Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Reliability Where it Matters Most

    The VSM22 shoulder mill will continuously face large-walled, big components in Stainless Steel, Cast Iron and Steel using high depth of cuts while providing free chip flow for a clean work area.

    The VSM22 shoulder mill is built for heavy-duty machining equipped with precision ground inserts featuring .787" (20mm) long cutting edges to face big components with high DOCs. Two insert geometries are available for heavy roughing or general purpose applications.

    Features & Benefits

    • .787" (20mm) long insert cutting edge length, .25" (6,35mm) thick
    • Precision ground insert with a positive rake and helical cutting edge to enable smooth cutting action,
      even in unstable conditions
    • .084" (2,14mm) wiper facet for accurate indexing
    • Through-coolant cutter body
    • Cutters with a chip gash for free chip flow and a clean workpiece
    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (13)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(11)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(13)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(13)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(13)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(13)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(13)
      • M Stainless Steel (13)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(13)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(13)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(13)
      • K Cast Iron (15)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
      • N Non-Ferrous Materials (11)
        • N1
          Wrought Aluminum (11)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(11)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(11)
      • S High-Temp Alloys (13)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(11)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(11)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(11)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(13)
      • H Hardened Materials (11)
        • H1
          Hardened Materials 44-48 HRC(11)
      Select All Star
      • DE (11)
      • IN (12)
      Applications
      Applications
      • Face MillingFace Milling (9)
      • PocketPocket (9)
      • Pocket MillingPocket Milling (9)
      • Pocket Plunge MillingPocket Plunge Milling (9)
      • RampingRamping (9)
      • Shoulder MillingShoulder Milling (9)
      • Shoulder RoughingShoulder Roughing (9)
      • Slot MillingSlot Milling (9)
      • Slot SideSlot Side (9)
      • Slot Square EndSlot Square End (9)
      Cutting Diameter
      Cutting Diameter
      • 1.969 in(1)
      • 2.48 in(1)
      • 3.0 in(1)
      • 3.15 in(1)
      • 3.938 in(1)
      • 4.0 in(1)
      • 4.921 in(1)
      • 6.0 in(1)
      • 6.299 in(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 50.0 mm(1)
      • 63.0 mm(1)
      • 76.2 mm(1)
      • 80.0 mm(1)
      • 100.0 mm(1)
      • 101.601 mm(1)
      • 125.0 mm(1)
      • 152.4 mm(1)
      • 160.0 mm(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Length
      Cutting Length
      • 20.0 mm(9)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.787 in(9)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 1.75 in(1)
      • 1.969 in(4)
      • 2.0 in(1)
      • 2.38 in(1)
      • 2.48 in(2)
      Reach MinkomuReach Max
      Reach
      Reach
      • 44.45 mm(1)
      • 50.0 mm(4)
      • 50.801 mm(1)
      • 60.45 mm(1)
      • 63.0 mm(2)
      Reach MinkomuReach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (9)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (4)
      • B-Cutter Retention Screw (4)
      • C-Bolt Circle (1)
      Number of Flutes
      Number of Flutes
      • 10 (2)
      • 4 (1)
      • 5 (1)
      • 6 (2)
      • 8 (2)
      • 9 (1)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.75 in(1)
      • 1.969 in(4)
      • 2.0 in(1)
      • 2.38 in(1)
      • 2.48 in(2)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 44.45 mm(1)
      • 50.0 mm(4)
      • 50.801 mm(1)
      • 60.45 mm(1)
      • 63.0 mm(2)
      Over All Length [L] MinkomuOver All Length [L] Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • WK15CM (11)
      • WP35CM (11)
      • WU20PM (11)
      Hand Of Tool
      Hand Of Tool
      • R (9)
      Wiper Insert
      Wiper Insert
      • N (6)
      frontEnd
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • X-PARALLELOGRAM 80 (6)
      Chip Breaker CBMD
      Chip Breaker CBMD
      • MH (3)
      • MM (3)
      Cutting Tool Material
      Cutting Tool Material
      • H W (6)
      Tolerance Class
      Tolerance Class
      • H (6)
      backEnd
      Connection Type
      Connection Type
      • SHELL MILL (9)
      Back-End Diameter
      Back-End Diameter
      • 22.0 mm(2)
      • 25.401 mm(1)
      • 27.0 mm(1)
      • 31.75 mm(1)
      • 32.0 mm(1)
      • 40.0 mm(2)
      • 50.801 mm(1)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.866 in(2)
      • 1.0 in(1)
      • 1.063 in(1)
      • 1.25 in(1)
      • 1.26 in(1)
      • 1.575 in(2)
      • 2.0 in(1)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      Těla nástrojů
      (9)

      Těla nástrojů

      Břitové destičky
      (6)

      Břitové destičky

      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number Katalogové číslo ISO Karbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk