Řada M900

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (47)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(47)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(47)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(47)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(47)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(47)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(46)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(46)
    • M Stainless Steel (46)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(46)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(46)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(46)
    • K Cast Iron (44)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(44)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(44)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(44)
    • N Non-Ferrous Materials (38)
      • N1
        Wrought Aluminum (38)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(38)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(38)
    • S High-Temp Alloys (46)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(46)
    • H Hardened Materials (40)
      • H1
        Hardened Materials 44-48 HRC(40)
    Applications
    Applications
    • Shoulder MillingShoulder Milling (36)
    • Shoulder Square EndShoulder Square End (36)
    • Slot MillingSlot Milling (38)
    • Slot SideSlot Side (38)
    Cutting Diameter
    Cutting Diameter
    • 3.938 in(4)
    • 4.921 in(6)
    • 6.299 in(6)
    • 7.875 in(10)
    • 9.843 in(6)
    • 12.403 in(6)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 100.0 mm(4)
    • 125.0 mm(6)
    • 160.0 mm(6)
    • 200.0 mm(10)
    • 250.0 mm(6)
    • 315.0 mm(6)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 12.0 mm(8)
    • 14.0 mm(8)
    • 16.0 mm(10)
    • 17.5 mm(6)
    • 20.0 mm(6)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.473 in(8)
    • 0.551 in(8)
    • 0.63 in(10)
    • 0.69 in(6)
    • 0.787 in(6)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.732 in(3)
    • 1.762 in(1)
    • 1.811 in(1)
    • 1.969 in(2)
    • 2.037 in(2)
    • 2.087 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 44.0 mm(3)
    • 44.75 mm(1)
    • 46.0 mm(1)
    • 50.0 mm(2)
    • 51.75 mm(2)
    • 53.0 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (38)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (27)
    • C-Bolt Circle (6)
    • SHCS or RetScrw Or BoltCircle (5)
    Number of Flutes
    Number of Flutes
    • 10 (6)
    • 12 (5)
    • 16 (3)
    • 20 (3)
    • 3 (2)
    • 4 (3)
    • 5 (3)
    • 6 (7)
    • 8 (6)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.732 in(3)
    • 1.762 in(1)
    • 1.811 in(1)
    • 1.969 in(2)
    • 2.037 in(2)
    • 2.087 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 44.0 mm(3)
    • 44.75 mm(1)
    • 46.0 mm(1)
    • 50.0 mm(2)
    • 51.75 mm(2)
    • 53.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (38)
    • TN450 (38)
    • TN5515 (38)
    • TN7525 (38)
    • TN7535 (38)
    • TTM (12)
    • TTM08 (27)
    • TTR (38)
    • WK15CM (40)
    • WP25PM (40)
    • WP35CM (40)
    • WP40PM (40)
    • WU35PM (40)
    Hand Of Tool
    Hand Of Tool
    • N (38)
    Wiper Insert
    Wiper Insert
    • N (11)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.473 in(8)
    • 0.551 in(8)
    • 0.63 in(10)
    • 0.69 in(6)
    • 0.787 in(6)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 12.0 mm(8)
    • 14.0 mm(8)
    • 16.0 mm(10)
    • 17.5 mm(6)
    • 20.0 mm(6)
    Cutting Width MinkomuCutting Width Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.906 in(4)
    • 1.181 in(6)
    • 1.655 in(6)
    • 1.891 in(10)
    • 2.087 in(6)
    • 3.386 in(6)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 23.0 mm(4)
    • 30.0 mm(6)
    • 42.0 mm(6)
    • 48.0 mm(10)
    • 53.0 mm(6)
    • 86.0 mm(6)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • M-DIAMOND/RHOMBIC 86 (11)
    Insert IC Size
    Insert IC Size
    • 9.525 mm(6)
    • 12.701 mm(5)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.375 in(6)
    • 0.5 in(5)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 9.55 mm(6)
    • 12.726 mm(5)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.376 in(6)
    • 0.501 in(5)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (11)
    Tolerance Class
    Tolerance Class
    • H (11)
    backEnd
    Connection Type
    Connection Type
    • ARBOR (27)
    • SHELL MILL (11)
    Back-End Diameter
    Back-End Diameter
    • 27.0 mm(2)
    • 32.0 mm(5)
    • 40.0 mm(14)
    • 50.0 mm(8)
    • 60.0 mm(9)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.063 in(2)
    • 1.26 in(5)
    • 1.575 in(14)
    • 1.969 in(8)
    • 2.362 in(9)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)