Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

TopThread™ - Boring Bars

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (40)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(40)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(40)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(40)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(40)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(40)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(40)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(40)
    • M Stainless Steel (40)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(40)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(40)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(40)
    • K Cast Iron (40)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(40)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(40)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(40)
    • N Non-Ferrous Materials (40)
      • N1
        Wrought Aluminum (40)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(40)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(40)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (40)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (40)
      • N6
        Carbon, Graphite Composites, CFRP (40)
      • N7
        MMC's (40)
    • S High-Temp Alloys (40)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(40)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(40)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(40)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(40)
    • H Hardened Materials (39)
      • H1
        Hardened Materials 44-48 HRC(39)
      • H2
        Hardened Materials 48-55 HRC(39)
      • H3
        Hardened Materials 56-60 HRC(36)
      • H4
        Hardened Materials >60 HRC(36)
    Select All Star
    • DE (2)
    • IN (2)
    • US (14)
    Applications
    Applications
    • GroovingGrooving (3)
    • ID GroovingID Grooving (37)
    • ID Thread TurningID Thread Turning (40)
    • ThreadingThreading (1)
    Type of Thread
    Type of Thread
    • 60 (39)
    • ACME (19)
    • API RD (13)
    • BSW (6)
    • BUTTRESS (7)
    • STUB ACME (13)
    • UN (31)
    • UNJ (6)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (34)
    • Lightly Interrupted Cut (34)
    • Smooth Cut (39)
    • Varying Depth of Cut (34)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (39)
    • 2.0 (35)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 4.921 in(1)
    • 5.906 in(5)
    • 6.0 in(1)
    • 7.087 in(2)
    • 7.875 in(4)
    • 8.0 in(3)
    • 9.843 in(2)
    • 10.0 in(5)
    • 11.811 in(3)
    • 12.0 in(4)
    • 13.781 in(1)
    • 14.0 in(6)
    • 16.0 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 125.0 mm(1)
    • 150.0 mm(5)
    • 152.4 mm(1)
    • 180.0 mm(2)
    • 200.0 mm(4)
    • 203.201 mm(3)
    • 250.0 mm(2)
    • 254.0 mm(5)
    • 300.0 mm(3)
    • 304.8 mm(4)
    • 350.0 mm(1)
    • 355.6 mm(6)
    • 406.401 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(26)
    • 0.004 in(23)
    • 0.006 in(2)
    • 0.007 in(26)
    • 0.008 in(39)
    • 0.01 in(14)
    • 0.012 in(6)
    • 0.014 in(18)
    • 0.016 in(13)
    • 0.02 in(16)
    • 0.023 in(18)
    • 0.03 in(16)
    • 0.031 in(29)
    • 0.039 in(29)
    • 0.047 in(29)
    • 0.049 in(29)
    • 0.06 in(29)
    • 0.062 in(13)
    • 0.063 in(18)
    • 0.069 in(29)
    • 0.078 in(13)
    • 0.079 in(18)
    • 0.089 in(18)
    • 0.095 in(18)
    • 0.098 in(5)
    • 0.125 in(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(26)
    • 0.1 mm(23)
    • 0.151 mm(2)
    • 0.176 mm(26)
    • 0.2 mm(39)
    • 0.225 mm(6)
    • 0.25 mm(14)
    • 0.301 mm(6)
    • 0.325 mm(18)
    • 0.351 mm(13)
    • 0.4 mm(13)
    • 0.5 mm(16)
    • 0.576 mm(18)
    • 0.75 mm(16)
    • 0.775 mm(29)
    • 1.0 mm(29)
    • 1.201 mm(29)
    • 1.25 mm(29)
    • 1.5 mm(29)
    • 1.576 mm(13)
    • 1.6 mm(18)
    • 1.75 mm(29)
    • 1.975 mm(13)
    • 2.0 mm(18)
    • 2.25 mm(18)
    • 2.401 mm(18)
    • 2.5 mm(5)
    • 3.176 mm(5)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (29)
    • TN10P (24)
    • TN6010 (39)
    • TN6025 (40)
    • TN7110 (34)
    • WU10HT (6)
    • WU10PT (13)
    • WU25PT (7)
    Hand Of Tool
    Hand Of Tool
    • L (16)
    • R (24)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 10.3 mm(1)
    • 11.0 mm(4)
    • 11.101 mm(2)
    • 12.701 mm(2)
    • 13.0 mm(2)
    • 14.275 mm(2)
    • 17.0 mm(4)
    • 17.475 mm(4)
    • 22.0 mm(2)
    • 22.225 mm(2)
    • 25.401 mm(2)
    • 27.0 mm(3)
    • 31.75 mm(3)
    • 34.926 mm(2)
    • 35.0 mm(1)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.406 in(1)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.5 in(2)
    • 0.512 in(2)
    • 0.562 in(2)
    • 0.669 in(4)
    • 0.689 in(4)
    • 0.866 in(2)
    • 0.875 in(2)
    • 1.0 in(2)
    • 1.063 in(3)
    • 1.25 in(3)
    • 1.375 in(2)
    • 1.379 in(1)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 18.5 mm(2)
    • 18.55 mm(2)
    • 20.326 mm(1)
    • 22.0 mm(2)
    • 25.401 mm(2)
    • 26.0 mm(2)
    • 28.576 mm(2)
    • 34.0 mm(4)
    • 34.926 mm(4)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 50.801 mm(2)
    • 54.0 mm(3)
    • 63.5 mm(3)
    • 69.851 mm(2)
    • 70.0 mm(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(2)
    • 0.73 in(2)
    • 0.8 in(1)
    • 0.866 in(2)
    • 1.0 in(2)
    • 1.024 in(2)
    • 1.125 in(2)
    • 1.339 in(4)
    • 1.375 in(4)
    • 1.732 in(2)
    • 1.75 in(2)
    • 2.0 in(2)
    • 2.126 in(3)
    • 2.5 in(3)
    • 2.75 in(2)
    • 2.757 in(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(39)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(39)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.891 in(2)
    • 2.0 in(2)
    • 2.5 in(3)
    • 2.52 in(2)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(4)
    • 4.0 in(4)
    • 5.0 in(2)
    • 5.039 in(2)
    • 6.0 in(2)
    • 6.299 in(3)
    • 7.0 in(2)
    • 7.875 in(1)
    • 8.0 in(3)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 32.775 mm(1)
    • 38.1 mm(1)
    • 48.0 mm(2)
    • 50.801 mm(2)
    • 63.5 mm(3)
    • 64.0 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(4)
    • 101.601 mm(4)
    • 127.0 mm(2)
    • 128.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(3)
    • 177.8 mm(2)
    • 200.0 mm(1)
    • 203.201 mm(3)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.02 in(16)
    • 0.031 in(16)
    • 0.039 in(29)
    • 0.041 in(8)
    • 0.047 in(34)
    • 0.055 in(16)
    • 0.058 in(16)
    • 0.06 in(29)
    • 0.062 in(34)
    • 0.067 in(16)
    • 0.069 in(29)
    • 0.073 in(13)
    • 0.077 in(16)
    • 0.078 in(13)
    • 0.079 in(29)
    • 0.088 in(29)
    • 0.089 in(23)
    • 0.094 in(6)
    • 0.095 in(34)
    • 0.098 in(29)
    • 0.108 in(29)
    • 0.119 in(34)
    • 0.125 in(34)
    • 0.126 in(13)
    • 0.128 in(29)
    • 0.138 in(34)
    • 0.147 in(8)
    • 0.152 in(16)
    • 0.156 in(13)
    • 0.157 in(18)
    • 0.167 in(13)
    • 0.177 in(18)
    • 0.188 in(15)
    • 0.189 in(18)
    • 0.192 in(6)
    • 0.195 in(6)
    • 0.196 in(13)
    • 0.197 in(5)
    • 0.217 in(5)
    • 0.237 in(5)
    • 0.25 in(5)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(16)
    • 0.775 mm(16)
    • 0.8 mm(16)
    • 1.0 mm(29)
    • 1.05 mm(8)
    • 1.201 mm(34)
    • 1.401 mm(16)
    • 1.475 mm(16)
    • 1.5 mm(29)
    • 1.576 mm(34)
    • 1.701 mm(16)
    • 1.75 mm(29)
    • 1.826 mm(13)
    • 1.951 mm(16)
    • 1.975 mm(13)
    • 2.0 mm(29)
    • 2.2 mm(29)
    • 2.225 mm(6)
    • 2.25 mm(23)
    • 2.375 mm(6)
    • 2.401 mm(34)
    • 2.5 mm(29)
    • 2.75 mm(29)
    • 3.0 mm(34)
    • 3.176 mm(34)
    • 3.2 mm(13)
    • 3.25 mm(29)
    • 3.5 mm(34)
    • 3.725 mm(8)
    • 3.85 mm(16)
    • 3.95 mm(13)
    • 3.975 mm(6)
    • 4.0 mm(18)
    • 4.25 mm(13)
    • 4.5 mm(18)
    • 4.775 mm(15)
    • 4.801 mm(18)
    • 4.875 mm(6)
    • 4.95 mm(6)
    • 4.976 mm(13)
    • 5.0 mm(5)
    • 5.5 mm(5)
    • 6.0 mm(5)
    • 6.351 mm(5)
    Cutting Width MinkomuCutting Width Max
    Insert Size
    Insert Size
    • 1 (5)
    • 2 (16)
    • 3 (13)
    • 4 (5)
    • 6 (1)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.067 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.701 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.701 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(3)
    • 44.45 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(3)
    • 0.5 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(3)
    • 1.75 in(2)
    • 1.969 in(1)
    • 2.0 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    A-NNT
    (19)

    A-NNT

    Integrální pro vnitřní průměry Závitovací vyvrtávací tyče • A-NNT • Metrické
    (16)

    Integrální pro vnitřní průměry Závitovací vyvrtávací tyče • A-NNT • Metrické

    A-NNT
    (3)

    A-NNT

    Integrální pro vnitřní průměry Závitovací vyvrtávací tyče • A-NNT-1 • Metrické
    (2)

    Integrální pro vnitřní průměry Závitovací vyvrtávací tyče • A-NNT-1 • Metrické

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk