환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

M-Clamping

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (23)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(23)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(23)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(23)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(23)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(23)
    • M Stainless Steel (23)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(23)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(23)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(23)
    • K Cast Iron (23)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
    • N Non-Ferrous Materials (13)
      • N1
        Wrought Aluminum (13)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(13)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(8)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (13)
      • N6
        Carbon, Graphite Composites, CFRP (13)
      • N7
        MMC's (13)
    • S High-Temp Alloys (18)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(18)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(18)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(18)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(18)
    • H Hardened Materials (13)
      • H1
        Hardened Materials 44-48 HRC(13)
      • H2
        Hardened Materials 48-55 HRC(13)
      • H3
        Hardened Materials 56-60 HRC(13)
      • H4
        Hardened Materials >60 HRC(2)
    • C CFRP Materials (13)
      • C1
        CFRP, CFRP / CFRP (13)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (13)
    Applications
    Applications
    • FacingFacing (21)
    • Multiple Direction CuttingMultiple Direction Cutting (8)
    • ProfilingProfiling (8)
    • TRN BoringTRN Boring (13)
    • TurningTurning (23)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (23)
    • Lightly Interrupted Cut (23)
    • Smooth Cut (23)
    • Varying Depth of Cut (23)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (2)
    • 75.0 (15)
    • 93.0 (2)
    • 95.0 (4)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (22)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (8)
    • 2.0 (13)
    • 4.0 (23)
    • 8.0 (23)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.004 in(2)
    • 0.008 in(2)
    • 0.016 in(2)
    • 0.031 in(13)
    • 0.047 in(13)
    • 0.063 in(21)
    • 0.094 in(10)
    • 0.095 in(21)
    • 0.126 in(10)
    • 0.157 in(5)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.1 mm(2)
    • 0.2 mm(2)
    • 0.4 mm(2)
    • 0.8 mm(13)
    • 1.201 mm(13)
    • 1.6 mm(21)
    • 2.375 mm(10)
    • 2.401 mm(21)
    • 3.2 mm(10)
    • 4.0 mm(5)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (8)
    • CL4 (11)
    • CM2 (7)
    • CM3 (11)
    • CPX (11)
    • CW2015 (8)
    • CW5025 (8)
    • GX (11)
    • HK1500 (6)
    • K090 (13)
    • K1 (16)
    • K10M (13)
    • K10P (8)
    • K10U (2)
    • K15U (2)
    • K20K (13)
    • K21 (11)
    • K25M (2)
    • K25P (13)
    • K313 (13)
    • K35P (5)
    • K420 (18)
    • K45 (2)
    • K68 (13)
    • KB1610 (2)
    • KB1625 (2)
    • KB1630 (2)
    • KB5610 (2)
    • KB5625 (2)
    • KB5630 (2)
    • KB9610 (2)
    • KBH10 (2)
    • KBH10B (2)
    • KBH20 (2)
    • KBH20B (2)
    • KC210 (11)
    • KC250 (11)
    • KC5010 (23)
    • KC5025 (13)
    • KC5410 (13)
    • KC5510 (13)
    • KC720 (7)
    • KC730 (13)
    • KC7310 (13)
    • KC732 (2)
    • KC8050 (23)
    • KC810 (13)
    • KC850 (23)
    • KC9010 (13)
    • KC9025 (23)
    • KC910 (13)
    • KC9105 (8)
    • KC9110 (23)
    • KC9120 (23)
    • KC9125 (23)
    • KC9140 (23)
    • KC9145 (23)
    • KC9215 (13)
    • KC9225 (13)
    • KC9240 (23)
    • KC9240NEW (18)
    • KC9245 (13)
    • KC9315 (13)
    • KC9320 (13)
    • KC9325 (13)
    • KC935 (18)
    • KC950 (18)
    • KC990 (18)
    • KCK05 (13)
    • KCK05B (13)
    • KCK15 (13)
    • KCK15B (13)
    • KCK20 (13)
    • KCK20B (18)
    • KCM15 (13)
    • KCM15B (8)
    • KCM25 (18)
    • KCM25B (18)
    • KCM35 (13)
    • KCM35B (11)
    • KCP05 (2)
    • KCP05B (7)
    • KCP10 (23)
    • KCP10B (18)
    • KCP25 (23)
    • KCP25B (23)
    • KCP25C (23)
    • KCP30 (23)
    • KCP30B (21)
    • KCP40 (21)
    • KCP40B (23)
    • KCPK05 (13)
    • KCS10B (13)
    • KCU10 (23)
    • KCU10B (13)
    • KCU25 (13)
    • KCU25B (13)
    • KD050 (2)
    • KD081 (2)
    • KD100 (2)
    • KD120 (2)
    • KD1400 (2)
    • KD1405 (2)
    • KD1425 (2)
    • KM1 (5)
    • KT1120 (2)
    • KT125 (2)
    • KT150 (2)
    • KT175 (2)
    • KT315 (2)
    • KT5020 (2)
    • KTP10 (2)
    • KTP25S (2)
    • KU10T (2)
    • KU30T (13)
    • KY1320 (8)
    • KY1540 (6)
    • KY1615 (8)
    • KY2000 (6)
    • KY3000 (13)
    • KY3400 (11)
    • KY3500 (13)
    • KY4000 (2)
    • KY4300 (6)
    • KY4400 (8)
    • KYHK15B (8)
    • KYK25 (6)
    • KYK35 (13)
    • KYS25 (6)
    • KYS30 (6)
    • NL250 (13)
    • NL300 (21)
    • NL400 (11)
    • NL920 (5)
    • SP0819 (11)
    • SP3019 (11)
    • SP4019 (6)
    • SP4036 (2)
    • SP4093 (2)
    • SPADAP (21)
    • SPN4W2 (5)
    • THM (11)
    • TN10P (8)
    • TN10U (2)
    • TN15M (13)
    • TN15U (2)
    • TN2000 (11)
    • TN20K (13)
    • TN20P (13)
    • TN30M (13)
    • TN30P (16)
    • TN4000 (11)
    • TN5015 (11)
    • TN5020 (11)
    • TN5120 (11)
    • TN6010 (2)
    • TN7010 (11)
    • TN7015 (21)
    • TN7025 (21)
    • TN7035 (11)
    • TN7110 (6)
    • TN7115 (21)
    • TN7125 (21)
    • TN7135 (11)
    • TN8025 (21)
    • TTM09 (5)
    • TTR-X (5)
    • TTS (11)
    • W00342 (5)
    • WBH10C (2)
    • WBH10P (2)
    • WBH10U (2)
    • WBH20P (2)
    • WBH25P (2)
    • WBH30P (2)
    • WDN25U (2)
    • WK05CT (13)
    • WK20CT (13)
    • WM15CT (13)
    • WM25CT (18)
    • WM35CT (13)
    • WP15CT (23)
    • WP25CT (23)
    • WP35CT (23)
    • WS10PT (13)
    • WS25PT (13)
    • WU10HT (8)
    • WU10PT (2)
    • WU25PT (2)
    Hand Of Tool
    Hand Of Tool
    • L (10)
    • N (2)
    • R (10)
    Wiper Insert
    Wiper Insert
    • N (23)
    • Y (4)
    F Dimension
    F Dimension
    • 0.0 mm(2)
    • 48.0 mm(8)
    • 53.0 mm(12)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(2)
    • 1.891 in(8)
    • 2.087 in(12)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 106.0 mm(13)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 4.173 in(13)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (4)
    • E (8)
    • S (10)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (20)
    • NEGATIVE-ZERO (2)
    Maximum Bore Depth
    Maximum Bore Depth
    • 2.757 in(13)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 70.0 mm(13)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (11)
    • S-SQUARE 90 (10)
    • V-DIAMOND/RHOMBIC 35 (2)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (2)
    • B L (2)
    • C A (13)
    • C N (13)
    • D P (2)
    • H T (2)
    • H W (23)
    backEnd
    Connection Type
    Connection Type
    • TAPER SHANK (22)
    System Size
    System Size
    • KM80ATC (22)
    No filters matching ""
    MCKN 75°
    (3)

    MCKN 75°

    MSRN 75°
    (4)

    MSRN 75°

    MSDN 45°
    (2)

    MSDN 45°

    MSKN 75°
    (4)

    MSKN 75°

    MVUN 93°
    (2)

    MVUN 93°

    MCRN 75°
    (4)

    MCRN 75°

    MCLN 95°
    (4)

    MCLN 95°

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk