환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

    eBore™

    필터 선택
    필터
    필터
      필터 보기 위치
      Metric
      Inch
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (44)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
      • M Stainless Steel (44)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
      • K Cast Iron (39)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(39)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(39)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(39)
      • N Non-Ferrous Materials (39)
        • N1
          Wrought Aluminum (39)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(39)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(39)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (39)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (39)
        • N6
          Carbon, Graphite Composites, CFRP (39)
        • N7
          MMC's (39)
      • S High-Temp Alloys (44)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
      • H Hardened Materials (39)
        • H1
          Hardened Materials 44-48 HRC(39)
        • H2
          Hardened Materials 48-55 HRC(39)
        • H3
          Hardened Materials 56-60 HRC(39)
        • H4
          Hardened Materials >60 HRC(39)
      • C CFRP Materials (39)
        • C1
          CFRP, CFRP / CFRP (39)
        • C2
          CFRP / Aluminium CFRP / Non-Ferrous (39)
      Applications
      Applications
      • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (71)
      • Blind Hole FinishingBlind Hole Finishing (71)
      • Through & Cross Hole FinishingThrough & Cross Hole Finishing (71)
      • Through Hole FinishingThrough Hole Finishing (71)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (39)
      • Lightly Interrupted Cut (44)
      • Smooth Cut (44)
      • Varying Depth of Cut (44)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (12)
      • 91.0 (8)
      • 92.0 (23)
      Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • E-BORE Boring Bar (21)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (17)
      • 2.0 (17)
      • 3.0 (5)
      • 4.0 (17)
      Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 0.36 in(1)
      • 0.395 in(1)
      • 0.496 in(3)
      • 0.574 in(1)
      • 0.576 in(1)
      • 0.592 in(1)
      • 0.65 in(2)
      • 0.669 in(3)
      • 0.811 in(1)
      • 0.816 in(2)
      • 1.0 in(1)
      • 1.205 in(1)
      • 1.209 in(3)
      • 1.772 in(1)
      • 1.891 in(1)
      • 2.086 in(1)
      • 2.087 in(1)
      • 2.165 in(1)
      • 2.265 in(1)
      • 2.282 in(2)
      • 2.479 in(1)
      • 2.676 in(1)
      • 2.677 in(1)
      • 2.873 in(1)
      • 3.071 in(1)
      • 3.269 in(1)
      • 3.661 in(2)
      • 3.858 in(2)
      • 4.449 in(2)
      • 4.843 in(1)
      • 5.63 in(1)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 9.15 mm(1)
      • 10.025 mm(1)
      • 12.601 mm(3)
      • 14.55 mm(1)
      • 14.601 mm(1)
      • 15.025 mm(1)
      • 16.5 mm(2)
      • 17.0 mm(3)
      • 20.6 mm(1)
      • 20.701 mm(2)
      • 25.401 mm(1)
      • 30.6 mm(1)
      • 30.701 mm(3)
      • 45.0 mm(1)
      • 48.0 mm(1)
      • 52.975 mm(1)
      • 53.0 mm(1)
      • 55.0 mm(1)
      • 57.5 mm(1)
      • 57.975 mm(2)
      • 62.975 mm(1)
      • 67.976 mm(1)
      • 68.0 mm(1)
      • 72.976 mm(1)
      • 78.0 mm(1)
      • 83.0 mm(1)
      • 93.0 mm(2)
      • 98.0 mm(2)
      • 113.0 mm(2)
      • 123.0 mm(1)
      • 143.0 mm(1)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.0 in(3)
      • 0.001 in(32)
      • 0.002 in(32)
      • 0.004 in(44)
      • 0.008 in(39)
      • 0.016 in(39)
      • 0.031 in(39)
      • 0.047 in(10)
      • 0.063 in(3)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(3)
      • 0.025 mm(32)
      • 0.05 mm(32)
      • 0.1 mm(44)
      • 0.2 mm(39)
      • 0.4 mm(39)
      • 0.8 mm(39)
      • 1.201 mm(10)
      • 1.6 mm(3)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(23)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(23)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • HCK10 (39)
      • HK1500 (32)
      • HK35 (36)
      • HT2 (39)
      • HTX (39)
      • HWK15 (39)
      • K10M (36)
      • K10P (36)
      • K10U (32)
      • K15U (32)
      • K20K (36)
      • K25M (29)
      • K313 (39)
      • K68 (39)
      • KB1345 (10)
      • KB1610 (32)
      • KB1630 (39)
      • KB5610 (32)
      • KB5625 (32)
      • KB5630 (32)
      • KB9610 (32)
      • KBH10 (32)
      • KBH20 (39)
      • KC5010 (39)
      • KC5025 (39)
      • KC5410 (39)
      • KC720 (39)
      • KC730 (39)
      • KC732 (39)
      • KC8050 (39)
      • KC810 (39)
      • KC850 (39)
      • KC9010 (32)
      • KC9025 (39)
      • KC910 (39)
      • KC9105 (39)
      • KC9110 (39)
      • KC9120 (32)
      • KC9125 (39)
      • KC9225 (39)
      • KC9240 (39)
      • KC9240NEW (39)
      • KC9315 (39)
      • KC9320 (39)
      • KC9325 (39)
      • KC935 (39)
      • KC950 (32)
      • KC990 (32)
      • KCD25 (39)
      • KCK05 (39)
      • KCK05B (32)
      • KCK15 (39)
      • KCK15B (39)
      • KCK20 (39)
      • KCK20B (39)
      • KCM15 (39)
      • KCM15B (39)
      • KCM25 (39)
      • KCM25B (39)
      • KCM25S (32)
      • KCM35 (39)
      • KCM35B (3)
      • KCP05 (39)
      • KCP05B (3)
      • KCP10 (39)
      • KCP10B (39)
      • KCP20S (32)
      • KCP25 (39)
      • KCP25B (39)
      • KCP25C (39)
      • KCP30 (39)
      • KCP30B (10)
      • KCS10 (39)
      • KCS10B (39)
      • KCS25S (32)
      • KCU10 (43)
      • KCU10B (39)
      • KCU25 (39)
      • KCU25B (39)
      • KD050 (32)
      • KD081 (32)
      • KD1400 (32)
      • KD1425 (32)
      • KN10S (32)
      • KT175 (32)
      • KT315 (39)
      • KT325 (39)
      • KTP10 (32)
      • KTP25S (32)
      • KU10 (32)
      • KU10T (39)
      • KU30T (39)
      • NL300 (7)
      • NL920 (7)
      • PB100 (29)
      • PB170 (36)
      • PB250 (36)
      • PB300 (29)
      • PD100 (39)
      • PD50 (36)
      • SP0PW3 (7)
      • SP4019 (7)
      • SPN3W1 (3)
      • THM (39)
      • THM-X (39)
      • TN1000 (29)
      • TN10P (39)
      • TN10U (39)
      • TN15M (39)
      • TN15U (32)
      • TN2000 (39)
      • TN20K (39)
      • TN20P (39)
      • TN30M (39)
      • TN4000 (32)
      • TN5015 (39)
      • TN5020 (39)
      • TN5105 (39)
      • TN5120 (39)
      • TN6010 (10)
      • TN6025 (3)
      • TN7005 (3)
      • TN7010 (39)
      • TN7015 (39)
      • TN7025 (39)
      • TN7035 (39)
      • TN7105 (39)
      • TN7110 (39)
      • TN7115 (39)
      • TN7125 (39)
      • TN7135 (39)
      • TN8025 (39)
      • TTI15 (32)
      • TTM (3)
      • TTR (39)
      • TTS (32)
      • TTX (3)
      • W00342 (7)
      • WBH10C (32)
      • WBH10P (32)
      • WBH10U (32)
      • WBH20P (10)
      • WBH25P (32)
      • WBH30P (3)
      • WBK45U (10)
      • WDN00U (32)
      • WDN25U (32)
      • WK05CT (39)
      • WK15CT (39)
      • WK20CT (39)
      • WM15CT (39)
      • WM25CT (39)
      • WP15CT (39)
      • WP20TT (29)
      • WP25CT (39)
      • WP35CT (10)
      • WS10PT (39)
      • WS25PT (32)
      • WU05PT (39)
      • WU10HT (39)
      • WU10PR (5)
      • WU10PT (39)
      • WU20HT (29)
      • WU25PT (39)
      Hand Of Tool
      Hand Of Tool
      • R (21)
      Wiper Insert
      Wiper Insert
      • N (22)
      F Dimension
      F Dimension
      • 0.151 mm(1)
      • 2.825 mm(2)
      • 3.825 mm(1)
      • 4.75 mm(1)
      • 4.775 mm(3)
      • 5.75 mm(2)
      • 5.775 mm(1)
      • 6.75 mm(2)
      • 6.775 mm(2)
      • 7.325 mm(1)
      • 7.75 mm(1)
      • 7.775 mm(2)
      • 9.775 mm(1)
      • 12.275 mm(1)
      F Dimension Min받는 사람F Dimension Max
      F Dimension
      F Dimension
      • 0.006 in(1)
      • 0.111 in(2)
      • 0.151 in(1)
      • 0.187 in(1)
      • 0.188 in(3)
      • 0.226 in(2)
      • 0.227 in(1)
      • 0.266 in(2)
      • 0.267 in(2)
      • 0.289 in(1)
      • 0.305 in(1)
      • 0.306 in(2)
      • 0.385 in(1)
      • 0.483 in(1)
      F Dimension Min받는 사람F Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 2.0 mm(1)
      • 6.0 mm(2)
      • 8.0 mm(2)
      • 10.0 mm(4)
      • 12.0 mm(3)
      • 14.0 mm(4)
      • 15.0 mm(1)
      • 16.0 mm(3)
      • 19.5 mm(1)
      • 20.0 mm(1)
      • 22.5 mm(1)
      • 24.5 mm(1)
      • 25.0 mm(1)
      • 25.5 mm(1)
      • 29.0 mm(2)
      • 36.0 mm(2)
      • 40.0 mm(1)
      • 43.0 mm(1)
      • 52.0 mm(1)
      • 53.0 mm(1)
      • 65.0 mm(2)
      • 68.0 mm(1)
      • 76.0 mm(1)
      • 82.0 mm(1)
      • 100.0 mm(1)
      • 125.0 mm(1)
      • 200.0 mm(2)
      Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.079 in(1)
      • 0.237 in(2)
      • 0.315 in(2)
      • 0.394 in(4)
      • 0.473 in(3)
      • 0.551 in(4)
      • 0.591 in(1)
      • 0.63 in(3)
      • 0.768 in(1)
      • 0.787 in(1)
      • 0.886 in(1)
      • 0.965 in(1)
      • 0.984 in(1)
      • 1.004 in(1)
      • 1.143 in(2)
      • 1.417 in(2)
      • 1.575 in(1)
      • 1.693 in(1)
      • 2.047 in(1)
      • 2.087 in(1)
      • 2.559 in(2)
      • 2.677 in(1)
      • 2.992 in(1)
      • 3.228 in(1)
      • 3.938 in(1)
      • 4.921 in(1)
      • 7.875 in(2)
      Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 0.315 in(2)
      • 0.394 in(2)
      • 0.473 in(4)
      • 0.551 in(3)
      • 0.63 in(4)
      • 0.787 in(4)
      • 0.906 in(1)
      • 0.984 in(1)
      • 1.024 in(1)
      • 1.181 in(2)
      • 1.457 in(2)
      • 1.614 in(1)
      • 1.732 in(1)
      • 2.087 in(1)
      • 2.126 in(1)
      • 2.283 in(1)
      • 2.598 in(2)
      • 3.031 in(1)
      • 3.269 in(1)
      • 4.016 in(1)
      • 4.055 in(1)
      • 5.118 in(1)
      • 5.984 in(1)
      • 8.071 in(2)
      • 40.158 in(2)
      Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 8.0 mm(2)
      • 10.0 mm(2)
      • 12.0 mm(4)
      • 14.0 mm(3)
      • 16.0 mm(4)
      • 20.0 mm(4)
      • 23.0 mm(1)
      • 25.0 mm(1)
      • 26.0 mm(1)
      • 30.0 mm(2)
      • 37.0 mm(2)
      • 41.0 mm(1)
      • 44.0 mm(1)
      • 53.0 mm(1)
      • 54.0 mm(1)
      • 58.0 mm(1)
      • 66.0 mm(2)
      • 77.0 mm(1)
      • 83.0 mm(1)
      • 102.0 mm(1)
      • 103.0 mm(1)
      • 130.0 mm(1)
      • 152.0 mm(1)
      • 205.0 mm(2)
      • 1020.0 mm(2)
      Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • E (21)
      Rake Angle Style
      Rake Angle Style
      • NEGATIVE-ZERO (21)
      Maximum Bore Depth
      Maximum Bore Depth
      • 0.787 in(1)
      • 0.906 in(1)
      • 1.102 in(1)
      • 1.104 in(1)
      • 1.181 in(1)
      • 1.298 in(1)
      • 1.338 in(1)
      • 1.574 in(1)
      • 1.693 in(1)
      • 1.695 in(1)
      • 1.907 in(1)
      • 2.165 in(1)
      • 2.277 in(1)
      • 2.757 in(2)
      • 2.953 in(2)
      • 3.543 in(2)
      • 3.938 in(1)
      • 4.724 in(1)
      Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 20.0 mm(1)
      • 23.0 mm(1)
      • 28.0 mm(1)
      • 28.05 mm(1)
      • 30.0 mm(1)
      • 32.975 mm(1)
      • 33.975 mm(1)
      • 39.975 mm(1)
      • 43.0 mm(1)
      • 43.051 mm(1)
      • 48.426 mm(1)
      • 55.0 mm(1)
      • 57.825 mm(1)
      • 70.0 mm(2)
      • 75.0 mm(2)
      • 90.0 mm(2)
      • 100.0 mm(1)
      • 120.0 mm(1)
      Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • S (21)
      frontEnd
      Insert Shape
      Insert Shape
      • C-DIAMOND/RHOMBIC 80 (39)
      • W-TRIGON 80 (4)
      • X-TRIGON 82 (1)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.157 in(2)
      • 0.197 in(2)
      • 0.237 in(4)
      • 0.276 in(3)
      • 0.315 in(4)
      • 0.394 in(4)
      • 0.492 in(1)
      • 0.591 in(1)
      Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 4.0 mm(2)
      • 5.0 mm(2)
      • 6.0 mm(4)
      • 7.0 mm(3)
      • 8.0 mm(4)
      • 10.0 mm(4)
      • 12.5 mm(1)
      • 15.0 mm(1)
      Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
      Gage Length
      Gage Length
      • 0.576 in(1)
      • 0.63 in(3)
      • 1.161 in(1)
      • 1.772 in(1)
      • 1.891 in(1)
      • 2.677 in(1)
      • 2.757 in(4)
      • 2.835 in(2)
      • 2.992 in(2)
      • 3.228 in(1)
      • 3.307 in(1)
      • 3.346 in(4)
      • 3.386 in(3)
      • 3.543 in(1)
      • 3.701 in(1)
      • 3.938 in(1)
      • 4.016 in(2)
      • 4.094 in(2)
      • 4.331 in(4)
      • 4.488 in(1)
      • 4.724 in(1)
      • 5.118 in(2)
      • 5.236 in(1)
      • 5.433 in(2)
      • 5.827 in(1)
      • 6.299 in(1)
      Gage Length
      Gage Length
      • 110 mm(4)
      • 70 mm(4)
      • 85 mm(4)
      • 16 mm(3)
      • 86 mm(3)
      • 102 mm(2)
      • 104 mm(2)
      • 130 mm(2)
      • 138 mm(2)
      • 72 mm(2)
      • 76 mm(2)
      • 100 mm(1)
      • 114 mm(1)
      • 120 mm(1)
      • 133 mm(1)
      • 148 mm(1)
      • 160 mm(1)
      • 45 mm(1)
      • 48 mm(1)
      • 68 mm(1)
      • 82 mm(1)
      • 84 mm(1)
      • 90 mm(1)
      • 94 mm(1)
      • 14.601 mm(1)
      • 29.5 mm(1)
      insertGeometry
      Shape
      Shape
      • X-TRIGON 82 (1)
      Insert IC Size
      Insert IC Size
      • 3.975 mm(1)
      Insert IC Size Min받는 사람Insert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.156 in(1)
      Insert IC Size Min받는 사람Insert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 3.45 mm(1)
      Cutting Edge Length Min받는 사람Cutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.136 in(1)
      Cutting Edge Length Min받는 사람Cutting Edge Length Max
      Cutting Tool Material
      Cutting Tool Material
      • B H (39)
      • B L (39)
      • C N (32)
      • D P (39)
      • H T (39)
      • H W (39)
      Tolerance Class
      Tolerance Class
      • G (1)
      backEnd
      System Size
      System Size
      • HSK63A (10)
      • KM32TS (4)
      • KM40TS (2)
      • KM50TS (5)
      • KM63TS (2)
      • KM80TS (5)
      Back-End Diameter
      Back-End Diameter
      • 16.0 mm(28)
      • 18.0 mm(1)
      • 20.0 mm(1)
      • 25.0 mm(1)
      • 32.0 mm(4)
      • 40.0 mm(2)
      • 50.0 mm(5)
      • 60.0 mm(6)
      • 63.0 mm(12)
      • 80.0 mm(5)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.63 in(28)
      • 0.709 in(1)
      • 0.787 in(1)
      • 0.984 in(1)
      • 1.26 in(4)
      • 1.575 in(2)
      • 1.969 in(5)
      • 2.362 in(6)
      • 2.48 in(12)
      • 3.15 in(5)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      No filters matching ""
      eBore™ 범용
      (39)

      eBore™ 범용

      eBore™ 보링 도구
      (21)

      eBore™ 보링 도구

      eBore™ 브릿지
      (11)

      eBore™ 브릿지

      eBore™ 트윈 커터
      (22)

      eBore™ 트윈 커터

      eBore™ 디지털 디스플레이
      (2)

      eBore™ 디지털 디스플레이

      eBore™ 인서트
      (1)

      eBore™ 인서트

      내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
      Select the destination where you want to move 받는 사람.
      신제품 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      유효한 이름을 입력하십시오.
      product-image
      Please adjust the following properties from

      ISO 카탈로그 번호

      ANSI 카탈로그 번호

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      대시보드 정보를 보려면 로그인해야 합니다.
      Session expired due to inactivity, please login again
      장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
      항목이 장바구니에 추가되었습니다.
      장바구니 보기

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number ISO 카탈로그 번호 등급  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk