in(6)
- 0.63 in(6)
- 1.969 in(1)
Corner Radius Min값 입력받는 사람Corner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 0.0 mm(174)
- 0.2 mm(129)
- 0.3 mm(22)
- 0.4 mm(455)
- 0.5 mm(19)
- 0.625 mm(5)
- 0.75 mm(9)
- 0.775 mm(122)
- 0.8 mm(801)
- 0.9 mm(11)
- 0.975 mm(49)
- 1.0 mm(60)
- 1.1 mm(16)
- 1.2 mm(886)
- 1.225 mm(47)
- 1.25 mm(4)
- 1.275 mm(40)
- 1.3 mm(85)
- 1.5 mm(24)
- 1.6 mm(563)
- 1.65 mm(7)
- 1.7 mm(2)
- 1.9 mm(16)
- 2.0 mm(297)
- 2.025 mm(5)
- 2.1 mm(23)
- 2.35 mm(13)
- 2.4 mm(219)
- 2.5 mm(48)
- 3.1 mm(142)
- 3.175 mm(62)
- 3.2 mm(299)
- 3.5 mm(20)
- 4.0 mm(131)
- 4.1 mm(23)
- 4.35 mm(91)
- 4.75 mm(7)
- 5.0 mm(94)
- 5.2 mm(22)
- 6.0 mm(193)
- 6.35 mm(8)
- 7.95 mm(7)
- 8.0 mm(92)
- 9.525 mm(25)
- 10.0 mm(11)
- 12.5 mm(7)
- 12.7 mm(6)
- 16.0 mm(6)
- 50.0 mm(1)
Corner Radius Min값 입력받는 사람Corner Radius MaxCorner Radius
=
Corner Chamfer
Corner Chamfer
- 0.0 mm(2120)
- 0.15 mm(25)
- 0.6 mm(10)
- 0.69 mm(18)
- 0.7 mm(1)
- 0.71 mm(2)
- 0.74 mm(4)
- 0.765 mm(15)
- 1.0 mm(17)
- 1.02 mm(18)
- 1.029 mm(17)
- 1.04 mm(1)
- 1.17 mm(3)
- 1.2 mm(13)
- 1.21 mm(3)
- 1.24 mm(3)
- 1.39 mm(8)
- 1.443 mm(4)
- 1.483 mm(20)
- 1.484 mm(19)
- 1.511 mm(18)
- 1.512 mm(3)
- 2.369 mm(24)
- 2.58 mm(1)
Corner Chamfer Min값 입력받는 사람Corner Chamfer MaxCorner Chamfer
=
Corner Chamfer
Corner Chamfer
- 0.0 in(2120)
- 0.0059 in(25)
- 0.0236 in(10)
- 0.027 in(18)
- 0.0276 in(1)
- 0.028 in(2)
- 0.0292 in(4)
- 0.0301 in(15)
- 0.039 in(17)
- 0.04 in(18)
- 0.0405 in(17)
- 0.0409 in(1)
- 0.0461 in(12)
- 0.0462 in(3)
- 0.0471 in(1)
- 0.0476 in(3)
- 0.0487 in(3)
- 0.0546 in(8)
- 0.0568 in(4)
- 0.0584 in(24)
- 0.0595 in(21)
- 0.0933 in(24)
- 0.1017 in(1)
Corner Chamfer Min값 입력받는 사람Corner Chamfer MaxCorner Chamfer
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (203)
- THM-F (20)
- THM-U (206)
- THR (49)
- THR-S (11)
- TN2505 (105)
- TN6405 (23)
- TN6425 (24)
- TN6430 (31)
- TN6501 (170)
- TN6502 (45)
- TN6510 (191)
- TN6520 (248)
- TN6525 (417)
- TN6540 (455)
- TTI25 (74)
- TTM (1)
- TTM08 (150)
- TTM09 (13)
- TTR (3)
- WBK40U (10)
- WDN00U (26)
- WDN10U (115)
- WK15CM (1031)
- WK15PM (408)
- WK20PM (214)
- WK25YM (91)
- WN10HM (224)
- WN25PM (467)
- WP20CM (17)
- WP25PM (909)
- WP35CM (1050)
- WP40PM (922)
- WS30PM (482)
- WS40PM (889)
- WU10PM (238)
- WU20PM (424)
- WU35PM (485)
Hand Of Tool
Hand Of Tool
- N (52)
- R (1126)
Rough Finish
Rough Finish
- FR (7)
- R (1)
Wiper Insert
Wiper Insert
- N (975)
- Y (84)
=
Maximum Ramp Angle
Maximum Ramp Angle
- 0.16 (3)
- 0.17 (2)
- 0.2 (1)
- 0.21 (1)
- 0.24 (2)
- 0.25 (1)
- 0.26 (3)
- 0.3 (2)
- 0.31 (4)
- 0.32 (7)
- 0.33 (1)
- 0.35 (1)
- 0.37 (3)
- 0.38 (4)
- 0.39 (3)
- 0.4 (4)
- 0.41 (2)
- 0.42 (4)
- 0.45 (3)
- 0.47 (1)
- 0.48 (1)
- 0.49 (14)
- 0.5 (9)
- 0.51 (1)
- 0.52 (1)
- 0.54 (1)
- 0.55 (1)
- 0.58 (1)
- 0.6 (14)
- 0.62 (1)
- 0.65 (1)
- 0.66 (1)
- 0.7 (12)
- 0.8 (5)
- 0.81 (1)
- 0.83 (3)
- 0.84 (2)
- 0.86 (1)
- 0.88 (2)
- 0.9 (8)
- 0.95 (1)
- 1.0 (7)
- 1.01 (1)
- 1.09 (2)
- 1.1 (3)
- 1.2 (4)
- 1.25 (1)
- 1.3 (9)
- 1.33 (1)
- 1.36 (2)
- 1.4 (2)
- 1.41 (6)
- 1.46 (2)
- 1.5 (16)
- 1.6 (3)
- 1.7 (3)
- 1.73 (1)
- 1.75 (1)
- 1.8 (8)
- 1.9 (9)
- 2.0 (4)
- 2.05 (3)
- 2.09 (5)
- 2.1 (8)
- 2.2 (5)
- 2.25 (1)
- 2.4 (3)
- 2.5 (7)
- 2.6 (6)
- 2.69 (2)
- 2.7 (3)
- 2.75 (2)
- 2.8 (10)
- 3.0 (10)
- 3.2 (5)
- 3.4 (2)
- 3.5 (3)
- 3.6 (15)
- 3.7 (4)
- 3.75 (2)
- 4.0 (9)
- 4.2 (1)
- 4.3 (9)
- 4.34 (1)
- 4.4 (2)
- 4.5 (5)
- 4.6 (1)
- 4.75 (1)
- 5.0 (1)
- 5.1 (9)
- 5.2 (1)
- 5.3 (8)
- 5.4 (1)
- 5.5 (1)
- 5.7 (6)
- 5.75 (1)
- 5.8 (8)
- 5.9 (3)
- 6.0 (2)
- 6.1 (1)
- 6.4 (2)
- 6.5 (1)
- 6.6 (1)
- 6.74 (2)
- 6.75 (1)
- 7.0 (1)
- 7.2 (1)
- 7.5 (3)
- 7.6 (2)
- 7.7 (1)
- 7.75 (2)
- 7.8 (11)
- 7.9 (1)
- 8.0 (3)
- 8.1 (1)
- 8.2 (2)
- 8.25 (1)
- 8.5 (6)
- 8.6 (7)
- 8.75 (1)
- 8.8 (4)
- 9.0 (6)
- 9.3 (1)
- 9.7 (1)
- 10.0 (8)
- 10.25 (2)
- 10.5 (1)
- 10.75 (1)
- 11.0 (1)
- 11.4 (3)
- 11.5 (2)
- 12.0 (5)
- 12.5 (3)
- 13.5 (1)
- 14.25 (1)
- 14.5 (1)
- 14.7 (2)
- 15.75 (1)
- 18.0 (4)
- 20.0 (6)
- 22.0 (5)
- 23.0 (1)
- 40.0 (1)
- 50.0 (1)
Maximum Ramp Angle Min값 입력받는 사람Maximum Ramp Angle MaxMaximum Ramp Angle
frontEnd
Adapter Front-End
Adapter Front-End
- SCREW-ON ADAPTER (37)
Clamp Style
Clamp Style
- C (5)
- S (18)
=
Cutting Width
Cutting Width
- 0.0758 in(1)
- 0.0878 in(1)
- 0.1073 in(3)
- 0.128 in(3)
- 0.1575 in(2)
- 0.1675 in(2)
- 0.236 in(2)
- 0.2756 in(1)
- 0.276 in(2)
- 0.315 in(4)
- 0.375 in(1)
- 0.3937 in(6)
- 0.394 in(4)
- 0.431 in(1)
- 0.4724 in(16)
- 0.473 in(2)
- 0.5 in(2)
- 0.545 in(1)
- 0.5512 in(8)
- 0.625 in(1)
- 0.6299 in(12)
- 0.63 in(6)
- 0.689 in(6)
- 0.703 in(1)
- 0.75 in(3)
- 0.7873 in(1)
- 0.7874 in(11)
- 0.86 in(1)
- 0.9843 in(3)
- 1.0 in(2)
- 1.2598 in(3)
Cutting Width Min값 입력받는 사람Cutting Width MaxCutting Width
=
Cutting Width
Cutting Width
- 1.925 mm(1)
- 2.23 mm(1)
- 2.725 mm(3)
- 3.255 mm(3)
- 4.0 mm(2)
- 4.255 mm(2)
- 6.0 mm(2)
- 7.0 mm(3)
- 8.0 mm(4)
- 9.525 mm(1)
- 10.0 mm(10)
- 10.95 mm(1)
- 12.0 mm(18)
- 12.7 mm(2)
- 13.85 mm(1)
- 14.0 mm(8)
- 15.875 mm(1)
- 16.0 mm(18)
- 17.5 mm(6)
- 17.85 mm(1)
- 19.05 mm(3)
- 20.0 mm(12)
- 21.85 mm(1)
- 25.0 mm(3)
- 25.4 mm(2)
- 32.0 mm(3)
Cutting Width Min값 입력받는 사람Cutting Width MaxCutting Width
Front End Type
Front End Type
- ZYL - Cylindrical Adapter (37)
Insert Shape
Insert Shape
- A-PARALLELOGRAM 85 (15)
- A-PARALLELOGRAM 90 (12)
- C-DIAMOND/RHOMBIC 80 (21)
- DMB-BALL NOSE (64)
- DMT-TOROIDAL (28)
- H-HEXAGON 120 (327)
- L-RECTANGLE 90 (3)
- L-RECTANGLE ON EDGE 90 (11)
- M-DIAMOND/RHOMBIC 86 (49)
- O-OCTOGON 135 (31)
- ON EDGE MISC (10)
- R-ROUND (304)
- S-SQUARE 90 (422)
- S-SQUARE ON EDGE 90 (25)
- T-TRIANGLE 60 (49)
- X-DOV-LOK 90 (26)
- X-PARALLELOGRAM 75 (342)
- X-PARALLELOGRAM 80 (201)
- X-RECTANGLE MILL 4 90 (280)
- X-RH0MBIC 70 (14)
- X-RHOMBIC 83 (9)
- X-TRIGON WO_J 101.5 (77)
- X-TRIGON WO_J 80 (45)
- Z-PARALLELOGRAM 89.27 (30)
Cartridge Size
Cartridge Size
- 15 - mm of Shank Height M400 (23)
Front End Style
Front End Style
- ZYL03 Attachment Thread (37)
=
Maximum Cutting Depth
Maximum Cutting Depth
- 0.2451 in(1)
- 0.332 in(1)
- 0.411 in(1)
- 0.4885 in(1)
- 0.9055 in(2)
- 0.9843 in(4)
- 1.1811 in(6)
- 1.2795 in(4)
- 1.6535 in(6)
- 1.7717 in(4)
- 1.88 in(5)
- 1.89 in(5)
- 2.0866 in(6)
- 2.4803 in(2)
- 3.3858 in(6)
- 9.055 in(2)
Maximum Cutting Depth Min값 입력받는 사람Maximum Cutting Depth MaxMaximum Cutting Depth
=
Maximum Cutting Depth
Maximum Cutting Depth
- 6.175 mm(1)
- 8.4365 mm(1)
- 10.4375 mm(1)
- 12.4025 mm(1)
- 23.0 mm(4)
- 25.0 mm(4)
- 30.0 mm(6)
- 32.5 mm(4)
- 42.0 mm(6)
- 45.0 mm(4)
- 48.0 mm(10)
- 53.0 mm(6)
- 63.0 mm(2)
- 86.0 mm(6)
Maximum Cutting Depth Min값 입력받는 사람Maximum Cutting Depth MaxMaximum Cutting Depth
Gage Length
Gage Length
- 85.0000 in(1)
- 88.0000 in(1)
- 90.0000 in(2)
- 105.0000 in(1)
- 108.0000 in(1)
- 110.0000 in(3)
- 125.0000 in(1)
- 128.0000 in(1)
- 130.0000 in(2)
- 131.0000 in(2)
- 148.0000 in(1)
- 150.0000 in(1)
- 156.0000 in(2)
- 160.0000 in(2)
- 168.0000 in(1)
- 170.0000 in(3)
- 181.0000 in(2)
- 206.0000 in(2)
- 210.0000 in(2)
- 231.0000 in(2)
- 260.0000 in(2)
- 310.0000 in(2)
Gage Length
Gage Length
- 85.0000 mm(1)
- 88.0000 mm(1)
- 90.0000 mm(2)
- 105.0000 mm(1)
- 108.0000 mm(1)
- 110.0000 mm(3)
- 125.0000 mm(1)
- 128.0000 mm(1)
- 130.0000 mm(2)
- 131.0000 mm(2)
- 148.0000 mm(1)
- 150.0000 mm(1)
- 156.0000 mm(2)
- 160.0000 mm(2)
- 168.0000 mm(1)
- 170.0000 mm(3)
- 181.0000 mm(2)
- 206.0000 mm(2)
- 210.0000 mm(2)
- 231.0000 mm(2)
- 260.0000 mm(2)
- 310.0000 mm(2)
=
Front End Size
Front End Size
- 13.005 in(3)
- 18.009 in(3)
- 21.0 in(5)
- 21.006 in(5)
- 28.981 in(2)
- 29.0 in(6)
Front End Size Min값 입력받는 사람Front End Size MaxFront End Size
=
Front End Size
Front End Size
- 13.005 mm(3)
- 18.009 mm(3)
- 21.0 mm(5)
- 21.006 mm(5)
- 28.981 mm(2)
- 29.0 mm(6)
Front End Size Min값 입력받는 사람Front End Size MaxFront End Size
=
Neck Diameter
Neck Diameter
- 0.3346 in(1)
- 0.345 in(4)
- 0.371 in(2)
- 0.392 in(1)
- 0.4134 in(1)
- 0.417 in(3)
- 0.4173 in(1)
- 0.418 in(2)
- 0.467 in(1)
- 0.4921 in(1)
- 0.4941 in(1)
- 0.509 in(1)
- 0.5112 in(1)
- 0.5315 in(1)
- 0.539 in(2)
- 0.5436 in(1)
- 0.544 in(4)
- 0.559 in(4)
- 0.5591 in(1)
- 0.576 in(1)
- 0.591 in(1)
- 0.61 in(3)
- 0.6102 in(1)
- 0.635 in(1)
- 0.6516 in(1)
- 0.6693 in(1)
- 0.67 in(6)
- 0.689 in(1)
- 0.706 in(3)
- 0.7067 in(1)
- 0.707 in(1)
- 0.7088 in(1)
- 0.709 in(6)
- 0.722 in(1)
- 0.728 in(5)
- 0.74 in(1)
- 0.748 in(1)
- 0.7598 in(4)
- 0.768 in(3)
- 0.785 in(1)
- 0.807 in(1)
- 0.827 in(4)
- 0.842 in(3)
- 0.8425 in(5)
- 0.843 in(3)
- 0.8504 in(1)
- 0.866 in(5)
- 0.8858 in(2)
- 0.8956 in(1)
- 0.896 in(4)
- 0.9055 in(1)
- 0.906 in(1)
- 0.912 in(6)
- 0.929 in(1)
- 0.9567 in(2)
- 0.957 in(2)
- 0.965 in(10)
- 0.976 in(2)
- 0.9764 in(1)
- 0.98 in(3)
- 0.984 in(1)
- 0.9843 in(1)
- 0.987 in(1)
- 1.006 in(3)
- 1.0591 in(1)
- 1.063 in(1)
- 1.084 in(1)
- 1.092 in(2)
- 1.093 in(4)
- 1.102 in(5)
- 1.1181 in(4)
- 1.1368 in(1)
- 1.1417 in(1)
- 1.142 in(3)
- 1.149 in(4)
- 1.1516 in(1)
- 1.1596 in(1)
- 1.16 in(7)
- 1.1614 in(1)
- 1.1796 in(1)
- 1.181 in(1)
- 1.1914 in(1)
- 1.196 in(1)
- 1.22 in(3)
- 1.228 in(2)
- 1.24 in(3)
- 1.252 in(1)
- 1.2559 in(2)
- 1.256 in(2)
- 1.3031 in(1)
- 1.324 in(1)
- 1.343 in(6)
- 1.375 in(1)
- 1.417 in(5)
- 1.4303 in(1)
- 1.8701 in(1)
Neck Diameter Min값 입력받는 사람Neck Diameter MaxNeck Diameter
=
Neck Diameter
Neck Diameter
- 8.5 mm(1)
- 8.763 mm(1)
- 8.77 mm(3)
- 9.42 mm(2)
- 9.95 mm(1)
- 10.5 mm(1)
- 10.592 mm(1)
- 10.6 mm(3)
- 10.61 mm(2)
- 11.85 mm(1)
- 12.5 mm(1)
- 12.55 mm(1)
- 12.92 mm(1)
- 12.985 mm(1)
- 13.5 mm(1)
- 13.7 mm(2)
- 13.807 mm(1)
- 13.81 mm(4)
- 14.199 mm(1)
- 14.2 mm(4)
- 14.64 mm(1)
- 15.0 mm(1)
- 15.5 mm(4)
- 16.14 mm(1)
- 16.55 mm(1)
- 17.0 mm(1)
- 17.002 mm(1)
- 17.02 mm(5)
- 17.5 mm(1)
- 17.78 mm(1)
- 17.92 mm(3)
- 17.95 mm(1)
- 18.0 mm(6)
- 18.004 mm(1)
- 18.35 mm(1)
- 18.5 mm(5)
- 18.8 mm(1)
- 19.0 mm(1)
- 19.3 mm(4)
- 19.5 mm(3)
- 19.95 mm(1)
- 20.5 mm(1)
- 21.0 mm(4)
- 21.391 mm(3)
- 21.4 mm(8)
- 21.6 mm(1)
- 22.0 mm(3)
- 22.5 mm(2)
- 22.749 mm(1)
- 22.75 mm(6)
- 23.0 mm(2)
- 23.16 mm(6)
- 23.59 mm(1)
- 24.3 mm(4)
- 24.5 mm(10)
- 24.8 mm(3)
- 24.9 mm(3)
- 25.0 mm(2)
- 25.07 mm(1)
- 25.55 mm(3)
- 26.9 mm(1)
- 27.0 mm(1)
- 27.52 mm(1)
- 27.74 mm(1)
- 27.741 mm(1)
- 27.75 mm(4)
- 28.0 mm(5)
- 28.4 mm(4)
- 28.874 mm(1)
- 29.0 mm(4)
- 29.2 mm(4)
- 29.25 mm(1)
- 29.45 mm(7)
- 29.454 mm(1)
- 29.5 mm(1)
- 29.961 mm(1)
- 29.998 mm(1)
- 30.261 mm(1)
- 30.373 mm(1)
- 31.0 mm(3)
- 31.2 mm(2)
- 31.5 mm(3)
- 31.8 mm(1)
- 31.9 mm(4)
- 33.1 mm(1)
- 33.621 mm(1)
- 34.1 mm(6)
- 34.92 mm(1)
- 36.0 mm(5)
- 36.33 mm(1)
- 47.5 mm(1)
Neck Diameter Min값 입력받는 사람Neck Diameter MaxNeck Diameter
insertGeometry
Shape
Shape
- A-PARALLELOGRAM 85 (9)
- A-PARALLELOGRAM 90 (12)
- C-DIAMOND/RHOMBIC 80 (17)
- DMB-BALL NOSE (33)
- DMT-TOROIDAL (13)
- H-HEXAGON 120 (140)
- L-RECTANGLE 90 (3)
- L-RECTANGLE ON EDGE 90 (2)
- M-DIAMOND/RHOMBIC 86 (11)
- O-OCTOGON 135 (12)
- ON EDGE MISC (7)
- R-ROUND (125)
- S-SQUARE 90 (188)
- S-SQUARE ON EDGE 90 (13)
- T-TRIANGLE 60 (34)
- X-DOV-LOK 90 (6)
- X-PARALLELOGRAM 75 (173)
- X-PARALLELOGRAM 80 (123)
- X-RECTANGLE MILL 4 90 (95)
- X-RH0MBIC 70 (4)
- X-RHOMBIC 83 (2)
- X-TRIGON WO_J 101.5 (17)
- X-TRIGON WO_J 80 (10)
- Z-PARALLELOGRAM 89.27 (9)
=
Insert IC Size
Insert IC Size
- 6.35 mm(9)
- 6.995 mm(3)
- 7.0 mm(2)
- 7.304 mm(4)
- 7.794 mm(12)
- 7.938 mm(5)
- 8.0 mm(3)
- 9.52 mm(15)
- 9.525 mm(26)
- 10.0 mm(38)
- 10.9 mm(5)
- 10.973 mm(6)
- 10.975 mm(8)
- 11.0 mm(5)
- 11.002 mm(2)
- 11.138 mm(6)
- 12.0 mm(84)
- 12.7 mm(192)
- 13.0 mm(1)
- 13.41 mm(2)
- 15.875 mm(50)
- 15.88 mm(50)
- 16.0 mm(32)
- 16.88 mm(9)
- 19.05 mm(13)
Insert IC Size Min값 입력받는 사람Insert IC Size MaxInsert IC Size
=
Insert IC Size
Insert IC Size
- 0.25 in(9)
- 0.2754 in(3)
- 0.2756 in(2)
- 0.2875 in(2)
- 0.288 in(2)
- 0.3068 in(6)
- 0.3069 in(6)
- 0.3125 in(5)
- 0.315 in(3)
- 0.3748 in(4)
- 0.375 in(37)
- 0.3937 in(38)
- 0.4291 in(5)
- 0.432 in(6)
- 0.4321 in(8)
- 0.4331 in(5)
- 0.4332 in(2)
- 0.4385 in(6)
- 0.472 in(30)
- 0.4724 in(54)
- 0.5 in(188)
- 0.501 in(4)
- 0.5118 in(1)
- 0.528 in(2)
- 0.625 in(100)
- 0.6299 in(29)
- 0.63 in(3)
- 0.6646 in(9)
- 0.75 in(13)
Insert IC Size Min값 입력받는 사람Insert IC Size MaxInsert IC Size
=
Cutting Edge Length
Cutting Edge Length
- 4.1 mm(3)
- 6.0 mm(1)
- 6.3 mm(12)
- 6.448 mm(4)
- 6.782 mm(8)
- 6.8 mm(17)
- 6.835 mm(14)
- 6.837 mm(4)
- 6.874 mm(9)
- 7.0 mm(15)
- 7.304 mm(4)
- 8.06 mm(5)
- 8.495 mm(10)
- 8.582 mm(18)
- 8.593 mm(27)
- 8.721 mm(1)
- 8.875 mm(1)
- 8.956 mm(1)
- 9.003 mm(1)
- 9.17 mm(1)
- 9.176 mm(1)
- 9.46 mm(1)
- 9.47 mm(4)
- 9.482 mm(1)
- 9.525 mm(7)
- 9.548 mm(6)
- 9.563 mm(8)
- 9.672 mm(4)
- 9.88 mm(2)
- 10.0 mm(3)
- 10.37 mm(4)
- 10.44 mm(5)
- 10.75 mm(5)
- 10.8 mm(10)
- 10.804 mm(5)
- 10.805 mm(3)
- 10.831 mm(4)
- 10.832 mm(12)
- 10.962 mm(2)
- 11.0 mm(20)
- 11.102 mm(2)
- 11.2 mm(1)
- 11.44 mm(3)
- 11.47 mm(6)
- 11.68 mm(3)
- 11.72 mm(10)
- 11.73 mm(30)
- 11.74 mm(14)
- 11.75 mm(22)
- 11.756 mm(4)
- 12.0 mm(22)
- 12.7 mm(118)
- 12.731 mm(5)
- 12.8 mm(1)
- 12.896 mm(4)
- 13.41 mm(2)
- 15.0 mm(2)
- 15.3 mm(60)
- 15.64 mm(3)
- 15.67 mm(61)
- 15.672 mm(1)
- 15.772 mm(3)
- 15.875 mm(27)
- 15.88 mm(14)
- 16.0 mm(2)
- 16.297 mm(3)
- 16.3 mm(3)
- 16.37 mm(1)
- 16.38 mm(1)
- 16.4 mm(7)
- 16.453 mm(8)
- 16.498 mm(5)
- 16.5 mm(1)
- 16.55 mm(4)
- 16.553 mm(3)
- 16.7 mm(2)
- 16.703 mm(3)
- 16.706 mm(6)
- 16.709 mm(2)
- 16.71 mm(40)
- 16.72 mm(10)
- 16.866 mm(2)
- 17.0 mm(10)
- 17.196 mm(3)
- 17.22 mm(1)
- 17.24 mm(1)
- 20.0 mm(2)
- 21.948 mm(2)
- 21.949 mm(6)
- 21.961 mm(7)
- 21.997 mm(1)
- 22.489 mm(1)
Cutting Edge Length Min값 입력받는 사람Cutting Edge Length MaxCutting Edge Length
=
Cutting Edge Length
Cutting Edge Length
- 0.0617 in(4)
- 0.1616 in(3)
- 0.2362 in(1)
- 0.246 in(12)
- 0.2539 in(4)
- 0.267 in(8)
- 0.269 in(17)
- 0.2691 in(14)
- 0.2692 in(4)
- 0.2706 in(9)
- 0.276 in(15)
- 0.2875 in(2)
- 0.288 in(2)
- 0.3173 in(5)
- 0.334 in(6)
- 0.3345 in(4)
- 0.3379 in(18)
- 0.3383 in(27)
- 0.3494 in(1)
- 0.3526 in(1)
- 0.3545 in(1)
- 0.361 in(1)
- 0.3613 in(1)
- 0.3724 in(1)
- 0.3728 in(4)
- 0.3733 in(1)
- 0.375 in(7)
- 0.3759 in(6)
- 0.3765 in(8)
- 0.3808 in(4)
- 0.389 in(2)
- 0.3937 in(3)
- 0.4083 in(4)
- 0.411 in(2)
- 0.4111 in(3)
- 0.4233 in(5)
- 0.4252 in(10)
- 0.4254 in(8)
- 0.4264 in(4)
- 0.4265 in(12)
- 0.4316 in(2)
- 0.433 in(16)
- 0.4331 in(4)
- 0.437 in(1)
- 0.4371 in(1)
- 0.441 in(1)
- 0.45 in(3)
- 0.452 in(6)
- 0.46 in(3)
- 0.461 in(2)
- 0.462 in(58)
- 0.4626 in(9)
- 0.4628 in(4)
- 0.463 in(7)
- 0.4724 in(22)
- 0.5 in(118)
- 0.5012 in(5)
- 0.5039 in(1)
- 0.5077 in(4)
- 0.528 in(2)
- 0.5906 in(2)
- 0.602 in(60)
- 0.616 in(3)
- 0.6169 in(57)
- 0.617 in(1)
- 0.6209 in(3)
- 0.625 in(39)
- 0.6252 in(2)
- 0.6299 in(2)
- 0.6416 in(3)
- 0.642 in(3)
- 0.645 in(2)
- 0.646 in(7)
- 0.6477 in(2)
- 0.6478 in(6)
- 0.6495 in(5)
- 0.65 in(1)
- 0.6517 in(3)
- 0.652 in(4)
- 0.6576 in(3)
- 0.6577 in(6)
- 0.6578 in(2)
- 0.658 in(52)
- 0.664 in(2)
- 0.6689 in(1)
- 0.669 in(9)
- 0.677 in(3)
- 0.678 in(1)
- 0.679 in(1)
- 0.7874 in(2)
- 0.8641 in(8)
- 0.8646 in(7)
- 0.866 in(1)
- 0.8854 in(1)
Cutting Edge Length Min값 입력받는 사람Cutting Edge Length MaxCutting Edge Length
Chip Breaker CBMD
Chip Breaker CBMD
- 11 (3)
- 20 (2)
- 21 (4)
- 31 (16)
- 43 (2)
- AL (15)
- ALP (49)
- CA (1)
- GD (55)
- GE (13)
- HD (36)
- LD (37)
- M0 (2)
- M0T (1)
- MH (132)
- ML (109)
- MM (259)
- MMX (4)
- MR (6)
- MS (26)
- MU (6)
- X (11)
Cutting Tool Material
Cutting Tool Material
- B H (1)
- C N (3)
- D P (9)
- H T (12)
- H W (1057)
Tolerance Class
Tolerance Class
- A (25)
- C (76)
- D (8)
- E (44)
- G (167)
- H (128)
- K (74)
- M (149)
- N (37)
- P (292)
backEnd
Connection Type
Connection Type
- ARBOR (41)
- CYLINDRICAL (371)
- SCREW-ON (96)
- SHELL MILL (654)
- STUB TAPER (6)
- TAPER SHANK (10)
System Size
System Size
- DV50 (6)
- HSK63A (4)
=
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(3)
- 12.0 mm(16)
- 12.7 mm(19)
- 12.8 mm(1)
- 13.0 mm(10)
- 15.87 mm(3)
- 15.875 mm(13)
- 16.0 mm(64)
- 17.0 mm(1)
- 18.0 mm(9)
- 19.0 mm(7)
- 19.04 mm(1)
- 19.05 mm(91)
- 19.06 mm(5)
- 19.069 mm(1)
- 19.1 mm(11)
- 20.0 mm(44)
- 21.0 mm(17)
- 22.0 mm(132)
- 22.01 mm(3)
- 22.013 mm(1)
- 24.37 mm(1)
- 25.0 mm(79)
- 25.4 mm(116)
- 25.41 mm(1)
- 27.0 mm(76)
- 27.5 mm(1)
- 28.0 mm(6)
- 29.0 mm(47)
- 31.7 mm(11)
- 31.74 mm(2)
- 31.75 mm(40)
- 31.76 mm(2)
- 31.8 mm(2)
- 32.0 mm(116)
- 32.012 mm(1)
- 38.09 mm(2)
- 38.1 mm(57)
- 38.11 mm(3)
- 38.12 mm(2)
- 40.0 mm(90)
- 40.012 mm(3)
- 50.0 mm(10)
- 50.8 mm(20)
- 60.0 mm(38)
- 60.013 mm(1)
- 62.94 mm(1)
- 63.0 mm(3)
- 63.5 mm(19)
- 69.85 mm(6)
Back-End Diameter Min값 입력받는 사람Back-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.375 in(1)
- 0.3937 in(3)
- 0.47 in(1)
- 0.4724 in(15)
- 0.5 in(19)
- 0.5039 in(1)
- 0.5118 in(8)
- 0.512 in(2)
- 0.625 in(16)
- 0.6299 in(35)
- 0.63 in(27)
- 0.6303 in(4)
- 0.6693 in(1)
- 0.7087 in(6)
- 0.709 in(1)
- 0.71 in(2)
- 0.75 in(117)
- 0.787 in(9)
- 0.7874 in(26)
- 0.79 in(9)
- 0.8268 in(9)
- 0.827 in(8)
- 0.866 in(25)
- 0.8661 in(78)
- 0.8666 in(10)
- 0.8667 in(1)
- 0.867 in(15)
- 0.87 in(7)
- 0.9594 in(1)
- 0.98 in(8)
- 0.984 in(24)
- 0.9843 in(47)
- 1.0 in(117)
- 1.06 in(3)
- 1.063 in(64)
- 1.064 in(7)
- 1.0827 in(1)
- 1.096 in(1)
- 1.1024 in(6)
- 1.14 in(1)
- 1.1417 in(21)
- 1.142 in(25)
- 1.25 in(57)
- 1.2595 in(1)
- 1.2598 in(65)
- 1.26 in(49)
- 1.2603 in(1)
- 1.5 in(64)
- 1.574 in(1)
- 1.5748 in(64)
- 1.575 in(17)
- 1.5753 in(3)
- 1.58 in(7)
- 1.9685 in(9)
- 1.969 in(1)
- 2.0 in(20)
- 2.36 in(10)
- 2.3622 in(28)
- 2.3627 in(1)
- 2.478 in(1)
- 2.4803 in(3)
- 2.5 in(19)
- 2.75 in(6)
Back-End Diameter Min값 입력받는 사람Back-End Diameter MaxBack-End Diameter
No filters matching ""
