필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (45)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(45)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(45)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(45)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(45)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(45)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(45)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(45)
- M Stainless Steel (45)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(45)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(45)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(45)
- K Cast Iron (45)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(45)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(45)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(45)
- N Non-Ferrous Materials (45)
- N1Wrought Aluminum (45)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(45)
- N3High-Silicon Aluminum Alloys Si >12.2%(42)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (45)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (45)
- N6Carbon, Graphite Composites, CFRP (45)
- N7MMC's (42)
- S High-Temp Alloys (45)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(45)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(45)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(45)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(45)
- H Hardened Materials (42)
- H1Hardened Materials 44-48 HRC(42)
- H2Hardened Materials 48-55 HRC(42)
- H3Hardened Materials 56-60 HRC(42)
- H4Hardened Materials >60 HRC(42)
- C CFRP Materials (45)
- C1CFRP, CFRP / CFRP (45)
- C2CFRP / Aluminium CFRP / Non-Ferrous (42)
Applications
Applications
Facing (16)
Multiple Direction Cutting (28)
Profiling (28)
Turning (40)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (45)
- Lightly Interrupted Cut (45)
- Smooth Cut (45)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 62.5 (2)
- 90.0 (15)
- 93.0 (20)
- 95.0 (8)
받는 사람
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (42)
- 2.0 (32)
- 3.0 (13)
- 4.0 (9)
받는 사람
Over All Length [L]
Over All Length [L]
- 0.787 in(42)
- 1.181 in(3)
받는 사람
Over All Length [L]
Over All Length [L]
- 20.0 mm(42)
- 30.0 mm(3)
받는 사람
Corner Radius
Corner Radius
- 0.0 in(17)
- 0.001 in(29)
- 0.002 in(42)
- 0.004 in(42)
- 0.008 in(42)
- 0.016 in(42)
- 0.031 in(45)
- 0.047 in(30)
- 0.063 in(9)
받는 사람
Corner Radius
Corner Radius
- 0.0 mm(17)
- 0.025 mm(29)
- 0.05 mm(42)
- 0.1 mm(42)
- 0.2 mm(42)
- 0.4 mm(42)
- 0.8 mm(45)
- 1.201 mm(30)
- 1.6 mm(9)
받는 사람
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- GH1 (12)
- HCK10 (21)
- HK1500 (24)
- HK35 (12)
- HT2 (42)
- HTX (38)
- HWK10 (4)
- HWK15 (21)
- K1010P (12)
- K10M (33)
- K10P (18)
- K10U (42)
- K15U (42)
- K20K (30)
- K25M (15)
- K25P (11)
- K313 (42)
- K420 (12)
- K68 (42)
- KB1345 (21)
- KB1610 (28)
- KB1625 (21)
- KB1630 (9)
- KB5610 (34)
- KB5625 (34)
- KB5630 (24)
- KB9610 (34)
- KBH10 (36)
- KBH20 (42)
- KC5010 (45)
- KC5020P (23)
- KC5025 (45)
- KC5410 (42)
- KC720 (42)
- KC730 (45)
- KC732 (45)
- KC8050 (42)
- KC810 (42)
- KC850 (45)
- KC9010 (25)
- KC9025 (45)
- KC910 (45)
- KC9105 (42)
- KC9110 (42)
- KC9120 (31)
- KC9125 (42)
- KC9225 (42)
- KC9240 (42)
- KC9240NEW (42)
- KC9315 (42)
- KC9320 (42)
- KC9325 (31)
- KC935 (45)
- KC950 (34)
- KC990 (31)
- KCD25 (42)
- KCK05 (42)
- KCK05B (42)
- KCK15 (34)
- KCK15B (34)
- KCK20 (42)
- KCK20B (42)
- KCM15 (42)
- KCM15B (28)
- KCM25 (42)
- KCM25B (42)
- KCM25S (21)
- KCM35 (34)
- KCM35B (31)
- KCP05 (42)
- KCP05B (12)
- KCP10 (42)
- KCP10B (42)
- KCP15 (3)
- KCP20S (21)
- KCP25 (45)
- KCP25B (42)
- KCP25C (45)
- KCP30 (42)
- KCP30B (9)
- KCP40B (3)
- KCS10 (45)
- KCS10B (42)
- KCS25S (21)
- KCU10 (42)
- KCU10B (45)
- KCU25 (42)
- KCU25B (45)
- KD050 (16)
- KD081 (16)
- KD100 (3)
- KD1400 (42)
- KD1405 (3)
- KD1425 (42)
- KN10S (29)
- KT125 (12)
- KT175 (32)
- KT315 (45)
- KT325 (42)
- KTP10 (42)
- KTP25S (42)
- KU10 (36)
- KU10T (42)
- KU30T (42)
- PB100 (22)
- PB170 (10)
- PB250 (22)
- PB300 (4)
- PD100 (21)
- PD50 (12)
- SP0G00 (4)
- SPN3W1 (9)
- THM (34)
- THM-X (21)
- TN10P (42)
- TN10U (42)
- TN15M (42)
- TN15U (42)
- TN2000 (24)
- TN20K (42)
- TN20P (42)
- TN30M (42)
- TN4000 (12)
- TN5015 (31)
- TN5020 (30)
- TN5105 (31)
- TN5120 (34)
- TN6010 (27)
- TN6025 (27)
- TN7005 (30)
- TN7010 (30)
- TN7015 (34)
- TN7025 (30)
- TN7035 (30)
- TN7105 (34)
- TN7110 (34)
- TN7115 (34)
- TN7125 (34)
- TN7135 (34)
- TN8025 (27)
- TTI15 (28)
- TTM (9)
- TTM09 (10)
- TTR (31)
- TTS (9)
- TTX (24)
- W00342 (12)
- WBH10C (24)
- WBH10P (24)
- WBH10U (28)
- WBH20P (31)
- WBH25P (28)
- WBH25U (21)
- WBH30P (24)
- WBK45U (31)
- WDN00U (9)
- WDN25U (42)
- WK05CT (31)
- WK15CT (34)
- WK20CT (34)
- WM15CT (42)
- WM25CT (42)
- WP15CT (42)
- WP20TT (16)
- WP25CT (42)
- WP35CT (24)
- WS10PT (27)
- WS25PT (27)
- WU05PT (31)
- WU10HT (34)
- WU10PT (42)
- WU25PT (34)
- YY3A00 (4)
Hand Of Tool
Hand Of Tool
- L (20)
- N (2)
- R (23)
Wiper Insert
Wiper Insert
- N (45)
- Y (11)
F Dimension
F Dimension
- 0.0 mm(2)
- 8.0 mm(13)
- 10.0 mm(30)
받는 사람
F Dimension
F Dimension
- 0.0 in(2)
- 0.315 in(13)
- 0.394 in(30)
받는 사람
Cutting Direction
Cutting Direction
- B (8)
- S (37)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (40)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (9)
- D-DIAMOND/RHOMBIC 55 (12)
- T-TRIANGLE 60 (10)
- V-DIAMOND/RHOMBIC 35 (11)
- W-TRIGON 80 (3)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (34)
- B L (42)
- C N (9)
- D P (42)
- H T (45)
- H W (45)
backEnd
System Size
System Size
- KM12 (14)
- KM16 (31)
Back-End Diameter
Back-End Diameter
- 12.0 mm(14)
- 16.0 mm(31)
받는 사람
Back-End Diameter
Back-End Diameter
- 0.473 in(14)
- 0.63 in(31)
받는 사람
No filters matching ""
