Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

Small Hole Boring Bars For Turning

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (208)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(208)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(208)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(208)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(208)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(208)
    • M Stainless Steel (208)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(208)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(208)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(208)
    • K Cast Iron (208)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(208)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(208)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(208)
    • N Non-Ferrous Materials (208)
      • N1
        Wrought Aluminum (208)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(208)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(191)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (112)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (112)
      • N6
        Carbon, Graphite Composites, CFRP (112)
      • N7
        MMC's (78)
    • S High-Temp Alloys (4)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
    • H Hardened Materials (37)
      • H1
        Hardened Materials 44-48 HRC(37)
      • H2
        Hardened Materials 48-55 HRC(37)
      • H3
        Hardened Materials 56-60 HRC(37)
      • H4
        Hardened Materials >60 HRC(37)
    Select All Star
    • IN (1)
    • US (46)
    Applications
    Applications
    • Multiple Direction CuttingMultiple Direction Cutting (169)
    • ProfilingProfiling (38)
    • TRN BoringTRN Boring (181)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (7)
    • Lightly Interrupted Cut (7)
    • Smooth Cut (131)
    • Varying Depth of Cut (131)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (2)
    • 60.0 (3)
    • 90.0 (45)
    • 93.0 (19)
    • 95.0 (140)
    • 97.0 (8)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (215)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (140)
    • 2.0 (87)
    • 3.0 (124)
    • 4.0 (6)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.375 in(2)
    • 2.5 in(25)
    • 2.75 in(12)
    • 2.757 in(3)
    • 2.843 in(1)
    • 3.0 in(14)
    • 3.125 in(1)
    • 3.375 in(4)
    • 3.5 in(6)
    • 3.75 in(10)
    • 3.95 in(3)
    • 3.96 in(2)
    • 3.996 in(2)
    • 4.0 in(37)
    • 4.25 in(5)
    • 4.5 in(2)
    • 4.75 in(2)
    • 4.996 in(1)
    • 5.0 in(9)
    • 5.984 in(1)
    • 5.99 in(2)
    • 6.0 in(44)
    • 6.071 in(1)
    • 7.0 in(4)
    • 8.0 in(9)
    • 10.0 in(9)
    • 12.0 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 60.325 mm(2)
    • 63.5 mm(25)
    • 69.851 mm(12)
    • 70.0 mm(3)
    • 72.2 mm(1)
    • 76.2 mm(14)
    • 79.375 mm(1)
    • 85.726 mm(4)
    • 88.9 mm(6)
    • 95.25 mm(10)
    • 100.325 mm(3)
    • 100.575 mm(2)
    • 101.5 mm(2)
    • 101.601 mm(37)
    • 107.95 mm(5)
    • 114.301 mm(2)
    • 120.65 mm(2)
    • 126.9 mm(1)
    • 127.0 mm(9)
    • 152.0 mm(1)
    • 152.15 mm(2)
    • 152.4 mm(44)
    • 154.201 mm(1)
    • 177.8 mm(4)
    • 203.201 mm(9)
    • 254.0 mm(9)
    • 304.8 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(78)
    • 0.004 in(15)
    • 0.005 in(3)
    • 0.007 in(186)
    • 0.008 in(18)
    • 0.015 in(186)
    • 0.016 in(81)
    • 0.031 in(112)
    • 0.063 in(25)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(78)
    • 0.1 mm(15)
    • 0.125 mm(3)
    • 0.176 mm(186)
    • 0.2 mm(18)
    • 0.375 mm(186)
    • 0.4 mm(81)
    • 0.775 mm(71)
    • 0.8 mm(66)
    • 1.6 mm(25)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • ALO (137)
    • C2 (59)
    • C25 (149)
    • C3 (34)
    • CBN6 (34)
    • CG5 (207)
    • CG55 (11)
    • CG6 (186)
    • CM1 (207)
    • CPD1 (59)
    • TN7 (183)
    • WBH10C (3)
    • WBH10P (3)
    • WBH10U (3)
    • WBH25P (3)
    • WBH30P (3)
    • WDN00U (3)
    • WDN10U (34)
    • WDN25U (81)
    • WK20CT (152)
    • WM15CT (7)
    • WM25CT (7)
    • WP15CT (7)
    • WP25CT (14)
    Hand Of Tool
    Hand Of Tool
    • L (47)
    • R (168)
    Wiper Insert
    Wiper Insert
    • N (211)
    • Y (3)
    F Dimension
    F Dimension
    • 0.576 mm(1)
    • 0.601 mm(1)
    • 1.401 mm(1)
    • 1.776 mm(3)
    • 2.401 mm(8)
    • 2.651 mm(17)
    • 2.825 mm(4)
    • 2.95 mm(8)
    • 2.975 mm(2)
    • 3.026 mm(5)
    • 3.1 mm(5)
    • 3.125 mm(1)
    • 3.176 mm(2)
    • 3.2 mm(10)
    • 3.401 mm(2)
    • 3.426 mm(1)
    • 3.6 mm(1)
    • 3.625 mm(1)
    • 3.676 mm(15)
    • 3.7 mm(3)
    • 3.725 mm(4)
    • 3.85 mm(4)
    • 3.95 mm(15)
    • 4.425 mm(3)
    • 4.7 mm(6)
    • 4.75 mm(14)
    • 4.801 mm(1)
    • 5.351 mm(3)
    • 5.551 mm(2)
    • 5.601 mm(9)
    • 5.65 mm(1)
    • 5.801 mm(5)
    • 6.0 mm(1)
    • 6.551 mm(1)
    • 6.801 mm(1)
    • 6.926 mm(3)
    • 7.075 mm(2)
    • 7.101 mm(1)
    • 7.301 mm(1)
    • 7.525 mm(10)
    • 8.125 mm(2)
    • 8.6 mm(3)
    • 8.65 mm(1)
    • 8.701 mm(1)
    • 8.75 mm(2)
    • 8.9 mm(1)
    • 8.975 mm(4)
    • 9.65 mm(3)
    • 9.976 mm(7)
    • 10.351 mm(2)
    • 11.675 mm(7)
    • 14.851 mm(4)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.023 in(1)
    • 0.024 in(1)
    • 0.055 in(1)
    • 0.07 in(3)
    • 0.095 in(8)
    • 0.105 in(17)
    • 0.111 in(4)
    • 0.116 in(8)
    • 0.117 in(2)
    • 0.12 in(5)
    • 0.122 in(5)
    • 0.123 in(1)
    • 0.125 in(2)
    • 0.126 in(10)
    • 0.134 in(2)
    • 0.135 in(1)
    • 0.143 in(1)
    • 0.144 in(1)
    • 0.145 in(15)
    • 0.146 in(3)
    • 0.147 in(4)
    • 0.152 in(4)
    • 0.156 in(15)
    • 0.175 in(3)
    • 0.185 in(6)
    • 0.187 in(14)
    • 0.189 in(1)
    • 0.211 in(3)
    • 0.219 in(2)
    • 0.221 in(9)
    • 0.222 in(1)
    • 0.228 in(5)
    • 0.237 in(1)
    • 0.258 in(1)
    • 0.268 in(1)
    • 0.273 in(3)
    • 0.279 in(2)
    • 0.28 in(1)
    • 0.288 in(1)
    • 0.296 in(10)
    • 0.32 in(2)
    • 0.339 in(3)
    • 0.341 in(1)
    • 0.343 in(1)
    • 0.345 in(2)
    • 0.351 in(1)
