Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Cast Iron Powerhouse

    The M4070 heavy duty face mill has powerful features trusted to continuously perform in demanding machining conditions while running at high cutting parameters on uneven, non-uniform surfaces. The M4070 is equipped with hardened anvils and tangentially-mounted inserts to power through forged and cast surfaces with uneven stock.

    • Positive cutting edge geometry to enable smooth cutting
    • Tangential design with an M6 insert clamping screw for secure insert seating and predictable performance in high depth of cut (DOC) applications
    • Hardened anvils for extended tool body life
    • Enlarged chip gash design for clean chip evacuation

     

    -MH Inserts are Offered in Two Grades: WK15CM and WP35CM

    • WK15CM: WK15CM is a wear resistant grade with a balanced toughness for general milling of cast irons. This grade achieves the best results in dry machining but can also be used in wet conditions.
    • WP35CM: WP35CM is a general grade with a wide range of applications in the milling of steels and cast irons. This grade also performs best in dry machining but can be used in wet conditions.
    M4070 Series Insert (ISO Catalog # LNGU201012SNMH | MM # 6852418)
    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (10)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
      • M Stainless Steel (10)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
      • K Cast Iron (11)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(11)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(11)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(11)
      • S High-Temp Alloys (10)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
      Select All Star
      • DE (7)
      • IN (7)
      Applications
      Applications
      • Face MillingFace Milling (9)
      Cutting Diameter
      Cutting Diameter
      • 4.921 in(1)
      • 6.0 in(1)
      • 6.299 in(1)
      • 7.875 in(1)
      • 8.0 in(1)
      • 9.843 in(1)
      • 10.0 in(1)
      • 12.0 in(1)
      • 12.403 in(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 125.0 mm(1)
      • 152.4 mm(1)
      • 160.0 mm(1)
      • 200.0 mm(1)
      • 203.201 mm(1)
      • 250.0 mm(1)
      • 254.0 mm(1)
      • 304.8 mm(1)
      • 315.0 mm(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 137.75 mm(1)
      • 165.15 mm(1)
      • 172.75 mm(1)
      • 212.726 mm(1)
      • 215.925 mm(1)
      • 262.725 mm(1)
      • 266.725 mm(1)
      • 317.526 mm(1)
      • 327.725 mm(1)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 5.423 in(1)
      • 6.502 in(1)
      • 6.801 in(1)
      • 8.375 in(1)
      • 8.501 in(1)
      • 10.344 in(1)
      • 10.501 in(1)
      • 12.501 in(1)
      • 12.903 in(1)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 17.3 mm(9)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.681 in(9)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 0.669 in(3)
      • 2.38 in(3)
      • 2.48 in(2)
      • 3.15 in(1)
      Reach MinkomuReach Max
      Reach
      Reach
      • 17.0 mm(3)
      • 60.45 mm(3)
      • 63.0 mm(2)
      • 80.0 mm(1)
      Reach MinkomuReach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 70.0 (9)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • B-Cutter Retention Screw (2)
      • C-Bolt Circle (7)
      Number of Flutes
      Number of Flutes
      • 10 (2)
      • 12 (2)
      • 15 (2)
      • 6 (1)
      • 8 (2)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 2.38 in(3)
      • 2.48 in(5)
      • 3.15 in(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 60.45 mm(3)
      • 63.0 mm(5)
      • 80.0 mm(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • WK15CM (10)
      • WP35CM (10)
      Hand Of Tool
      Hand Of Tool
      • R (9)
      Wiper Insert
      Wiper Insert
      • N (2)
      frontEnd
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • L-RECTANGLE ON EDGE 90 (2)
      Cutting Edge Length
      Cutting Edge Length
      • 20.0 mm(2)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.787 in(2)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • MH (2)
      Cutting Tool Material
      Cutting Tool Material
      • H W (2)
      Tolerance Class
      Tolerance Class
      • G (2)
      backEnd
      Connection Type
      Connection Type
      • SHELL MILL (9)
      Back-End Diameter
      Back-End Diameter
      • 40.0 mm(2)
      • 50.801 mm(1)
      • 60.0 mm(3)
      • 63.5 mm(3)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 1.575 in(2)
      • 2.0 in(1)
      • 2.362 in(3)
      • 2.5 in(3)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      Těla nástrojů
      (9)

      Těla nástrojů

      Břitové destičky
      (2)

      Břitové destičky

      Where To Buy

      Find an authorized WIDIA distributor near you.

      Search Near Me
      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number Katalogové číslo ISO Karbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk