환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

정삭 공구

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (99)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(99)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(99)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(99)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(99)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(98)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(87)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(87)
    • M Stainless Steel (99)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(99)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(98)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(87)
    • K Cast Iron (99)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(99)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(98)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(87)
    • N Non-Ferrous Materials (11)
      • N1
        Wrought Aluminum (11)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(11)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(10)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (11)
      • N6
        Carbon, Graphite Composites, CFRP (11)
    • S High-Temp Alloys (87)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(87)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(87)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(87)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(87)
    • H Hardened Materials (88)
      • H1
        Hardened Materials 44-48 HRC(88)
      • H2
        Hardened Materials 48-55 HRC(10)
    Select All Star
    • CN (9)
    • DE (18)
    • GB (11)
    • SG (6)
    • US (32)
    Applications
    Applications
    • PocketPocket (57)
    • Pocket HelicalPocket Helical (76)
    • Pocket MillingPocket Milling (68)
    • Pocket Plunge MillingPocket Plunge Milling (11)
    • Profile MillingProfile Milling (3)
    • RampingRamping (45)
    • Shoulder Ball NoseShoulder Ball Nose (14)
    • Shoulder MillingShoulder Milling (89)
    • Shoulder RoughingShoulder Roughing (24)
    • Shoulder Square EndShoulder Square End (99)
    • Slot Ball NoseSlot Ball Nose (14)
    • Slot MillingSlot Milling (44)
    • Slot Square EndSlot Square End (46)
    Cutting Diameter
    Cutting Diameter
    • 0.039 in(2)
    • 0.06 in(2)
    • 0.079 in(3)
    • 0.098 in(3)
    • 0.119 in(7)
    • 0.125 in(2)
    • 0.138 in(2)
    • 0.157 in(8)
    • 0.177 in(1)
    • 0.188 in(2)
    • 0.197 in(5)
    • 0.237 in(10)
    • 0.25 in(8)
    • 0.313 in(2)
    • 0.315 in(10)
    • 0.375 in(6)
    • 0.394 in(10)
    • 0.473 in(11)
    • 0.5 in(8)
    • 0.551 in(3)
    • 0.625 in(3)
    • 0.63 in(8)
    • 0.709 in(1)
    • 0.75 in(9)
    • 0.787 in(4)
    • 0.984 in(1)
    • 1.0 in(5)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.0 mm(2)
    • 1.5 mm(2)
    • 2.0 mm(3)
    • 2.5 mm(3)
    • 3.0 mm(7)
    • 3.176 mm(2)
    • 3.5 mm(2)
    • 4.0 mm(8)
    • 4.5 mm(1)
    • 4.775 mm(2)
    • 5.0 mm(5)
    • 6.0 mm(10)
    • 6.351 mm(8)
    • 7.95 mm(2)
    • 8.0 mm(10)
    • 9.525 mm(6)
    • 10.0 mm(10)
    • 12.0 mm(11)
    • 12.701 mm(8)
    • 14.0 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(8)
    • 18.0 mm(1)
    • 19.05 mm(9)
    • 20.0 mm(4)
    • 25.0 mm(1)
    • 25.401 mm(5)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.0 mm(8)
    • 4.0 mm(4)
    • 5.0 mm(4)
    • 6.0 mm(1)
    • 7.0 mm(5)
    • 8.0 mm(3)
    • 9.0 mm(3)
    • 9.5 mm(1)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 11.0 mm(4)
    • 11.125 mm(1)
    • 12.0 mm(6)
    • 12.701 mm(5)
    • 13.0 mm(4)
    • 14.0 mm(4)
    • 15.875 mm(4)
    • 16.0 mm(4)
    • 19.0 mm(4)
    • 19.05 mm(3)
    • 20.0 mm(2)
    • 20.651 mm(1)
    • 22.0 mm(9)
    • 22.225 mm(3)
    • 25.0 mm(3)
    • 25.401 mm(2)
    • 26.0 mm(8)
    • 28.576 mm(2)
    • 31.75 mm(5)
    • 32.0 mm(7)
    • 38.0 mm(3)
    • 38.1 mm(7)
    • 45.0 mm(1)
    • 50.801 mm(2)
    • 57.151 mm(5)
    • 76.2 mm(2)
    • 101.601 mm(1)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.119 in(8)
    • 0.157 in(4)
    • 0.197 in(4)
    • 0.237 in(1)
    • 0.276 in(5)
    • 0.315 in(3)
    • 0.354 in(3)
    • 0.374 in(1)
    • 0.375 in(2)
    • 0.394 in(3)
    • 0.433 in(4)
    • 0.438 in(1)
    • 0.473 in(6)
    • 0.5 in(5)
    • 0.512 in(4)
    • 0.551 in(4)
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.748 in(4)
    • 0.75 in(3)
    • 0.787 in(2)
    • 0.814 in(1)
    • 0.866 in(9)
    • 0.875 in(3)
    • 0.984 in(3)
    • 1.0 in(2)
    • 1.024 in(8)
    • 1.125 in(2)
    • 1.25 in(5)
    • 1.26 in(7)
    • 1.496 in(3)
    • 1.5 in(7)
    • 1.772 in(1)
    • 2.0 in(2)
    • 2.25 in(5)
    • 3.0 in(2)
    • 4.0 in(1)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.119 in(7)
    • 0.157 in(3)
    • 0.197 in(3)
    • 0.237 in(1)
    • 0.276 in(3)
    • 0.315 in(3)
    • 0.354 in(2)
    • 0.374 in(1)
    • 0.375 in(2)
    • 0.394 in(3)
    • 0.433 in(3)
    • 0.438 in(1)
    • 0.473 in(5)
    • 0.5 in(5)
    • 0.512 in(4)
    • 0.551 in(4)
    • 0.625 in(4)
    • 0.63 in(3)
    • 0.748 in(4)
    • 0.75 in(3)
    • 0.787 in(1)
    • 0.814 in(1)
    • 0.866 in(7)
    • 0.875 in(3)
    • 0.984 in(1)
    • 1.0 in(2)
    • 1.024 in(8)
    • 1.125 in(2)
    • 1.25 in(5)
    • 1.26 in(5)
    • 1.379 in(2)
    • 1.496 in(3)
    • 1.5 in(7)
    • 1.575 in(2)
    • 1.772 in(1)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.25 in(5)
    • 2.362 in(2)
    • 3.0 in(2)
    • 4.0 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 3.0 mm(7)
    • 4.0 mm(3)
    • 5.0 mm(3)
    • 6.0 mm(1)
    • 7.0 mm(3)
    • 8.0 mm(3)
    • 9.0 mm(2)
    • 9.5 mm(1)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 11.0 mm(3)
    • 11.125 mm(1)
    • 12.0 mm(5)
    • 12.701 mm(5)
    • 13.0 mm(4)
    • 14.0 mm(4)
    • 15.875 mm(4)
    • 16.0 mm(3)
    • 19.0 mm(4)
    • 19.05 mm(3)
    • 20.0 mm(1)
    • 20.651 mm(1)
    • 22.0 mm(7)
    • 22.225 mm(3)
    • 25.0 mm(1)
    • 25.401 mm(2)
    • 26.0 mm(8)
    • 28.576 mm(2)
    • 31.75 mm(5)
    • 32.0 mm(5)
    • 35.0 mm(2)
    • 38.0 mm(3)
    • 38.1 mm(7)
    • 40.0 mm(2)
    • 45.0 mm(1)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 57.151 mm(5)
    • 60.0 mm(2)
    • 76.2 mm(2)
    • 101.601 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (135)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (82)
    • Weldon (54)
    Number of Flutes
    Number of Flutes
    • 2 (14)
    • 3 (58)
    • 4 (2)
    • 5 (16)
    • 6 (42)
    • 8 (4)
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(2)
    • 1.969 in(19)
    • 2.0 in(8)
    • 2.126 in(8)
    • 2.244 in(12)
    • 2.283 in(5)
    • 2.48 in(5)
    • 2.5 in(8)
    • 2.598 in(3)
    • 2.835 in(4)
    • 2.874 in(3)
    • 2.992 in(4)
    • 3.0 in(6)
    • 3.228 in(1)
    • 3.269 in(8)
    • 3.5 in(3)
    • 3.504 in(1)
    • 3.622 in(6)
    • 3.938 in(4)
    • 4.0 in(8)
    • 4.094 in(3)
    • 4.5 in(2)
    • 4.764 in(1)
    • 4.921 in(2)
    • 5.0 in(5)
    • 5.25 in(1)
    • 5.5 in(1)
    • 5.906 in(2)
    • 6.5 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(2)
    • 50.0 mm(19)
    • 50.801 mm(8)
    • 54.0 mm(8)
    • 57.0 mm(12)
    • 58.0 mm(5)
    • 63.0 mm(5)
    • 63.5 mm(8)
    • 66.0 mm(3)
    • 72.0 mm(4)
    • 73.0 mm(3)
    • 76.0 mm(4)
    • 76.2 mm(6)
    • 82.0 mm(1)
    • 83.0 mm(8)
    • 88.9 mm(3)
    • 89.0 mm(1)
    • 92.0 mm(6)
    • 100.0 mm(4)
    • 101.601 mm(8)
    • 104.0 mm(3)
    • 114.301 mm(2)
    • 121.0 mm(1)
    • 125.0 mm(2)
    • 127.0 mm(5)
    • 133.35 mm(1)
    • 139.701 mm(1)
    • 150.0 mm(2)
    • 165.101 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (14)
    • CHAMFER (8)
    • RADIUS (12)
    • SQUARE END (102)
    Corner Radius
    Corner Radius
    • 0.0 in(110)
    • 0.01 in(4)
    • 0.019 in(6)
    • 0.02 in(1)
    • 0.03 in(3)
    • 0.039 in(1)
    • 0.06 in(1)
    • 0.079 in(1)
    • 0.098 in(1)
    • 0.119 in(1)
    • 0.157 in(1)
    • 0.197 in(2)
    • 0.237 in(2)
    • 0.315 in(2)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(110)
    • 0.25 mm(4)
    • 0.45 mm(6)
    • 0.5 mm(1)
    • 0.75 mm(3)
    • 1.0 mm(1)
    • 1.5 mm(1)
    • 2.0 mm(1)
    • 2.5 mm(1)
    • 3.0 mm(1)
    • 4.0 mm(1)
    • 5.0 mm(2)
    • 6.0 mm(2)
    • 8.0 mm(2)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(128)
    • 0.1 mm(5)
    • 0.2 mm(1)
    • 0.301 mm(2)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(128)
    • 0.004 in(5)
    • 0.008 in(1)
    • 0.012 in(2)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TIALN (36)
    • TIALN-LW (6)
    • TICN-CT (5)
    • UNCOATED (4)
    • WP15PE (85)
    Rough Finish
    Rough Finish
    • F (109)
    • FR (27)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.222 in(1)
    • 0.296 in(1)
    • 0.37 in(1)
    • 0.374 in(1)
    • 0.444 in(1)
    • 0.453 in(1)
    • 0.593 in(1)
    • 0.61 in(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 5.65 mm(1)
    • 7.525 mm(1)
    • 9.4 mm(1)
    • 9.5 mm(1)
    • 11.275 mm(1)
    • 11.5 mm(1)
    • 15.05 mm(1)
    • 15.5 mm(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.176 mm(2)
    • 4.0 mm(8)
    • 4.775 mm(2)
    • 6.0 mm(35)
    • 6.351 mm(8)
    • 7.95 mm(2)
    • 8.0 mm(10)
    • 9.525 mm(6)
    • 10.0 mm(10)
    • 12.0 mm(11)
    • 12.701 mm(8)
    • 14.0 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(8)
    • 18.0 mm(1)
    • 19.05 mm(9)
    • 20.0 mm(4)
    • 25.0 mm(1)
    • 25.401 mm(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.125 in(2)
    • 0.157 in(8)
    • 0.188 in(2)
    • 0.237 in(35)
    • 0.25 in(8)
    • 0.313 in(2)
    • 0.315 in(10)
    • 0.375 in(6)
    • 0.394 in(10)
    • 0.473 in(11)
    • 0.5 in(8)
    • 0.551 in(3)
    • 0.625 in(3)
    • 0.63 in(8)
    • 0.709 in(1)
    • 0.75 in(9)
    • 0.787 in(4)
    • 0.984 in(1)
    • 1.0 in(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""

    정삭 공구 • 4503 JJ 시리즈 • 날카로운 인선 • JIS

    (16)정삭 공구 • 4503 JJ 시리즈 • 날카로운 인선 • JIS

    Finishers • Series 4C03 4C43 • Radius • Inch

    (6)Finishers • Series 4C03 4C43 • Radius • Inch

    Finishers • Series 4C05 4C15 • Sharp Edge • Inch

    (16)Finishers • Series 4C05 4C15 • Sharp Edge • Inch

    정삭 공구 • D507 D517 시리즈 • 날카로운 인선 • Metric

    (15)정삭 공구 • D507 D517 시리즈 • 날카로운 인선 • Metric

    Finishers • Series 4S07 • Sharp Edge • Inch

    (7)Finishers • Series 4S07 • Sharp Edge • Inch

    Finishers • Series 4S05 4S07 • Sharp Edge • Inch

    (15)Finishers • Series 4S05 4S07 • Sharp Edge • Inch

    정삭 공구 • D503 D513 시리즈 • 스퀘어 엔드 • Metric

    (23)정삭 공구 • D503 D513 시리즈 • 스퀘어 엔드 • Metric

    Vision Plus™ • D518 시리즈 • 날카로운 인선 • Weldon® • Metric

    (10)Vision Plus™ • D518 시리즈 • 날카로운 인선 • Weldon® • Metric

    정삭 공구 • DC03 시리즈 • 반경 • Metric

    (6)정삭 공구 • DC03 시리즈 • 반경 • Metric

    정삭 공구 • 4001 JJ 시리즈 • 볼 노즈 • JIS

    (14)정삭 공구 • 4001 JJ 시리즈 • 볼 노즈 • JIS

    정삭 공구 • 4603 시리즈 • 날카로운 인선 • Metric

    (7)정삭 공구 • 4603 시리즈 • 날카로운 인선 • Metric

    Finishers • Series 4S0F • Sharp Edge • Inch

    (1)Finishers • Series 4S0F • Sharp Edge • Inch
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?