Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Řada M95

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (20)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(20)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(20)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(18)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(18)
      • M Stainless Steel (18)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(18)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(18)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(18)
      • K Cast Iron (18)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(18)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(18)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(18)
      • N Non-Ferrous Materials (5)
        • N1
          Wrought Aluminum (5)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(5)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(5)
      • S High-Temp Alloys (18)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(18)
      Applications
      Applications
      • Slot MillingSlot Milling (14)
      • Slot SideSlot Side (14)
      Cutting Diameter
      Cutting Diameter
      • 3.938 in(4)
      • 4.921 in(4)
      • 6.299 in(4)
      • 7.875 in(2)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 100.0 mm(4)
      • 125.0 mm(4)
      • 160.0 mm(4)
      • 200.0 mm(2)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Length
      Cutting Length
      • 4.0 mm(2)
      • 6.0 mm(2)
      • 7.0 mm(3)
      • 8.0 mm(4)
      • 10.0 mm(3)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.157 in(2)
      • 0.237 in(2)
      • 0.276 in(3)
      • 0.315 in(4)
      • 0.394 in(3)
      Cutting Length MinkomuCutting Length Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (14)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • 2 Key & Cutter Retention Screw (14)
      Number of Flutes
      Number of Flutes
      • 3 (2)
      • 4 (2)
      • 5 (3)
      • 6 (4)
      • 8 (1)
      • 9 (2)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 4.0 (25)
      Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.0 in(25)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(25)
      Corner Radius MinkomuCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.151 mm(25)
      Corner Chamfer MinkomuCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.006 in(25)
      Corner Chamfer MinkomuCorner Chamfer Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM (14)
      • TN5515 (3)
      • TN7525 (12)
      • TTM09 (14)
      • TTR (12)
      • WK15CM (13)
      • WP35CM (16)
      • WP40PM (16)
      Hand Of Tool
      Hand Of Tool
      • N (14)
      Wiper Insert
      Wiper Insert
      • N (13)
      frontEnd
      Cutting Width
      Cutting Width
      • 0.157 in(2)
      • 0.237 in(2)
      • 0.276 in(3)
      • 0.315 in(4)
      • 0.394 in(3)
      Cutting Width MinkomuCutting Width Max
      Cutting Width
      Cutting Width
      • 4.0 mm(2)
      • 6.0 mm(2)
      • 7.0 mm(3)
      • 8.0 mm(4)
      • 10.0 mm(3)
      Cutting Width MinkomuCutting Width Max
      Insert Shape
      Insert Shape
      • S-SQUARE ON EDGE 90 (25)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.984 in(4)
      • 1.28 in(4)
      • 1.772 in(4)
      • 2.48 in(2)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 25.0 mm(4)
      • 32.5 mm(4)
      • 45.0 mm(4)
      • 63.0 mm(2)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      insertGeometry
      Shape
      Shape
      • S-SQUARE ON EDGE 90 (13)
      Insert IC Size
      Insert IC Size
      • 11.0 mm(5)
      • 12.701 mm(8)
      Insert IC Size MinkomuInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.433 in(5)
      • 0.5 in(8)
      Insert IC Size MinkomuInsert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 11.0 mm(5)
      • 12.701 mm(8)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.433 in(5)
      • 0.5 in(8)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Tool Material
      Cutting Tool Material
      • H W (13)
      Tolerance Class
      Tolerance Class
      • H (13)
      backEnd
      Connection Type
      Connection Type
      • ARBOR (14)
      Back-End Diameter
      Back-End Diameter
      • 27.0 mm(4)
      • 40.0 mm(8)
      • 50.0 mm(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 1.063 in(4)
      • 1.575 in(8)
      • 1.969 in(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      Těla nástrojů
      (14)

      Těla nástrojů

      Břitové destičky
      (13)

      Břitové destičky

      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?