환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

WGC Integral Holders

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (212)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(212)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(212)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(212)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(212)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(212)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(212)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(212)
    • M Stainless Steel (212)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(212)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(212)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(212)
    • K Cast Iron (212)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(212)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(212)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(212)
    • N Non-Ferrous Materials (212)
      • N1
        Wrought Aluminum (212)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(212)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(212)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (212)
      • N6
        Carbon, Graphite Composites, CFRP (212)
    • S High-Temp Alloys (212)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(212)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(212)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(212)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(212)
    • H Hardened Materials (152)
      • H1
        Hardened Materials 44-48 HRC(152)
      • H2
        Hardened Materials 48-55 HRC(152)
    Select All Star
    • CN (14)
    • DE (17)
    • GB (3)
    • IN (1)
    • SG (15)
    • US (19)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (36)
    • Cut-OffCut-Off (177)
    • Deep GroovingDeep Grooving (36)
    • FacingFacing (61)
    • GroovingGrooving (111)
    • ID FacingID Facing (32)
    • ID GroovingID Grooving (32)
    • Multiple Direction CuttingMultiple Direction Cutting (20)
    • Plunge TurningPlunge Turning (20)
    • ProfilingProfiling (61)
    • TRN BoringTRN Boring (32)
    • TurningTurning (81)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (212)
    • Lightly Interrupted Cut (212)
    • Smooth Cut (212)
    • Varying Depth of Cut (212)
    Connection Style
    Connection Style
    • Boring Bar Shank (32)
    • Toolholder (180)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 4.5 in(36)
    • 4.921 in(28)
    • 5.0 in(2)
    • 5.021 in(10)
    • 5.906 in(26)
    • 6.0 in(52)
    • 6.005 in(8)
    • 6.694 in(18)
    • 7.0 in(10)
    • 7.087 in(4)
    • 7.875 in(12)
    • 8.0 in(6)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 114.301 mm(36)
    • 125.0 mm(28)
    • 127.0 mm(2)
    • 127.5 mm(10)
    • 150.0 mm(26)
    • 152.4 mm(52)
    • 152.5 mm(8)
    • 170.0 mm(18)
    • 177.8 mm(10)
    • 180.0 mm(4)
    • 200.0 mm(12)
    • 203.201 mm(6)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(16)
    • 0.004 in(116)
    • 0.006 in(60)
    • 0.008 in(152)
    • 0.012 in(36)
    • 0.014 in(56)
    • 0.016 in(144)
    • 0.031 in(88)
    • 0.039 in(60)
    • 0.047 in(24)
    • 0.06 in(56)
    • 0.063 in(56)
    • 0.079 in(36)
    • 0.094 in(36)
    • 0.098 in(16)
    • 0.119 in(20)
    • 0.125 in(20)
    • 0.156 in(16)
    • 0.157 in(16)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(16)
    • 0.1 mm(116)
    • 0.151 mm(60)
    • 0.2 mm(152)
    • 0.301 mm(36)
    • 0.325 mm(56)
    • 0.4 mm(144)
    • 0.775 mm(36)
    • 0.8 mm(88)
    • 1.0 mm(60)
    • 1.201 mm(24)
    • 1.5 mm(56)
    • 1.6 mm(56)
    • 2.0 mm(36)
    • 2.375 mm(36)
    • 2.5 mm(16)
    • 3.0 mm(20)
    • 3.176 mm(20)
    • 3.95 mm(16)
    • 4.0 mm(16)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WS25PT (56)
    • WU10PT (152)
    • WU25PT (212)
    • WU35PT (116)
    Hand Of Tool
    Hand Of Tool
    • L (106)
    • R (106)
    F Dimension
    F Dimension
    • 8.525 mm(2)
    • 9.0 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 11.0 mm(4)
    • 11.05 mm(4)
    • 12.0 mm(4)
    • 12.701 mm(4)
    • 13.0 mm(4)
    • 13.951 mm(2)
    • 13.976 mm(2)
    • 15.875 mm(4)
    • 15.976 mm(2)
    • 16.0 mm(4)
    • 16.1 mm(2)
    • 17.0 mm(6)
    • 17.3 mm(6)
    • 19.05 mm(4)
    • 19.075 mm(6)
    • 19.125 mm(14)
    • 20.0 mm(4)
    • 20.05 mm(6)
    • 20.1 mm(14)
    • 25.05 mm(6)
    • 25.1 mm(18)
    • 25.201 mm(4)
    • 25.326 mm(2)
    • 25.425 mm(6)
    • 25.475 mm(18)
    • 25.576 mm(4)
    • 25.701 mm(2)
    • 31.826 mm(8)
    • 31.925 mm(4)
    • 32.051 mm(4)
    • 32.075 mm(8)
    • 32.176 mm(4)
    • 32.301 mm(4)
    • 32.4 mm(2)
    • 32.65 mm(2)
    • 38.275 mm(2)
    • 38.401 mm(2)
    • 38.75 mm(2)
    • 40.176 mm(2)
    • 40.301 mm(2)
    • 40.651 mm(2)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.336 in(2)
    • 0.354 in(2)
    • 0.375 in(2)
    • 0.394 in(2)
    • 0.433 in(4)
    • 0.435 in(4)
    • 0.473 in(4)
    • 0.5 in(4)
    • 0.512 in(4)
    • 0.549 in(2)
    • 0.55 in(2)
    • 0.625 in(4)
    • 0.629 in(2)
    • 0.63 in(4)
    • 0.634 in(2)
    • 0.669 in(6)
    • 0.681 in(6)
    • 0.75 in(4)
    • 0.751 in(6)
    • 0.753 in(14)
    • 0.787 in(4)
    • 0.789 in(6)
    • 0.791 in(14)
    • 0.986 in(6)
    • 0.988 in(18)
    • 0.992 in(4)
    • 0.997 in(2)
    • 1.002 in(6)
    • 1.004 in(18)
    • 1.008 in(4)
    • 1.012 in(2)
    • 1.254 in(8)
    • 1.258 in(4)
    • 1.262 in(4)
    • 1.264 in(8)
    • 1.268 in(4)
    • 1.272 in(4)
    • 1.276 in(2)
    • 1.285 in(2)
    • 1.508 in(2)
    • 1.512 in(2)
    • 1.526 in(2)
    • 1.582 in(2)
    • 1.587 in(2)
    • 1.6 in(2)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 15.875 mm(2)
    • 16.0 mm(2)
    • 20.0 mm(8)
    • 25.0 mm(8)
    • 31.75 mm(6)
    • 32.0 mm(6)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.625 in(2)
    • 0.63 in(2)
    • 0.787 in(8)
    • 0.984 in(8)
    • 1.25 in(6)
    • 1.26 in(6)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(4)
    • 1.26 in(24)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(4)
    • 32.0 mm(24)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (180)
    • S (32)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (22)
    • NEUTRAL (ZERO) (10)
    • POSITIVE-ZERO (36)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.946 in(2)
    • 1.0 in(2)
    • 1.25 in(4)
    • 1.26 in(2)
    • 1.5 in(4)
    • 1.575 in(2)
    • 1.587 in(2)
    • 1.594 in(2)
    • 1.969 in(2)
    • 1.979 in(2)
    • 1.98 in(2)
    • 2.0 in(4)
    • 2.5 in(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 24.0 mm(2)
    • 25.401 mm(2)
    • 31.75 mm(4)
    • 32.0 mm(2)
    • 38.1 mm(4)
    • 40.0 mm(2)
    • 40.301 mm(2)
    • 40.5 mm(2)
    • 50.0 mm(2)
    • 50.276 mm(2)
    • 50.301 mm(2)
    • 50.801 mm(4)
    • 63.5 mm(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (32)
    frontEnd
    Clamp Style
    Clamp Style
    • M (36)
    • S (28)
    • Y (148)
    Cutting Width
    Cutting Width
    • 0.079 in(60)
    • 0.084 in(60)
    • 0.094 in(60)
    • 0.095 in(60)
    • 0.098 in(60)
    • 0.119 in(56)
    • 0.123 in(56)
    • 0.125 in(56)
    • 0.13 in(56)
    • 0.157 in(36)
    • 0.162 in(36)
    • 0.187 in(36)
    • 0.188 in(36)
    • 0.192 in(36)
    • 0.197 in(16)
    • 0.202 in(16)
    • 0.237 in(20)
    • 0.241 in(20)
    • 0.25 in(20)
    • 0.255 in(20)
    • 0.281 in(20)
    • 0.312 in(16)
    • 0.315 in(16)
    • 0.317 in(16)
    • 0.32 in(16)
    • 0.375 in(8)
    • 0.38 in(8)
    • 0.399 in(8)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(60)
    • 2.125 mm(60)
    • 2.375 mm(60)
    • 2.401 mm(60)
    • 2.5 mm(60)
    • 3.0 mm(56)
    • 3.125 mm(56)
    • 3.176 mm(56)
    • 3.301 mm(56)
    • 4.0 mm(36)
    • 4.125 mm(36)
    • 4.75 mm(36)
    • 4.775 mm(36)
    • 4.875 mm(36)
    • 5.0 mm(16)
    • 5.125 mm(16)
    • 6.0 mm(20)
    • 6.125 mm(20)
    • 6.351 mm(20)
    • 6.476 mm(20)
    • 7.125 mm(20)
    • 7.926 mm(16)
    • 8.0 mm(16)
    • 8.05 mm(16)
    • 8.125 mm(16)
    • 9.525 mm(8)
    • 9.65 mm(8)
    • 10.125 mm(8)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Size
    Insert Size
    • 10 (8)
    • 2 (44)
    • 3 (44)
    • 4 (36)
    • 5 (16)
    • 6 (20)
    • 8 (16)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.197 in(4)
    • 0.276 in(16)
    • 0.315 in(12)
    • 0.394 in(24)
    • 0.473 in(8)
    • 0.63 in(64)
    • 0.866 in(12)
    • 1.024 in(40)
    • 1.26 in(20)
    • 1.575 in(12)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 5.0 mm(4)
    • 7.0 mm(16)
    • 8.0 mm(12)
    • 10.0 mm(24)
    • 12.0 mm(8)
    • 16.0 mm(64)
    • 22.0 mm(12)
    • 26.0 mm(40)
    • 32.0 mm(20)
    • 40.0 mm(12)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (32)
    • SQUARE SHANK (180)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(2)
    • 12.701 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(4)
    • 19.05 mm(4)
    • 20.0 mm(4)
    • 25.0 mm(6)
    • 25.401 mm(6)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(2)
    • 0.5 in(2)
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.75 in(4)
    • 0.787 in(4)
    • 0.984 in(6)
    • 1.0 in(6)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(2)
    • 0.394 in(2)
    • 0.473 in(4)
    • 0.5 in(4)
    • 0.625 in(6)
    • 0.63 in(6)
    • 0.75 in(24)
    • 0.787 in(24)
    • 0.984 in(30)
    • 0.985 in(2)
    • 1.0 in(28)
    • 1.25 in(18)
    • 1.26 in(18)
    • 1.5 in(6)
    • 1.575 in(6)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(4)
    • 12.701 mm(4)
    • 15.875 mm(6)
    • 16.0 mm(6)
    • 19.05 mm(24)
    • 20.0 mm(24)
    • 25.0 mm(30)
    • 25.026 mm(2)
    • 25.401 mm(28)
    • 31.75 mm(18)
    • 32.0 mm(18)
    • 38.1 mm(6)
    • 40.0 mm(6)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.375 in(2)
    • 0.394 in(2)
    • 0.473 in(4)
    • 0.5 in(4)
    • 0.625 in(6)
    • 0.63 in(6)
    • 0.75 in(24)
    • 0.787 in(24)
    • 0.984 in(30)
    • 1.0 in(30)
    • 1.25 in(18)
    • 1.26 in(18)
    • 1.5 in(6)
    • 1.575 in(6)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(4)
    • 12.701 mm(4)
    • 15.875 mm(6)
    • 16.0 mm(6)
    • 19.05 mm(24)
    • 20.0 mm(24)
    • 25.0 mm(30)
    • 25.401 mm(30)
    • 31.75 mm(18)
    • 32.0 mm(18)
    • 38.1 mm(6)
    • 40.0 mm(6)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""
    WGC 일체형 툴 홀더 • 스트레이트 • Metric
    (58)

    WGC 일체형 툴 홀더 • 스트레이트 • Metric

    WGC Integral Toolholders • Straight • Inch
    (58)

    WGC Integral Toolholders • Straight • Inch

    WGC Integral Toolholders • Reinforced Front Clamp • Inch
    (14)

    WGC Integral Toolholders • Reinforced Front Clamp • Inch

    WGCSCF • 일체형 툴 홀더 • 강화 전면 클램프 • Metric
    (14)

    WGCSCF • 일체형 툴 홀더 • 강화 전면 클램프 • Metric

    WGCSM-Non Through Coolant Integral Toolholders • Integral Straight Shank
    (18)

    WGCSM-Non Through Coolant Integral Toolholders • Integral Straight Shank

    WGCSM-NTC 일체형 툴 홀더 • 일체형 스트레이트 • Metric
    (18)

    WGCSM-NTC 일체형 툴 홀더 • 일체형 스트레이트 • Metric

    WGC • Integral I.D. Grooving Boring Bars • Inch
    (16)

    WGC • Integral I.D. Grooving Boring Bars • Inch

    WGC 일체형 보링 바
    (16)

    WGC 일체형 보링 바

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?