환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

    합리적인 가격의 성능

    WCE 솔리드 및 밀링 플랫폼은 고성능 및 범용 기능을 결합하여 4날 및 5날 형상 모두에서 합리적인 가격으로 제공되는 하나의 엔드밀 제품군으로 제공합니다. 이 중소형 매장 필수품은 소규모 배치를 가공하도록 제작되었습니다.

    WCE4 4날 형상은 비대칭 인덱스와 가변 헬릭스 기능을 합리적인 가격으로 결합하여 재료 및 용도의 다양성을 보장하면서도 풀 슬롯 및 헤비 컷과 같은 까다로운 작업을 수행하는 데 사용할 수 있습니다.

    WCE5 5날 형상은 주로 탄소강과 스테인리스강 숄더링 및 측면 밀링 애플리케이션에 사용할 수 있도록 저렴한 가격으로 향상된 38도 헬릭스 기능과 부등분할 인덱스를 결합한 제품입니다.

    Stack of WCE End Mills catalog covers

    WCE를 살펴보십시오. 자세한 내용은 다목적 솔리드 카바이드 엔드밀 브로슈어를 참조하십시오.

    미터 단위 브로슈어 보기
    필터 선택
    필터
    필터
      필터 보기 위치
      Metric
      Inch
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (384)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(384)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(384)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(384)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(384)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(384)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(384)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(384)
      • M Stainless Steel (384)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(384)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(384)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(384)
      • K Cast Iron (384)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(384)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(384)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(384)
      • S High-Temp Alloys (384)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(384)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(384)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(384)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(384)
      • H Hardened Materials (384)
        • H1
          Hardened Materials 44-48 HRC(384)
        • H2
          Hardened Materials 48-55 HRC(384)
      Applications
      Applications
      • Face MillingFace Milling (10)
      • PocketPocket (36)
      • Pocket HelicalPocket Helical (363)
      • Pocket MillingPocket Milling (363)
      • Profile MillingProfile Milling (24)
      • RampingRamping (360)
      • Shoulder Ball NoseShoulder Ball Nose (24)
      • Shoulder MillingShoulder Milling (384)
      • Shoulder RoughingShoulder Roughing (113)
      • Shoulder Square EndShoulder Square End (341)
      • Slot Ball NoseSlot Ball Nose (24)
      • Slot MillingSlot Milling (312)
      • Slot Square EndSlot Square End (288)
      • Trochoidal MillingTrochoidal Milling (113)
      Cutting Diameter
      Cutting Diameter
      • 0.119 in(6)
      • 0.125 in(7)
      • 0.157 in(12)
      • 0.188 in(12)
      • 0.197 in(16)
      • 0.237 in(17)
      • 0.25 in(21)
      • 0.313 in(20)
      • 0.315 in(19)
      • 0.375 in(27)
      • 0.394 in(20)
      • 0.438 in(6)
      • 0.473 in(22)
      • 0.5 in(56)
      • 0.625 in(24)
      • 0.63 in(19)
      • 0.75 in(30)
      • 0.787 in(19)
      • 0.984 in(2)
      • 1.0 in(29)
      Cutting Diameter Min받는 사람Cutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 3.0 mm(6)
      • 3.176 mm(7)
      • 4.0 mm(12)
      • 4.775 mm(12)
      • 5.0 mm(16)
      • 6.0 mm(17)
      • 6.351 mm(21)
      • 7.95 mm(20)
      • 8.0 mm(19)
      • 9.525 mm(27)
      • 10.0 mm(20)
      • 11.125 mm(6)
      • 12.0 mm(22)
      • 12.701 mm(56)
      • 15.875 mm(24)
      • 16.0 mm(19)
      • 19.05 mm(30)
      • 20.0 mm(19)
      • 25.0 mm(2)
      • 25.401 mm(29)
      Cutting Diameter Min받는 사람Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 6.351 mm(3)
      • 7.95 mm(4)
      • 8.0 mm(6)
      • 9.525 mm(6)
      • 11.0 mm(12)
      • 12.701 mm(16)
      • 13.0 mm(32)
      • 15.875 mm(16)
      • 19.0 mm(18)
      • 19.05 mm(25)
      • 22.0 mm(18)
      • 22.225 mm(19)
      • 25.0 mm(1)
      • 25.401 mm(2)
      • 26.0 mm(20)
      • 30.0 mm(1)
      • 31.75 mm(48)
      • 32.0 mm(20)
      • 38.0 mm(19)
      • 38.1 mm(31)
      • 41.276 mm(10)
      • 44.45 mm(5)
      • 45.0 mm(1)
      • 50.0 mm(1)
      • 50.801 mm(14)
      • 51.0 mm(1)
      • 53.975 mm(1)
      • 57.0 mm(2)
      • 57.151 mm(9)
      • 63.5 mm(6)
      • 76.2 mm(11)
      • 101.601 mm(6)
      Cutting Length Min받는 사람Cutting Length Max
      Cutting Length
      Cutting Length
      • 0.25 in(3)
      • 0.313 in(4)
      • 0.315 in(6)
      • 0.375 in(6)
      • 0.433 in(12)
      • 0.5 in(16)
      • 0.512 in(32)
      • 0.625 in(16)
      • 0.748 in(18)
      • 0.75 in(25)
      • 0.866 in(18)
      • 0.875 in(19)
      • 0.984 in(1)
      • 1.0 in(2)
      • 1.024 in(20)
      • 1.181 in(1)
      • 1.25 in(48)
      • 1.26 in(20)
      • 1.496 in(19)
      • 1.5 in(31)
      • 1.625 in(10)
      • 1.75 in(5)
      • 1.772 in(1)
      • 1.969 in(1)
      • 2.0 in(14)
      • 2.008 in(1)
      • 2.125 in(1)
      • 2.244 in(2)
      • 2.25 in(9)
      • 2.5 in(6)
      • 3.0 in(11)
      • 4.0 in(6)
      Cutting Length Min받는 사람Cutting Length Max
      Reach
      Reach
      • 0.531 in(1)
      • 0.591 in(4)
      • 0.626 in(1)
      • 0.63 in(4)
      • 0.669 in(3)
      • 0.709 in(6)
      • 0.828 in(9)
      • 0.886 in(1)
      • 1.024 in(1)
      • 1.063 in(11)
      • 1.181 in(2)
      • 1.201 in(1)
      • 1.24 in(1)
      • 1.26 in(11)
      • 1.476 in(1)
      • 1.488 in(1)
      • 1.496 in(13)
      • 1.575 in(12)
      • 1.732 in(9)
      • 1.752 in(1)
      • 1.969 in(2)
      • 2.087 in(5)
      • 2.165 in(4)
      • 2.274 in(1)
      • 2.953 in(1)
      Reach Min받는 사람Reach Max
      Reach
      Reach
      • 13.5 mm(1)
      • 15.0 mm(4)
      • 15.9 mm(1)
      • 16.0 mm(4)
      • 17.0 mm(3)
      • 18.0 mm(6)
      • 21.0 mm(9)
      • 22.5 mm(1)
      • 26.0 mm(1)
      • 27.0 mm(11)
      • 30.0 mm(2)
      • 30.5 mm(1)
      • 31.5 mm(1)
      • 32.0 mm(11)
      • 37.5 mm(1)
      • 37.801 mm(1)
      • 38.0 mm(13)
      • 40.0 mm(12)
      • 44.0 mm(9)
      • 44.5 mm(1)
      • 50.0 mm(2)
      • 53.0 mm(5)
      • 55.0 mm(4)
      • 57.75 mm(1)
      • 75.0 mm(1)
      Reach Min받는 사람Reach Max
      Connection Style
      Connection Style
      • Straight-Cylindrical (208)
      • Weldon (176)
      Number of Flutes
      Number of Flutes
      • 4 (271)
      • 5 (113)
      Over All Length [L]
      Over All Length [L]
      • 1.5 in(3)
      • 2.0 in(25)
      • 2.244 in(50)
      • 2.25 in(8)
      • 2.48 in(18)
      • 2.5 in(42)
      • 2.835 in(19)
      • 2.992 in(1)
      • 3.0 in(17)
      • 3.25 in(22)
      • 3.269 in(21)
      • 3.426 in(1)
      • 3.5 in(17)
      • 3.504 in(1)
      • 3.622 in(18)
      • 3.938 in(1)
      • 4.0 in(50)
      • 4.094 in(18)
      • 4.125 in(5)
      • 4.5 in(11)
      • 4.764 in(2)
      • 4.921 in(2)
      • 5.0 in(15)
      • 6.0 in(11)
      • 7.0 in(6)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 38.1 mm(3)
      • 50.801 mm(25)
      • 57.0 mm(50)
      • 57.151 mm(8)
      • 63.0 mm(18)
      • 63.5 mm(42)
      • 72.0 mm(19)
      • 76.0 mm(1)
      • 76.2 mm(17)
      • 82.551 mm(22)
      • 83.0 mm(21)
      • 87.0 mm(1)
      • 88.9 mm(17)
      • 89.0 mm(1)
      • 92.0 mm(18)
      • 100.0 mm(1)
      • 101.601 mm(50)
      • 104.0 mm(18)
      • 104.775 mm(5)
      • 114.301 mm(11)
      • 121.0 mm(2)
      • 125.0 mm(2)
      • 127.0 mm(15)
      • 152.4 mm(11)
      • 177.8 mm(6)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      cornerConfiguration
      Corner Style
      Corner Style
      • BALL NOSE (24)
      • CHAMFER (82)
      • RADIUS (203)
      • SQUARE END (75)
      Corner Radius
      Corner Radius
      • 0.0 in(157)
      • 0.008 in(5)
      • 0.015 in(22)
      • 0.02 in(12)
      • 0.03 in(40)
      • 0.039 in(14)
      • 0.06 in(45)
      • 0.063 in(1)
      • 0.079 in(10)
      • 0.09 in(23)
      • 0.094 in(1)
      • 0.098 in(2)
      • 0.119 in(6)
      • 0.12 in(22)
      • 0.125 in(1)
      • 0.156 in(1)
      • 0.157 in(8)
      • 0.188 in(1)
      • 0.197 in(2)
      • 0.237 in(2)
      • 0.25 in(2)
      • 0.313 in(1)
      • 0.315 in(2)
      • 0.375 in(1)
      • 0.394 in(2)
      • 0.5 in(1)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(157)
      • 0.2 mm(5)
      • 0.375 mm(22)
      • 0.5 mm(12)
      • 0.75 mm(40)
      • 1.0 mm(14)
      • 1.5 mm(8)
      • 1.526 mm(37)
      • 1.6 mm(1)
      • 2.0 mm(10)
      • 2.275 mm(23)
      • 2.375 mm(1)
      • 2.5 mm(2)
      • 3.0 mm(6)
      • 3.051 mm(22)
      • 3.176 mm(1)
      • 3.975 mm(1)
      • 4.0 mm(8)
      • 4.775 mm(1)
      • 5.0 mm(2)
      • 6.0 mm(2)
      • 6.351 mm(2)
      • 7.95 mm(1)
      • 8.0 mm(2)
      • 9.525 mm(1)
      • 10.0 mm(2)
      • 12.701 mm(1)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(302)
      • 0.151 mm(4)
      • 0.2 mm(9)
      • 0.25 mm(4)
      • 0.301 mm(4)
      • 0.351 mm(3)
      • 0.4 mm(16)
      • 0.5 mm(42)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(302)
      • 0.006 in(4)
      • 0.008 in(9)
      • 0.01 in(4)
      • 0.012 in(4)
      • 0.014 in(3)
      • 0.016 in(16)
      • 0.02 in(42)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      application
      Rough Finish
      Rough Finish
      • F (380)
      Maximum Ramp Angle
      Maximum Ramp Angle
      • 3.0 (23)
      Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
      frontEnd
      Neck Diameter
      Neck Diameter
      • 0.111 in(2)
      • 0.148 in(5)
      • 0.185 in(9)
      • 0.222 in(9)
      • 0.296 in(11)
      • 0.37 in(11)
      • 0.444 in(13)
      • 0.593 in(11)
      • 0.74 in(11)
      • 0.925 in(1)
      Neck Diameter Min받는 사람Neck Diameter Max
      Neck Diameter
      Neck Diameter
      • 2.825 mm(2)
      • 3.75 mm(5)
      • 4.7 mm(9)
      • 5.65 mm(9)
      • 7.525 mm(11)
      • 9.4 mm(11)
      • 11.275 mm(13)
      • 15.05 mm(11)
      • 18.8 mm(11)
      • 23.5 mm(1)
      Neck Diameter Min받는 사람Neck Diameter Max
      backEnd
      Back-End Diameter
      Back-End Diameter
      • 3.176 mm(7)
      • 4.775 mm(12)
      • 6.0 mm(51)
      • 6.351 mm(21)
      • 7.95 mm(20)
      • 8.0 mm(19)
      • 9.525 mm(27)
      • 10.0 mm(20)
      • 11.125 mm(6)
      • 12.0 mm(22)
      • 12.701 mm(56)
      • 15.875 mm(24)
      • 16.0 mm(19)
      • 19.05 mm(30)
      • 20.0 mm(19)
      • 25.0 mm(2)
      • 25.401 mm(29)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.125 in(7)
      • 0.188 in(12)
      • 0.237 in(51)
      • 0.25 in(21)
      • 0.313 in(20)
      • 0.315 in(19)
      • 0.375 in(27)
      • 0.394 in(20)
      • 0.438 in(6)
      • 0.473 in(22)
      • 0.5 in(56)
      • 0.625 in(24)
      • 0.63 in(19)
      • 0.75 in(30)
      • 0.787 in(19)
      • 0.984 in(2)
      • 1.0 in(29)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      No filters matching ""
      WCE4 • 4-Flute
      (271)

      WCE4 • 4-Flute

      WCE5 • 5-Flute
      (113)

      WCE5 • 5-Flute

      내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
      Select the destination where you want to move 받는 사람.
      신제품 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      유효한 이름을 입력하십시오.
      product-image
      Please adjust the following properties from

      ISO 카탈로그 번호

      ANSI 카탈로그 번호

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      대시보드 정보를 보려면 로그인해야 합니다.
      Session expired due to inactivity, please login again
      장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
      항목이 장바구니에 추가되었습니다.
      장바구니 보기

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO 카탈로그 번호등급  

      You are about to leave the Solution building process.

      Are you sure you want to leave?