환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

    다목적 엔드밀

    필터 선택
    필터
    필터
      필터 보기 위치
      Metric
      Inch
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (1722)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1722)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1722)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1722)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1564)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1564)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(831)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(831)
      • M Stainless Steel (1564)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1564)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1564)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(831)
      • K Cast Iron (1564)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1564)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1564)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(836)
      • N Non-Ferrous Materials (775)
        • N1
          Wrought Aluminum (663)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(663)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(441)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (505)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (711)
        • N6
          Carbon, Graphite Composites, CFRP (441)
        • N7
          MMC's (440)
      • S High-Temp Alloys (831)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(831)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(831)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(831)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(831)
      • H Hardened Materials (831)
        • H1
          Hardened Materials 44-48 HRC(831)
        • H2
          Hardened Materials 48-55 HRC(828)
        • H3
          Hardened Materials 56-60 HRC(437)
        • H4
          Hardened Materials >60 HRC(437)
      Select All Star
      • CN (228)
      • DE (311)
      • GB (142)
      • IN (148)
      • SG (206)
      • US (332)
      Applications
      Applications
      • Face MillingFace Milling (1175)
      • PocketPocket (1504)
      • Pocket HelicalPocket Helical (1831)
      • Pocket MillingPocket Milling (1830)
      • Pocket Plunge MillingPocket Plunge Milling (263)
      • Profile MillingProfile Milling (294)
      • RampingRamping (1871)
      • Shoulder Ball NoseShoulder Ball Nose (294)
      • Shoulder MillingShoulder Milling (1852)
      • Shoulder RoughingShoulder Roughing (1064)
      • Shoulder Square EndShoulder Square End (1581)
      • Slot Ball NoseSlot Ball Nose (294)
      • Slot MillingSlot Milling (1197)
      • Slot Square EndSlot Square End (951)
      • Trochoidal MillingTrochoidal Milling (113)
      Cutting Diameter
      Cutting Diameter
      • 0.016 in(2)
      • 0.031 in(8)
      • 0.039 in(7)
      • 0.047 in(2)
      • 0.06 in(7)
      • 0.063 in(17)
      • 0.072 in(1)
      • 0.078 in(7)
      • 0.079 in(26)
      • 0.094 in(20)
      • 0.098 in(16)
      • 0.109 in(5)
      • 0.119 in(59)
      • 0.125 in(45)
      • 0.138 in(13)
      • 0.142 in(3)
      • 0.156 in(10)
      • 0.157 in(83)
      • 0.173 in(2)
      • 0.177 in(19)
      • 0.187 in(4)
      • 0.188 in(45)
      • 0.197 in(83)
      • 0.203 in(2)
      • 0.217 in(14)
      • 0.219 in(8)
      • 0.234 in(2)
      • 0.237 in(105)
      • 0.25 in(66)
      • 0.256 in(2)
      • 0.266 in(2)
      • 0.276 in(25)
      • 0.281 in(5)
      • 0.295 in(2)
      • 0.297 in(1)
      • 0.313 in(55)
      • 0.315 in(100)
      • 0.328 in(1)
      • 0.345 in(4)
      • 0.354 in(13)
      • 0.359 in(1)
      • 0.375 in(72)
      • 0.391 in(1)
      • 0.394 in(101)
      • 0.408 in(3)
      • 0.422 in(1)
      • 0.433 in(2)
      • 0.438 in(23)
      • 0.453 in(1)
      • 0.47 in(3)
      • 0.473 in(121)
      • 0.484 in(1)
      • 0.5 in(107)
      • 0.551 in(61)
      • 0.564 in(19)
      • 0.591 in(2)
      • 0.625 in(73)
      • 0.63 in(106)
      • 0.687 in(2)
      • 0.689 in(1)
      • 0.709 in(43)
      • 0.75 in(83)
      • 0.787 in(93)
      • 0.814 in(1)
      • 0.875 in(27)
      • 0.984 in(2)
      • 1.0 in(69)
      • 1.25 in(2)
      Cutting Diameter Min받는 사람Cutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 0.4 mm(2)
      • 0.8 mm(8)
      • 1.0 mm(7)
      • 1.201 mm(2)
      • 1.5 mm(7)
      • 1.6 mm(17)
      • 1.8 mm(1)
      • 1.975 mm(7)
      • 2.0 mm(26)
      • 2.375 mm(20)
      • 2.5 mm(16)
      • 2.776 mm(5)
      • 3.0 mm(59)
      • 3.176 mm(45)
      • 3.5 mm(13)
      • 3.575 mm(3)
      • 3.975 mm(10)
      • 4.0 mm(83)
      • 4.375 mm(2)
      • 4.5 mm(19)
      • 4.75 mm(4)
      • 4.775 mm(45)
      • 5.0 mm(83)
      • 5.15 mm(2)
      • 5.5 mm(14)
      • 5.551 mm(8)
      • 5.95 mm(2)
      • 6.0 mm(105)
      • 6.351 mm(66)
      • 6.5 mm(2)
      • 6.75 mm(2)
      • 7.0 mm(25)
      • 7.15 mm(5)
      • 7.5 mm(2)
      • 7.551 mm(1)
      • 7.95 mm(55)
      • 8.0 mm(100)
      • 8.326 mm(1)
      • 8.725 mm(4)
      • 9.0 mm(13)
      • 9.125 mm(1)
      • 9.525 mm(72)
      • 9.925 mm(1)
      • 10.0 mm(101)
      • 10.326 mm(3)
      • 10.726 mm(1)
      • 11.0 mm(2)
      • 11.125 mm(23)
      • 11.5 mm(1)
      • 11.9 mm(3)
      • 12.0 mm(121)
      • 12.3 mm(1)
      • 12.701 mm(107)
      • 14.0 mm(61)
      • 14.3 mm(19)
      • 15.0 mm(2)
      • 15.875 mm(73)
      • 16.0 mm(106)
      • 17.45 mm(2)
      • 17.475 mm(1)
      • 18.0 mm(43)
      • 19.05 mm(83)
      • 20.0 mm(93)
      • 20.651 mm(1)
      • 22.225 mm(27)
      • 25.0 mm(2)
      • 25.401 mm(69)
      • 31.75 mm(2)
      Cutting Diameter Min받는 사람Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 0.8 mm(2)
      • 1.0 mm(2)
      • 1.5 mm(2)
      • 1.975 mm(8)
      • 2.0 mm(2)
      • 2.776 mm(3)
      • 3.0 mm(8)
      • 3.176 mm(7)
      • 4.0 mm(30)
      • 4.75 mm(17)
      • 4.775 mm(1)
      • 5.0 mm(24)
      • 6.0 mm(14)
      • 6.301 mm(14)
      • 6.351 mm(11)
      • 7.0 mm(42)
      • 7.95 mm(12)
      • 8.0 mm(53)
      • 9.0 mm(9)
      • 9.5 mm(10)
      • 9.525 mm(24)
      • 10.0 mm(40)
      • 11.0 mm(43)
      • 11.101 mm(2)
      • 12.0 mm(23)
      • 12.701 mm(52)
      • 13.0 mm(68)
      • 14.0 mm(26)
      • 14.3 mm(12)
      • 15.0 mm(6)
      • 15.875 mm(58)
      • 16.0 mm(50)
      • 18.0 mm(12)
      • 19.0 mm(69)
      • 19.05 mm(81)
      • 20.0 mm(43)
      • 20.651 mm(20)
      • 22.0 mm(72)
      • 22.225 mm(24)
      • 24.0 mm(5)
      • 25.0 mm(30)
      • 25.401 mm(80)
      • 26.0 mm(74)
      • 28.0 mm(29)
      • 28.576 mm(26)
      • 30.0 mm(7)
      • 31.0 mm(12)
      • 31.75 mm(81)
      • 32.0 mm(99)
      • 34.926 mm(3)
      • 38.0 mm(60)
      • 38.1 mm(111)
      • 40.0 mm(4)
      • 41.0 mm(8)
      • 41.276 mm(15)
      • 44.45 mm(10)
      • 45.0 mm(30)
      • 46.0 mm(1)
      • 50.0 mm(8)
      • 50.801 mm(33)
      • 51.0 mm(1)
      • 53.975 mm(1)
      • 56.0 mm(23)
      • 57.0 mm(2)
      • 57.151 mm(44)
      • 60.0 mm(2)
      • 63.5 mm(6)
      • 64.0 mm(5)
      • 65.0 mm(1)
      • 75.0 mm(43)
      • 76.2 mm(41)
      • 101.601 mm(21)
      Cutting Length Min받는 사람Cutting Length Max
      Cutting Length
      Cutting Length
      • 0.031 in(2)
      • 0.039 in(2)
      • 0.06 in(2)
      • 0.078 in(8)
      • 0.079 in(2)
      • 0.109 in(3)
      • 0.119 in(8)
      • 0.125 in(7)
      • 0.157 in(30)
      • 0.187 in(17)
      • 0.188 in(1)
      • 0.197 in(24)
      • 0.237 in(14)
      • 0.248 in(14)
      • 0.25 in(11)
      • 0.276 in(42)
      • 0.313 in(12)
      • 0.315 in(53)
      • 0.354 in(9)
      • 0.374 in(10)
      • 0.375 in(24)
      • 0.394 in(40)
      • 0.433 in(43)
      • 0.437 in(2)
      • 0.473 in(23)
      • 0.5 in(52)
      • 0.512 in(68)
      • 0.551 in(26)
      • 0.564 in(12)
      • 0.591 in(6)
      • 0.625 in(58)
      • 0.63 in(50)
      • 0.709 in(12)
      • 0.748 in(69)
      • 0.75 in(81)
      • 0.787 in(43)
      • 0.814 in(20)
      • 0.866 in(72)
      • 0.875 in(24)
      • 0.946 in(5)
      • 0.984 in(30)
      • 1.0 in(80)
      • 1.024 in(74)
      • 1.102 in(29)
      • 1.125 in(26)
      • 1.181 in(7)
      • 1.22 in(12)
      • 1.25 in(81)
      • 1.26 in(99)
      • 1.375 in(3)
      • 1.496 in(60)
      • 1.5 in(111)
      • 1.575 in(4)
      • 1.614 in(8)
      • 1.625 in(15)
      • 1.75 in(10)
      • 1.772 in(30)
      • 1.811 in(1)
      • 1.969 in(8)
      • 2.0 in(33)
      • 2.008 in(1)
      • 2.125 in(1)
      • 2.205 in(23)
      • 2.244 in(2)
      • 2.25 in(44)
      • 2.362 in(2)
      • 2.5 in(6)
      • 2.52 in(5)
      • 2.559 in(1)
      • 2.953 in(43)
      • 3.0 in(41)
      • 4.0 in(21)
      Cutting Length Min받는 사람Cutting Length Max
      Reach
      Reach
      • 0.091 in(1)
      • 0.098 in(2)
      • 0.128 in(2)
      • 0.13 in(1)
      • 0.15 in(2)
      • 0.157 in(6)
      • 0.176 in(3)
      • 0.177 in(1)
      • 0.197 in(6)
      • 0.202 in(2)
      • 0.205 in(1)
      • 0.208 in(2)
      • 0.217 in(1)
      • 0.218 in(2)
      • 0.228 in(4)
      • 0.23 in(2)
      • 0.247 in(2)
      • 0.255 in(1)
      • 0.267 in(1)
      • 0.272 in(8)
      • 0.276 in(7)
      • 0.28 in(1)
      • 0.286 in(1)
      • 0.288 in(1)
      • 0.289 in(2)
      • 0.291 in(7)
      • 0.303 in(1)
      • 0.307 in(3)
      • 0.308 in(2)
      • 0.315 in(11)
      • 0.341 in(4)
      • 0.343 in(2)
      • 0.354 in(3)
      • 0.355 in(2)
      • 0.37 in(1)
      • 0.371 in(2)
      • 0.372 in(1)
      • 0.374 in(3)
      • 0.394 in(3)
      • 0.397 in(5)
      • 0.398 in(1)
      • 0.433 in(20)
      • 0.473 in(1)
      • 0.484 in(1)
      • 0.492 in(3)
      • 0.494 in(4)
      • 0.497 in(2)
      • 0.5 in(1)
      • 0.503 in(3)
      • 0.504 in(2)
      • 0.508 in(1)
      • 0.512 in(10)
      • 0.517 in(1)
      • 0.531 in(3)
      • 0.539 in(5)
      • 0.551 in(1)
      • 0.555 in(2)
      • 0.556 in(2)
      • 0.559 in(4)
      • 0.576 in(3)
      • 0.577 in(1)
      • 0.584 in(3)
      • 0.591 in(10)
      • 0.601 in(2)
      • 0.602 in(2)
      • 0.614 in(3)
      • 0.621 in(3)
      • 0.622 in(4)
      • 0.626 in(1)
      • 0.63 in(11)
      • 0.657 in(2)
      • 0.661 in(1)
      • 0.669 in(3)
      • 0.674 in(1)
      • 0.694 in(4)
      • 0.695 in(2)
      • 0.709 in(9)
      • 0.72 in(1)
      • 0.721 in(2)
      • 0.732 in(6)
      • 0.733 in(1)
      • 0.734 in(1)
      • 0.736 in(1)
      • 0.74 in(2)
      • 0.744 in(1)
      • 0.745 in(1)
      • 0.748 in(7)
      • 0.752 in(1)
      • 0.76 in(2)
      • 0.77 in(1)
      • 0.771 in(1)
      • 0.787 in(5)
      • 0.805 in(3)
      • 0.809 in(2)
      • 0.811 in(2)
      • 0.828 in(9)
      • 0.839 in(2)
      • 0.843 in(1)
      • 0.846 in(1)
      • 0.848 in(1)
      • 0.85 in(1)
      • 0.866 in(8)
      • 0.886 in(1)
      • 0.89 in(2)
      • 0.891 in(1)
      • 0.894 in(1)
      • 0.909 in(1)
      • 0.929 in(4)
      • 0.93 in(5)
      • 0.937 in(1)
      • 0.942 in(2)
      • 0.946 in(2)
      • 0.95 in(2)
      • 0.958 in(2)
      • 0.968 in(1)
      • 0.969 in(1)
      • 0.974 in(1)
      • 0.976 in(1)
      • 0.984 in(6)
      • 1.016 in(1)
      • 1.024 in(12)
      • 1.055 in(2)
      • 1.063 in(11)
      • 1.102 in(4)
      • 1.127 in(3)
      • 1.181 in(3)
      • 1.201 in(1)
      • 1.205 in(1)
      • 1.22 in(2)
      • 1.23 in(1)
      • 1.232 in(1)
      • 1.233 in(1)
      • 1.24 in(1)
      • 1.244 in(1)
      • 1.26 in(26)
      • 1.266 in(1)
      • 1.278 in(1)
      • 1.283 in(1)
      • 1.286 in(1)
      • 1.319 in(1)
      • 1.33 in(1)
      • 1.37 in(1)
      • 1.447 in(1)
      • 1.449 in(1)
      • 1.476 in(1)
      • 1.488 in(1)
      • 1.496 in(24)
      • 1.539 in(2)
      • 1.575 in(12)
      • 1.6 in(2)
      • 1.614 in(2)
      • 1.732 in(9)
      • 1.752 in(1)
      • 1.772 in(5)
      • 1.803 in(1)
      • 1.969 in(4)
      • 1.979 in(1)
      • 2.087 in(5)
      • 2.13 in(1)
      • 2.132 in(1)
      • 2.165 in(4)
      • 2.205 in(5)
      • 2.274 in(1)
      • 2.362 in(1)
      • 2.953 in(12)
      Reach Min받는 사람Reach Max
      Reach
      Reach
      • 2.301 mm(1)
      • 2.5 mm(2)
      • 3.25 mm(2)
      • 3.301 mm(1)
      • 3.801 mm(2)
      • 4.0 mm(6)
      • 4.476 mm(3)
      • 4.5 mm(1)
      • 5.0 mm(6)
      • 5.125 mm(2)
      • 5.176 mm(1)
      • 5.25 mm(2)
      • 5.5 mm(1)
      • 5.525 mm(2)
      • 5.801 mm(4)
      • 5.851 mm(2)
      • 6.275 mm(2)
      • 6.476 mm(1)
      • 6.775 mm(1)
      • 6.9 mm(8)
      • 7.0 mm(7)
      • 7.101 mm(1)
      • 7.25 mm(1)
      • 7.301 mm(1)
      • 7.351 mm(2)
      • 7.4 mm(7)
      • 7.7 mm(1)
      • 7.801 mm(3)
      • 7.825 mm(2)
      • 8.0 mm(11)
      • 8.65 mm(4)
      • 8.701 mm(2)
      • 9.0 mm(3)
      • 9.025 mm(2)
      • 9.4 mm(1)
      • 9.425 mm(2)
      • 9.451 mm(1)
      • 9.5 mm(3)
      • 10.0 mm(3)
      • 10.076 mm(5)
      • 10.101 mm(1)
      • 11.0 mm(20)
      • 12.0 mm(1)
      • 12.3 mm(1)
      • 12.5 mm(3)
      • 12.55 mm(4)
      • 12.625 mm(2)
      • 12.701 mm(1)
      • 12.775 mm(3)
      • 12.8 mm(2)
      • 12.9 mm(1)
      • 13.0 mm(10)
      • 13.125 mm(1)
      • 13.476 mm(2)
      • 13.5 mm(1)
      • 13.701 mm(5)
      • 14.0 mm(1)
      • 14.101 mm(2)
      • 14.125 mm(2)
      • 14.201 mm(4)
      • 14.601 mm(3)
      • 14.625 mm(1)
      • 14.826 mm(3)
      • 15.0 mm(10)
      • 15.275 mm(2)
      • 15.3 mm(2)
      • 15.601 mm(3)
      • 15.775 mm(3)
      • 15.8 mm(4)
      • 15.9 mm(1)
      • 16.0 mm(11)
      • 16.7 mm(2)
      • 16.8 mm(1)
      • 17.0 mm(3)
      • 17.125 mm(1)
      • 17.6 mm(4)
      • 17.625 mm(2)
      • 18.0 mm(9)
      • 18.3 mm(1)
      • 18.325 mm(2)
      • 18.6 mm(6)
      • 18.625 mm(1)
      • 18.651 mm(1)
      • 18.7 mm(1)
      • 18.8 mm(2)
      • 18.901 mm(1)
      • 18.925 mm(1)
      • 19.0 mm(7)
      • 19.1 mm(1)
      • 19.3 mm(2)
      • 19.55 mm(1)
      • 19.576 mm(1)
      • 20.0 mm(5)
      • 20.451 mm(3)
      • 20.55 mm(2)
      • 20.6 mm(2)
      • 21.0 mm(9)
      • 21.3 mm(2)
      • 21.401 mm(1)
      • 21.5 mm(1)
      • 21.55 mm(1)
      • 21.6 mm(1)
      • 22.0 mm(8)
      • 22.5 mm(1)
      • 22.6 mm(2)
      • 22.625 mm(1)
      • 22.701 mm(1)
      • 23.1 mm(1)
      • 23.6 mm(4)
      • 23.625 mm(5)
      • 23.8 mm(1)
      • 23.901 mm(2)
      • 24.0 mm(2)
      • 24.1 mm(2)
      • 24.3 mm(2)
      • 24.576 mm(1)
      • 24.6 mm(1)
      • 24.75 mm(1)
      • 24.8 mm(1)
      • 25.0 mm(6)
      • 25.776 mm(1)
      • 26.0 mm(12)
      • 26.8 mm(2)
      • 27.0 mm(11)
      • 28.0 mm(4)
      • 28.6 mm(3)
      • 30.0 mm(3)
      • 30.5 mm(1)
      • 30.6 mm(1)
      • 31.0 mm(2)
      • 31.25 mm(1)
      • 31.3 mm(1)
      • 31.326 mm(1)
      • 31.5 mm(1)
      • 31.6 mm(1)
      • 32.0 mm(26)
      • 32.15 mm(1)
      • 32.426 mm(1)
      • 32.6 mm(1)
      • 32.676 mm(1)
      • 33.5 mm(1)
      • 33.775 mm(1)
      • 34.801 mm(1)
      • 36.75 mm(1)
      • 36.801 mm(1)
      • 37.5 mm(1)
      • 37.801 mm(1)
      • 38.0 mm(24)
      • 39.1 mm(2)
      • 40.0 mm(12)
      • 40.651 mm(2)
      • 41.0 mm(2)
      • 44.0 mm(9)
      • 44.5 mm(1)
      • 45.0 mm(5)
      • 45.801 mm(1)
      • 50.0 mm(4)
      • 50.276 mm(1)
      • 53.0 mm(5)
      • 54.1 mm(1)
      • 54.125 mm(1)
      • 55.0 mm(4)
      • 56.0 mm(5)
      • 57.75 mm(1)
      • 60.0 mm(1)
      • 75.0 mm(12)
      Reach Min받는 사람Reach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 45.0 (5)
      • 90.0 (1907)
      Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Straight-Cylindrical (1462)
      • Weldon (420)
      • Weldon Short (30)
      Number of Flutes
      Number of Flutes
      • 2 (539)
      • 3 (331)
      • 4 (929)
      • 5 (113)
      Over All Length [L]
      Over All Length [L]
      • 1.496 in(67)
      • 1.5 in(86)
      • 1.693 in(7)
      • 1.969 in(100)
      • 2.0 in(87)
      • 2.126 in(46)
      • 2.136 in(1)
      • 2.165 in(6)
      • 2.244 in(147)
      • 2.25 in(13)
      • 2.283 in(19)
      • 2.48 in(107)
      • 2.5 in(147)
      • 2.598 in(14)
      • 2.638 in(1)
      • 2.75 in(5)
      • 2.835 in(52)
      • 2.874 in(15)
      • 2.953 in(69)
      • 2.992 in(21)
      • 3.0 in(98)
      • 3.228 in(14)
      • 3.25 in(23)
      • 3.269 in(81)
      • 3.307 in(13)
      • 3.426 in(1)
      • 3.5 in(52)
      • 3.504 in(33)
      • 3.622 in(87)
      • 3.938 in(73)
      • 4.0 in(158)
      • 4.094 in(52)
      • 4.125 in(5)
      • 4.331 in(15)
      • 4.5 in(14)
      • 4.764 in(2)
      • 4.921 in(18)
      • 5.0 in(50)
      • 5.906 in(45)
      • 6.0 in(47)
      • 7.0 in(21)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 38.0 mm(67)
      • 38.1 mm(86)
      • 43.0 mm(7)
      • 50.0 mm(100)
      • 50.801 mm(87)
      • 54.0 mm(46)
      • 54.25 mm(1)
      • 55.0 mm(6)
      • 57.0 mm(147)
      • 57.151 mm(13)
      • 58.0 mm(19)
      • 63.0 mm(107)
      • 63.5 mm(147)
      • 66.0 mm(14)
      • 67.0 mm(1)
      • 69.851 mm(5)
      • 72.0 mm(52)
      • 73.0 mm(15)
      • 75.0 mm(69)
      • 76.0 mm(21)
      • 76.2 mm(98)
      • 82.0 mm(14)
      • 82.551 mm(23)
      • 83.0 mm(81)
      • 84.0 mm(13)
      • 87.0 mm(1)
      • 88.9 mm(52)
      • 89.0 mm(33)
      • 92.0 mm(87)
      • 100.0 mm(73)
      • 101.601 mm(158)
      • 104.0 mm(52)
      • 104.775 mm(5)
      • 110.0 mm(15)
      • 114.301 mm(14)
      • 121.0 mm(2)
      • 125.0 mm(18)
      • 127.0 mm(50)
      • 150.0 mm(45)
      • 152.4 mm(47)
      • 177.8 mm(21)
      Over All Length [L] Min받는 사람Over All Length [L] Max
      cornerConfiguration
      Corner Style
      Corner Style
      • BALL NOSE (304)
      • CHAMFER (389)
      • RADIUS (365)
      • SQUARE END (847)
      • TORUS (1)
      Corner Radius
      Corner Radius
      • 0.0 in(1242)
      • 0.008 in(5)
      • 0.01 in(8)
      • 0.015 in(46)
      • 0.016 in(3)
      • 0.02 in(58)
      • 0.024 in(2)
      • 0.03 in(62)
      • 0.031 in(3)
      • 0.039 in(41)
      • 0.045 in(16)
      • 0.047 in(5)
      • 0.049 in(1)
      • 0.055 in(2)
      • 0.06 in(76)
      • 0.063 in(11)
      • 0.069 in(1)
      • 0.07 in(1)
      • 0.078 in(4)
      • 0.079 in(25)
      • 0.087 in(1)
      • 0.09 in(31)
      • 0.094 in(10)
      • 0.098 in(13)
      • 0.101 in(1)
      • 0.109 in(2)
      • 0.117 in(1)
      • 0.119 in(24)
      • 0.12 in(22)
      • 0.125 in(20)
      • 0.133 in(1)
      • 0.138 in(1)
      • 0.142 in(1)
      • 0.156 in(9)
      • 0.157 in(25)
      • 0.173 in(1)
      • 0.188 in(11)
      • 0.197 in(18)
      • 0.203 in(1)
      • 0.219 in(2)
      • 0.237 in(21)
      • 0.25 in(14)
      • 0.276 in(10)
      • 0.281 in(1)
      • 0.313 in(8)
      • 0.315 in(15)
      • 0.354 in(4)
      • 0.375 in(10)
      • 0.394 in(15)
      • 0.438 in(2)
      • 0.5 in(5)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(1242)
      • 0.2 mm(5)
      • 0.25 mm(8)
      • 0.375 mm(46)
      • 0.4 mm(3)
      • 0.5 mm(58)
      • 0.601 mm(2)
      • 0.75 mm(62)
      • 0.8 mm(3)
      • 1.0 mm(41)
      • 1.151 mm(16)
      • 1.201 mm(5)
      • 1.25 mm(1)
      • 1.401 mm(2)
      • 1.5 mm(23)
      • 1.526 mm(53)
      • 1.6 mm(11)
      • 1.75 mm(1)
      • 1.776 mm(1)
      • 1.975 mm(4)
      • 2.0 mm(25)
      • 2.176 mm(1)
      • 2.275 mm(31)
      • 2.375 mm(10)
      • 2.5 mm(13)
      • 2.575 mm(1)
      • 2.776 mm(2)
      • 2.975 mm(1)
      • 3.0 mm(24)
      • 3.051 mm(22)
      • 3.176 mm(20)
      • 3.375 mm(1)
      • 3.5 mm(1)
      • 3.575 mm(1)
      • 3.975 mm(9)
      • 4.0 mm(25)
      • 4.375 mm(1)
      • 4.775 mm(11)
      • 5.0 mm(18)
      • 5.15 mm(1)
      • 5.551 mm(2)
      • 6.0 mm(21)
      • 6.351 mm(14)
      • 7.0 mm(10)
      • 7.15 mm(1)
      • 7.95 mm(8)
      • 8.0 mm(15)
      • 9.0 mm(4)
      • 9.525 mm(10)
      • 10.0 mm(15)
      • 11.125 mm(2)
      • 12.701 mm(5)
      Corner Radius Min받는 사람Corner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(1523)
      • 0.1 mm(100)
      • 0.151 mm(4)
      • 0.2 mm(64)
      • 0.25 mm(4)
      • 0.301 mm(147)
      • 0.351 mm(3)
      • 0.4 mm(21)
      • 0.5 mm(46)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(1523)
      • 0.004 in(100)
      • 0.006 in(4)
      • 0.008 in(64)
      • 0.01 in(4)
      • 0.012 in(147)
      • 0.014 in(3)
      • 0.016 in(21)
      • 0.02 in(46)
      Corner Chamfer Min받는 사람Corner Chamfer Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • ALTIN-MT (8)
      • ALTIN-MW (13)
      • K30F-DCHP (2)
      • TIALN (1170)
      • TIALN-LW (7)
      • TICN-CW (8)
      • UNCOATED (320)
      • WU20PE (384)
      Rough Finish
      Rough Finish
      • F (1908)
      Maximum Ramp Angle
      Maximum Ramp Angle
      • 3.0 (23)
      • 5.0 (152)
      Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
      frontEnd
      Neck Diameter
      Neck Diameter
      • 0.111 in(2)
      • 0.148 in(5)
      • 0.185 in(9)
      • 0.222 in(9)
      • 0.296 in(11)
      • 0.37 in(11)
      • 0.444 in(13)
      • 0.593 in(11)
      • 0.74 in(11)
      • 0.925 in(1)
      Neck Diameter Min받는 사람Neck Diameter Max
      Neck Diameter
      Neck Diameter
      • 2.825 mm(2)
      • 3.75 mm(5)
      • 4.7 mm(9)
      • 5.65 mm(9)
      • 7.525 mm(11)
      • 9.4 mm(11)
      • 11.275 mm(13)
      • 15.05 mm(11)
      • 18.8 mm(11)
      • 23.5 mm(1)
      Neck Diameter Min받는 사람Neck Diameter Max
      Center Cutting
      Center Cutting
      backEnd
      Back-End Diameter
      Back-End Diameter
      • 2.0 mm(1)
      • 3.0 mm(54)
      • 3.176 mm(106)
      • 4.0 mm(43)
      • 4.75 mm(21)
      • 4.775 mm(43)
      • 5.0 mm(32)
      • 6.0 mm(303)
      • 6.351 mm(78)
      • 7.0 mm(2)
      • 7.95 mm(63)
      • 8.0 mm(127)
      • 9.0 mm(5)
      • 9.525 mm(78)
      • 10.0 mm(109)
      • 11.0 mm(2)
      • 11.101 mm(12)
      • 11.125 mm(15)
      • 12.0 mm(121)
      • 12.701 mm(113)
      • 14.0 mm(61)
      • 14.3 mm(17)
      • 15.0 mm(2)
      • 15.875 mm(75)
      • 16.0 mm(106)
      • 18.0 mm(43)
      • 19.05 mm(86)
      • 20.0 mm(93)
      • 22.225 mm(28)
      • 25.0 mm(2)
      • 25.401 mm(69)
      • 31.75 mm(2)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.079 in(1)
      • 0.119 in(54)
      • 0.125 in(106)
      • 0.157 in(43)
      • 0.187 in(21)
      • 0.188 in(43)
      • 0.197 in(32)
      • 0.237 in(303)
      • 0.25 in(78)
      • 0.276 in(2)
      • 0.313 in(63)
      • 0.315 in(127)
      • 0.354 in(5)
      • 0.375 in(78)
      • 0.394 in(109)
      • 0.433 in(2)
      • 0.437 in(12)
      • 0.438 in(15)
      • 0.473 in(121)
      • 0.5 in(113)
      • 0.551 in(61)
      • 0.564 in(17)
      • 0.591 in(2)
      • 0.625 in(75)
      • 0.63 in(106)
      • 0.709 in(43)
      • 0.75 in(86)
      • 0.787 in(93)
      • 0.875 in(28)
      • 0.984 in(2)
      • 1.0 in(69)
      • 1.25 in(2)
      Back-End Diameter Min받는 사람Back-End Diameter Max
      No filters matching ""
      GP
      (1528)

      GP

      WCE
      (384)

      WCE

      내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
      Select the destination where you want to move 받는 사람.
      신제품 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      유효한 이름을 입력하십시오.
      product-image
      Please adjust the following properties from

      ISO 카탈로그 번호

      ANSI 카탈로그 번호

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      대시보드 정보를 보려면 로그인해야 합니다.
      Session expired due to inactivity, please login again
      장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
      항목이 장바구니에 추가되었습니다.
      장바구니 보기

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO 카탈로그 번호등급  

      You are about to leave the Solution building process.

      Are you sure you want to leave?