    • 0.353 in(4)
    • 0.38 in(3)
    • 0.393 in(7)
    • 0.409 in(2)
    • 0.46 in(7)
    • 0.585 in(4)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 4.575 mm(8)
    • 5.176 mm(8)
    • 5.275 mm(9)
    • 5.551 mm(4)
    • 5.7 mm(2)
    • 5.775 mm(1)
    • 5.801 mm(7)
    • 5.95 mm(11)
    • 6.2 mm(1)
    • 6.601 mm(2)
    • 6.775 mm(1)
    • 6.976 mm(10)
    • 7.051 mm(3)
    • 7.075 mm(2)
    • 7.101 mm(2)
    • 7.25 mm(17)
    • 7.426 mm(4)
    • 7.525 mm(16)
    • 8.8 mm(3)
    • 9.05 mm(6)
    • 9.1 mm(15)
    • 9.15 mm(1)
    • 9.976 mm(1)
    • 10.0 mm(1)
    • 10.351 mm(1)
    • 10.5 mm(3)
    • 10.675 mm(2)
    • 11.125 mm(13)
    • 11.15 mm(1)
    • 12.226 mm(2)
    • 12.5 mm(1)
    • 12.9 mm(1)
    • 13.15 mm(1)
    • 13.351 mm(2)
    • 13.675 mm(3)
    • 13.851 mm(1)
    • 14.3 mm(10)
    • 15.375 mm(1)
    • 15.4 mm(1)
    • 16.375 mm(3)
    • 16.975 mm(3)
    • 17.026 mm(1)
    • 17.1 mm(2)
    • 17.25 mm(1)
    • 17.276 mm(3)
    • 17.475 mm(1)
    • 18.3 mm(7)
    • 19.05 mm(2)
    • 20.25 mm(2)
    • 21.6 mm(7)
    • 24.6 mm(3)
    • 27.951 mm(4)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.18 in(8)
    • 0.205 in(8)
    • 0.209 in(9)
    • 0.219 in(4)
    • 0.224 in(2)
    • 0.227 in(1)
    • 0.228 in(7)
    • 0.234 in(11)
    • 0.244 in(1)
    • 0.26 in(2)
    • 0.267 in(1)
    • 0.275 in(10)
    • 0.278 in(3)
    • 0.279 in(2)
    • 0.28 in(2)
    • 0.286 in(17)
    • 0.292 in(4)
    • 0.296 in(16)
    • 0.347 in(3)
    • 0.356 in(6)
    • 0.358 in(15)
    • 0.36 in(1)
    • 0.393 in(1)
    • 0.394 in(1)
    • 0.409 in(1)
    • 0.414 in(3)
    • 0.42 in(2)
    • 0.438 in(13)
    • 0.439 in(1)
    • 0.481 in(2)
    • 0.492 in(1)
    • 0.508 in(1)
    • 0.518 in(1)
    • 0.526 in(2)
    • 0.538 in(3)
    • 0.545 in(1)
    • 0.564 in(10)
    • 0.605 in(1)
    • 0.606 in(1)
    • 0.645 in(3)
    • 0.668 in(3)
    • 0.67 in(1)
    • 0.673 in(2)
    • 0.679 in(1)
    • 0.68 in(3)
    • 0.689 in(1)
    • 0.72 in(7)
    • 0.75 in(2)
    • 0.797 in(2)
    • 0.85 in(7)
    • 0.969 in(3)
    • 1.1 in(4)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (145)
    • E (60)
    • P (7)
    • S (3)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (19)
    • NEUTRAL (ZERO) (26)
    • POSITIVE-ZERO (170)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.484 in(1)
    • 0.5 in(10)
    • 0.63 in(2)
    • 0.75 in(14)
    • 0.787 in(3)
    • 0.875 in(5)
    • 0.935 in(3)
    • 0.946 in(4)
    • 1.0 in(20)
    • 1.014 in(1)
    • 1.124 in(4)
    • 1.125 in(13)
    • 1.181 in(2)
    • 1.25 in(19)
    • 1.26 in(1)
    • 1.417 in(5)
    • 1.498 in(4)
    • 1.499 in(4)
    • 1.5 in(21)
    • 1.502 in(3)
    • 1.575 in(1)
    • 1.872 in(1)
    • 1.873 in(6)
    • 1.874 in(1)
    • 1.875 in(6)
    • 1.891 in(4)
    • 2.0 in(10)
    • 2.249 in(6)
    • 2.25 in(2)
    • 2.499 in(3)
    • 2.5 in(4)
    • 2.501 in(4)
    • 2.835 in(1)
    • 3.0 in(14)
    • 3.749 in(6)
    • 3.781 in(1)
    • 4.0 in(1)
    • 4.498 in(3)
    • 4.5 in(1)
    • 6.0 in(3)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 12.3 mm(1)
    • 12.701 mm(10)
    • 16.0 mm(2)
    • 19.05 mm(14)
    • 20.0 mm(3)
    • 22.225 mm(5)
    • 23.75 mm(3)
    • 24.0 mm(4)
    • 25.401 mm(20)
    • 25.725 mm(1)
    • 28.55 mm(4)
    • 28.576 mm(13)
    • 30.0 mm(2)
    • 31.75 mm(19)
    • 32.0 mm(1)
    • 36.0 mm(5)
    • 38.051 mm(4)
    • 38.075 mm(4)
    • 38.1 mm(21)
    • 38.125 mm(3)
    • 40.0 mm(1)
    • 47.551 mm(1)
    • 47.575 mm(6)
    • 47.6 mm(1)
    • 47.625 mm(6)
    • 48.0 mm(4)
    • 50.801 mm(10)
    • 57.125 mm(6)
    • 57.151 mm(2)
    • 63.475 mm(3)
    • 63.5 mm(4)
    • 63.526 mm(4)
    • 72.0 mm(1)
    • 76.2 mm(14)
    • 95.226 mm(6)
    • 96.0 mm(1)
    • 101.601 mm(1)
    • 114.25 mm(3)
    • 114.301 mm(1)
    • 152.4 mm(3)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (97)
    • S (109)
    frontEnd
    Clamp Style
    Clamp Style
    • S (188)
    Cutting Width
    Cutting Width
    • 0.03 in(3)
    • 0.06 in(3)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.75 mm(3)
    • 1.526 mm(3)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (87)
    • T-TRIANGLE 60 (107)
    • THREADING (3)
    • W-TRIGON 80 (19)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.062 in(1)
    • 0.075 in(1)
    • 0.103 in(1)
    • 0.125 in(5)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.576 mm(1)
    • 1.901 mm(1)
    • 2.6 mm(1)
    • 3.176 mm(5)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (3)
    • B L (37)
    • D P (140)
    • H T (183)
    • H W (208)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (215)
    Back-End Diameter
    Back-End Diameter
    • 3.95 mm(3)
    • 4.0 mm(3)
    • 4.75 mm(22)
    • 4.775 mm(1)
    • 5.0 mm(5)
    • 6.0 mm(8)
    • 6.351 mm(17)
    • 7.926 mm(16)
    • 8.0 mm(4)
    • 9.525 mm(25)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.701 mm(52)
    • 15.875 mm(33)
    • 16.0 mm(2)
    • 19.05 mm(13)
    • 25.401 mm(7)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.156 in(3)
    • 0.157 in(3)
    • 0.187 in(22)
    • 0.188 in(1)
    • 0.197 in(5)
    • 0.237 in(8)
    • 0.25 in(17)
    • 0.312 in(16)
    • 0.315 in(4)
    • 0.375 in(25)
    • 0.394 in(3)
    • 0.473 in(3)
    • 0.5 in(52)
    • 0.625 in(33)
    • 0.63 in(2)
    • 0.75 in(13)
    • 1.0 in(7)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    CCGW-F (ST)
    (9)

    CCGW-F (ST)

    CCGW-F (ST)
    (3)

    CCGW-F (ST)

    CCGW-F (ST)
    (6)

    CCGW-F (ST)

    CCGW-F (ST)
    (15)

    CCGW-F (ST)

    QCMI
    (3)

    QCMI

    QSMI
    (4)

    QSMI

    CCGW-F (ST)
    (10)

    CCGW-F (ST)

    CCGW-F (ST)
    (20)

    CCGW-F (ST)

    CCGW-F (ST)
    (14)

    CCGW-F (ST)

    CCGW-F (ST)
    (4)

    CCGW-F (ST)

    CCGW-F (ST)
    (4)

    CCGW-F (ST)

    CCGW-F (ST)
    (3)

    CCGW-F (ST)

    CCGW-F (ST)
    (8)

    CCGW-F (ST)

    CCGW-F (ST)
    (4)

    CCGW-F (ST)

    CCGW-F (ST)
    (13)

    CCGW-F (ST)

    CCGW-F (ST)
    (8)

    CCGW-F (ST)

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?