필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (20)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(20)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(20)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(20)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(20)
    • M Stainless Steel (20)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(20)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(20)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(20)
    • K Cast Iron (20)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(20)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(20)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(20)
    • N Non-Ferrous Materials (20)
      • N1
        Wrought Aluminum (20)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(20)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(9)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (20)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (20)
      • N6
        Carbon, Graphite Composites, CFRP (20)
      • N7
        MMC's (14)
    • S High-Temp Alloys (20)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(20)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(20)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(20)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(20)
    • H Hardened Materials (20)
      • H1
        Hardened Materials 44-48 HRC(20)
      • H2
        Hardened Materials 48-55 HRC(20)
      • H3
        Hardened Materials 56-60 HRC(20)
      • H4
        Hardened Materials >60 HRC(14)
    • C CFRP Materials (20)
      • C1
        CFRP, CFRP / CFRP (20)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (14)
    Applications
    Applications
    • FacingFacing (20)
    • ID FacingID Facing (20)
    • Multiple Direction CuttingMultiple Direction Cutting (20)
    • Plunge TurningPlunge Turning (20)
    • TRN BoringTRN Boring (20)
    • TurningTurning (20)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (20)
    • Lightly Interrupted Cut (20)
    • Smooth Cut (20)
    • Varying Depth of Cut (20)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 75.0 (1)
    • 93.0 (7)
    • 95.0 (12)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (11)
    • 2.0 (17)
    • 4.0 (20)
    • 8.0 (13)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 3.15 in(2)
    • 3.543 in(5)
    • 3.938 in(2)
    • 4.331 in(4)
    • 5.513 in(3)
    • 5.906 in(4)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 80.0 mm(2)
    • 90.0 mm(5)
    • 100.0 mm(2)
    • 110.0 mm(4)
    • 140.0 mm(3)
    • 150.0 mm(4)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.004 in(15)
    • 0.008 in(12)
    • 0.014 in(3)
    • 0.016 in(20)
    • 0.031 in(20)
    • 0.047 in(20)
    • 0.062 in(8)
    • 0.063 in(14)
    • 0.094 in(2)
    • 0.095 in(3)
    • 0.126 in(2)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.1 mm(15)
    • 0.2 mm(12)
    • 0.351 mm(3)
    • 0.4 mm(20)
    • 0.8 mm(20)
    • 1.201 mm(20)
    • 1.576 mm(8)
    • 1.6 mm(14)
    • 2.375 mm(2)
    • 2.401 mm(3)
    • 3.2 mm(2)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (14)
    • 241 (8)
    • CL4 (12)
    • CM2 (14)
    • CM3 (12)
    • CM4 (11)
    • CPX (14)
    • CW2 (11)
    • CW2015 (14)
    • CW5025 (14)
    • GX (9)
    • HK1500 (12)
    • HT2 (15)
    • HTX (8)
    • K060 (9)
    • K090 (14)
    • K1 (8)
    • K10M (14)
    • K10P (16)
    • K10U (12)
    • K15U (12)
    • K20K (14)
    • K21 (9)
    • K25M (20)
    • K25P (14)
    • K313 (18)
    • K35P (6)
    • K420 (11)
    • K45 (9)
    • K68 (14)
    • KB1340 (13)
    • KB1345 (8)
    • KB1610 (9)
    • KB1625 (9)
    • KB1630 (8)
    • KB5610 (8)
    • KB5625 (9)
    • KB5630 (8)
    • KB9610 (12)
    • KB9640 (13)
    • KBH10 (12)
    • KBH10B (11)
    • KBH20 (12)
    • KBH20B (11)
    • KBK35 (8)
    • KC210 (12)
    • KC250 (11)
    • KC5010 (20)
    • KC5025 (18)
    • KC5410 (14)
    • KC5510 (18)
    • KC5525 (15)
    • KC710 (8)
    • KC720 (11)
    • KC722 (8)
    • KC730 (17)
    • KC7310 (20)
    • KC732 (11)
    • KC8050 (20)
    • KC810 (18)
    • KC850 (20)
    • KC9010 (20)
    • KC9025 (20)
    • KC910 (14)
    • KC9105 (18)
    • KC9110 (20)
    • KC9120 (20)
    • KC9125 (20)
    • KC9125RR (1)
    • KC9140 (20)
    • KC9145 (14)
    • KC9210 (3)
    • KC9215 (20)
    • KC9225 (20)
    • KC9240 (20)
    • KC9240NEW (20)
    • KC9245 (20)
    • KC9315 (20)
    • KC9320 (18)
    • KC9325 (18)
    • KC935 (20)
    • KC950 (14)
    • KC990 (20)
    • KCK05 (20)
    • KCK05B (18)
    • KCK15 (18)
    • KCK15B (20)
    • KCK20 (18)
    • KCK20B (18)
    • KCM15 (20)
    • KCM15B (20)
    • KCM25 (20)
    • KCM25B (18)
    • KCM35 (14)
    • KCM35B (14)
    • KCP05 (18)
    • KCP05B (16)
    • KCP10 (20)
    • KCP10B (20)
    • KCP25 (20)
    • KCP25B (20)
    • KCP25C (20)
    • KCP30 (20)
    • KCP30B (14)
    • KCP40 (14)
    • KCP40B (16)
    • KCPK05 (18)
    • KCS10 (8)
    • KCS10B (18)
    • KCU10 (20)
    • KCU10B (20)
    • KCU25 (18)
    • KCU25B (18)
    • KD050 (9)
    • KD081 (9)
    • KD100 (8)
    • KD120 (9)
    • KD1400 (8)
    • KD1405 (8)
    • KD1425 (8)
    • KM1 (9)
    • KMF (8)
    • KS15 (8)
    • KT1120 (8)
    • KT125 (12)
    • KT150 (9)
    • KT175 (12)
    • KT315 (18)
    • KT325 (15)
    • KTP10 (16)
    • KTP25S (11)
    • KU10T (16)
    • KU30T (18)
    • KY1310 (11)
    • KY1320 (14)
    • KY1540 (9)
    • KY1615 (14)
    • KY2000 (11)
    • KY2100 (9)
    • KY3000 (14)
    • KY3400 (11)
    • KY3500 (14)
    • KY4000 (11)
    • KY4300 (10)
    • KY4400 (14)
    • KYHK15B (14)
    • KYK10 (9)
    • KYK25 (11)
    • KYK35 (14)
    • KYS25 (9)
    • KYS30 (9)
    • NL200 (11)
    • NL250 (18)
    • NL300 (14)
    • NL400 (10)
    • NL920 (16)
    • P25 (9)
    • PB100 (8)
    • PB170 (8)
    • PB250 (8)
    • PB300 (8)
    • PS5 (15)
    • SP0819 (13)
    • SP0A00 (1)
    • SP3019 (11)
    • SP4019 (11)
    • SP61EJ (1)
    • THM (9)
    • THM-X (12)
    • THMF-X (9)
    • TN10P (20)
    • TN10U (12)
    • TN15M (16)
    • TN15U (12)
    • TN2000 (12)
    • TN20K (14)
    • TN20P (20)
    • TN30M (20)
    • TN30P (14)
    • TN4000 (12)
    • TN5015 (18)
    • TN5020 (18)
    • TN5105 (16)
    • TN5120 (18)
    • TN6010 (11)
    • TN6025 (12)
    • TN7005 (17)
    • TN7010 (20)
    • TN7015 (20)
    • TN7025 (20)
    • TN7035 (14)
    • TN7105 (15)
    • TN7110 (18)
    • TN7115 (18)
    • TN7125 (18)
    • TN7135 (14)
    • TN8025 (18)
    • TTI15 (15)
    • TTM09 (1)
    • TTR (9)
    • TTS (12)
    • TTX (11)
    • WBH10C (12)
    • WBH10P (8)
    • WBH10U (9)
    • WBH20P (12)
    • WBH25P (9)
    • WBH25U (12)
    • WBH30P (8)
    • WBK40U (13)
    • WBK45U (11)
    • WDN00U (8)
    • WDN25U (8)
    • WK05CT (18)
    • WK15CT (12)
    • WK20CT (18)
    • WM15CT (18)
    • WM25CT (18)
    • WM35CT (18)
    • WP05CT (8)
    • WP15CT (18)
    • WP20TT (4)
    • WP25CT (18)
    • WP35CT (18)
    • WS10PT (18)
    • WS25PT (18)
    • WU10HT (18)
    • WU10PT (16)
    • WU25PT (16)
    • X00511 (8)
    • X00580 (8)
    • X00581 (8)
    • X00582 (8)
    • X00583 (8)
    • X00584 (8)
    • X00585 (8)
    • X00586 (8)
    • X00591 (8)
    • X00592 (8)
    • X00593 (8)
    • X00594 (8)
    • X00596 (8)
    • X00597 (8)
    • X00599 (8)
    Hand Of Tool
    Hand Of Tool
    • L (10)
    • R (10)
    Wiper Insert
    Wiper Insert
    • N (20)
    • Y (16)
    F Dimension
    F Dimension
    • 13.0 mm(2)
    • 17.0 mm(5)
    • 22.0 mm(4)
    • 27.0 mm(3)
    • 35.0 mm(6)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.512 in(2)
    • 0.669 in(5)
    • 0.866 in(4)
    • 1.063 in(3)
    • 1.379 in(6)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 25.0 mm(2)
    • 32.0 mm(5)
    • 40.0 mm(4)
    • 50.0 mm(3)
    • 63.0 mm(6)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.984 in(2)
    • 1.26 in(5)
    • 1.575 in(4)
    • 1.969 in(3)
    • 2.48 in(6)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (12)
    • E (8)
    Maximum Bore Depth
    Maximum Bore Depth
    • 2.205 in(2)
    • 2.638 in(5)
    • 3.465 in(4)
    • 3.938 in(2)
    • 4.686 in(3)
    • 5.906 in(4)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 56.0 mm(2)
    • 67.0 mm(5)
    • 88.0 mm(4)
    • 100.0 mm(2)
    • 119.0 mm(3)
    • 150.0 mm(4)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (12)
    • D-DIAMOND/RHOMBIC 55 (7)
    • S-SQUARE 90 (1)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (16)
    • B L (12)
    • C A (14)
    • C N (14)
    • D P (11)
    • H T (18)
    • H W (20)
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?