Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

WMT Integral Toolholders

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (201)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(201)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(201)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(201)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(201)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(201)
    • M Stainless Steel (201)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(201)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(201)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(201)
    • K Cast Iron (201)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(201)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(201)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(201)
    • N Non-Ferrous Materials (201)
      • N1
        Wrought Aluminum (201)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(201)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(201)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (201)
      • N6
        Carbon, Graphite Composites, CFRP (201)
    • S High-Temp Alloys (201)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(201)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(201)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(201)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(201)
    • H Hardened Materials (183)
      • H1
        Hardened Materials 44-48 HRC(183)
      • H2
        Hardened Materials 48-55 HRC(183)
    Select All Star
    • CN (40)
    • DE (73)
    • IN (28)
    • SG (10)
    • US (39)
    Applications
    Applications
    • Cut-OffCut-Off (110)
    • Face GroovingFace Grooving (25)
    • GroovingGrooving (168)
    • ID GroovingID Grooving (30)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (201)
    • Lightly Interrupted Cut (201)
    • Smooth Cut (183)
    • Varying Depth of Cut (183)
    Connection Style
    Connection Style
    • Boring Bar Shank (30)
    • Toolholder (177)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (202)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.938 in(13)
    • 4.5 in(13)
    • 4.921 in(34)
    • 5.0 in(31)
    • 5.5 in(2)
    • 5.513 in(2)
    • 5.906 in(53)
    • 6.0 in(29)
    • 7.875 in(4)
    • 8.0 in(4)
    • 9.843 in(8)
    • 10.0 in(7)
    • 11.811 in(3)
    • 11.817 in(1)
    • 12.0 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 100.0 mm(13)
    • 114.301 mm(13)
    • 125.0 mm(34)
    • 127.0 mm(31)
    • 139.701 mm(2)
    • 140.0 mm(2)
    • 150.0 mm(53)
    • 152.4 mm(29)
    • 200.0 mm(4)
    • 203.201 mm(4)
    • 250.0 mm(8)
    • 254.0 mm(7)
    • 300.0 mm(3)
    • 300.151 mm(1)
    • 304.8 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(54)
    • 0.005 in(17)
    • 0.006 in(52)
    • 0.007 in(68)
    • 0.01 in(108)
    • 0.012 in(131)
    • 0.015 in(17)
    • 0.023 in(23)
    • 0.024 in(131)
    • 0.03 in(131)
    • 0.06 in(57)
    • 0.079 in(23)
    • 0.08 in(23)
    • 0.095 in(28)
    • 0.098 in(28)
    • 0.099 in(28)
    • 0.119 in(23)
    • 0.12 in(23)
    • 0.125 in(23)
    • 0.156 in(12)
    • 0.157 in(12)
    • 0.158 in(12)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(54)
    • 0.125 mm(17)
    • 0.151 mm(52)
    • 0.176 mm(68)
    • 0.225 mm(45)
    • 0.25 mm(108)
    • 0.301 mm(131)
    • 0.375 mm(17)
    • 0.576 mm(23)
    • 0.601 mm(131)
    • 0.75 mm(131)
    • 1.5 mm(57)
    • 1.526 mm(45)
    • 2.0 mm(23)
    • 2.025 mm(23)
    • 2.401 mm(28)
    • 2.5 mm(28)
    • 2.526 mm(28)
    • 3.0 mm(23)
    • 3.026 mm(23)
    • 3.176 mm(23)
    • 3.95 mm(12)
    • 4.0 mm(12)
    • 4.025 mm(12)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TN6026 (1)
    • WP10CT (166)
    • WP25CT (166)
    • WU10HT (96)
    • WU10PT (183)
    • WU25PT (201)
    Hand Of Tool
    Hand Of Tool
    • L (95)
    • R (112)
    Wiper Insert
    Wiper Insert
    • N (202)
    • Y (138)
    F Dimension
    F Dimension
    • 9.525 mm(5)
    • 10.0 mm(4)
    • 11.951 mm(2)
    • 12.0 mm(7)
    • 12.701 mm(8)
    • 15.851 mm(4)
    • 15.875 mm(6)
    • 15.9 mm(1)
    • 15.951 mm(2)
    • 15.976 mm(2)
    • 16.0 mm(14)
    • 19.05 mm(18)
    • 19.151 mm(2)
    • 19.951 mm(2)
    • 20.0 mm(18)
    • 24.951 mm(1)
    • 25.0 mm(42)
    • 25.151 mm(2)
    • 25.401 mm(19)
    • 25.425 mm(1)
    • 25.451 mm(1)
    • 25.5 mm(3)
    • 26.0 mm(8)
    • 29.0 mm(15)
    • 31.75 mm(4)
    • 32.0 mm(9)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.375 in(5)
    • 0.394 in(4)
    • 0.472 in(2)
    • 0.473 in(7)
    • 0.5 in(8)
    • 0.624 in(4)
    • 0.625 in(6)
    • 0.626 in(1)
    • 0.628 in(2)
    • 0.629 in(2)
    • 0.63 in(14)
    • 0.75 in(18)
    • 0.754 in(2)
    • 0.785 in(2)
    • 0.787 in(18)
    • 0.982 in(1)
    • 0.984 in(42)
    • 0.99 in(2)
    • 1.0 in(19)
    • 1.002 in(2)
    • 1.004 in(3)
    • 1.024 in(8)
    • 1.143 in(15)
    • 1.25 in(4)
    • 1.26 in(9)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 32.0 mm(1)
    • 38.0 mm(2)
    • 40.401 mm(4)
    • 41.0 mm(4)
    • 47.0 mm(15)
    • 52.0 mm(4)
    • 54.0 mm(4)
    • 54.1 mm(3)
    • 69.851 mm(2)
    • 70.0 mm(8)
    • 100.0 mm(9)
    • 101.601 mm(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 1.26 in(1)
    • 1.496 in(2)
    • 1.591 in(4)
    • 1.614 in(4)
    • 1.85 in(15)
    • 2.047 in(4)
    • 2.126 in(4)
    • 2.13 in(3)
    • 2.75 in(2)
    • 2.757 in(8)
    • 3.938 in(9)
    • 4.0 in(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(15)
    • 1.024 in(17)
    • 1.062 in(2)
    • 1.125 in(2)
    • 1.25 in(2)
    • 1.26 in(3)
    • 2.047 in(3)
    • 2.757 in(4)
    • 3.938 in(8)
    • 4.0 in(2)
    • 8.0 in(2)
    • 8.071 in(9)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(15)
    • 26.0 mm(17)
    • 26.975 mm(2)
    • 28.576 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 52.0 mm(3)
    • 70.0 mm(4)
    • 100.0 mm(8)
    • 101.601 mm(2)
    • 203.201 mm(2)
    • 205.0 mm(9)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (177)
    • S (30)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (30)
    • NEUTRAL (ZERO) (1)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.969 in(8)
    • 2.52 in(13)
    • 2.535 in(2)
    • 3.15 in(3)
    • 3.307 in(2)
    • 3.323 in(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 50.0 mm(8)
    • 64.0 mm(13)
    • 64.4 mm(2)
    • 80.0 mm(3)
    • 84.0 mm(2)
    • 84.4 mm(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (30)
    frontEnd
    Clamp Style
    Clamp Style
    • C (3)
    • S (4)
    • Y (185)
    Cutting Width
    Cutting Width
    • 0.06 in(18)
    • 0.079 in(36)
    • 0.084 in(35)
    • 0.094 in(17)
    • 0.095 in(17)
    • 0.119 in(45)
    • 0.123 in(45)
    • 0.125 in(45)
    • 0.156 in(23)
    • 0.157 in(23)
    • 0.162 in(23)
    • 0.187 in(28)
    • 0.188 in(28)
    • 0.197 in(28)
    • 0.202 in(28)
    • 0.237 in(23)
    • 0.241 in(23)
    • 0.249 in(23)
    • 0.25 in(23)
    • 0.312 in(12)
    • 0.313 in(12)
    • 0.315 in(12)
    • 0.32 in(12)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 1.5 mm(18)
    • 2.0 mm(36)
    • 2.125 mm(35)
    • 2.375 mm(17)
    • 2.401 mm(17)
    • 3.0 mm(45)
    • 3.125 mm(45)
    • 3.176 mm(45)
    • 3.95 mm(23)
    • 4.0 mm(23)
    • 4.125 mm(23)
    • 4.75 mm(28)
    • 4.775 mm(28)
    • 5.0 mm(28)
    • 5.125 mm(28)
    • 6.0 mm(23)
    • 6.125 mm(23)
    • 6.325 mm(23)
    • 6.351 mm(23)
    • 7.926 mm(12)
    • 7.95 mm(12)
    • 8.0 mm(12)
    • 8.125 mm(12)
    Cutting Width MinkomuCutting Width Max
    Insert Size
    Insert Size
    • 1 (18)
    • 2 (32)
    • 2B (18)
    • 3 (45)
    • 4 (27)
    • 5 (29)
    • 6 (23)
    • 8 (12)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.394 in(15)
    • 0.42 in(3)
    • 0.433 in(11)
    • 0.44 in(8)
    • 0.492 in(1)
    • 0.512 in(19)
    • 0.531 in(2)
    • 0.551 in(12)
    • 0.56 in(9)
    • 0.564 in(2)
    • 0.61 in(2)
    • 0.625 in(5)
    • 0.63 in(15)
    • 0.65 in(16)
    • 0.728 in(2)
    • 0.748 in(20)
    • 0.75 in(10)
    • 0.866 in(19)
    • 0.875 in(8)
    • 0.945 in(5)
    • 0.984 in(12)
    • 1.0 in(11)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 10.0 mm(15)
    • 10.675 mm(3)
    • 11.0 mm(11)
    • 11.175 mm(8)
    • 12.5 mm(1)
    • 13.0 mm(19)
    • 13.5 mm(2)
    • 14.0 mm(12)
    • 14.226 mm(9)
    • 14.3 mm(2)
    • 15.5 mm(2)
    • 15.875 mm(5)
    • 16.0 mm(15)
    • 16.5 mm(16)
    • 18.5 mm(2)
    • 19.0 mm(20)
    • 19.05 mm(10)
    • 22.0 mm(19)
    • 22.225 mm(8)
    • 23.975 mm(5)
    • 25.0 mm(12)
    • 25.401 mm(11)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • H W (202)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (30)
    • SQUARE SHANK (172)
    Back-End Diameter
    Back-End Diameter
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.701 mm(1)
    • 31.75 mm(6)
    • 32.0 mm(8)
    • 38.1 mm(3)
    • 40.0 mm(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.248 in(1)
    • 1.25 in(6)
    • 1.26 in(8)
    • 1.5 in(3)
    • 1.575 in(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(5)
    • 0.394 in(4)
    • 0.473 in(9)
    • 0.5 in(8)
    • 0.625 in(13)
    • 0.63 in(16)
    • 0.75 in(20)
    • 0.787 in(20)
    • 0.978 in(10)
    • 0.984 in(39)
    • 0.99 in(4)
    • 1.0 in(23)
    • 1.25 in(2)
    • 1.26 in(4)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(5)
    • 10.0 mm(4)
    • 12.0 mm(9)
    • 12.701 mm(8)
    • 15.875 mm(13)
    • 16.0 mm(16)
    • 19.05 mm(20)
    • 20.0 mm(20)
    • 24.85 mm(10)
    • 25.0 mm(39)
    • 25.151 mm(4)
    • 25.401 mm(23)
    • 31.75 mm(2)
    • 32.0 mm(4)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.375 in(5)
    • 0.394 in(4)
    • 0.461 in(2)
    • 0.473 in(7)
    • 0.5 in(8)
    • 0.624 in(4)
    • 0.625 in(13)
    • 0.63 in(12)
    • 0.75 in(20)
    • 0.781 in(3)
    • 0.787 in(17)
    • 0.978 in(10)
    • 0.984 in(38)
    • 0.99 in(4)
    • 1.0 in(24)
    • 1.207 in(1)
    • 1.25 in(1)
    • 1.26 in(4)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(5)
    • 10.0 mm(4)
    • 11.701 mm(2)
    • 12.0 mm(7)
    • 12.701 mm(8)
    • 15.851 mm(4)
    • 15.875 mm(13)
    • 16.0 mm(12)
    • 19.05 mm(20)
    • 19.85 mm(3)
    • 20.0 mm(17)
    • 24.85 mm(10)
    • 25.0 mm(38)
    • 25.151 mm(4)
    • 25.401 mm(24)
    • 30.651 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(4)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Integrální držáky nástrojů pro čelní zapichování WMT • Vnější podpěra • Metrické
    (19)

    Integrální držáky nástrojů pro čelní zapichování WMT • Vnější podpěra • Metrické

    Integrální WMT pro vnitřní průměry Zapichovací vyvrtávací tyče • Metrické
    (16)

    Integrální WMT pro vnitřní průměry Zapichovací vyvrtávací tyče • Metrické

    WMT Integral Toolholders • Swiss Style • Inch
    (14)

    WMT Integral Toolholders • Swiss Style • Inch

    Integrální držáky nástrojů WMT pro dlouhotočné automaty • Metrické
    (18)

    Integrální držáky nástrojů WMT pro dlouhotočné automaty • Metrické

    WMT Integral Toolholders • Inch
    (57)

    WMT Integral Toolholders • Inch

    Integrální držáky nástrojů WMT • Metrické
    (60)

    Integrální držáky nástrojů WMT • Metrické

    Integrální držáky nástrojů pro čelní zapichování WMT • Vnitřní podpěra • Metrické
    (5)

    Integrální držáky nástrojů pro čelní zapichování WMT • Vnitřní podpěra • Metrické

    A-A3E
    (14)

    A-A3E

    WMT Integral Toolholders • Face Grooving • Inch
    (1)

    WMT Integral Toolholders • Face Grooving • Inch

    WMT Integral Toolholders • Face Grooving • Inch
    (3)

    WMT Integral Toolholders • Face Grooving • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk