Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    PSC 50 Internal Cutting Units

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (54)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(54)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(54)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(54)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(54)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(54)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(54)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(54)
      • M Stainless Steel (54)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(54)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(54)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(54)
      • K Cast Iron (54)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(54)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(54)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(54)
      • N Non-Ferrous Materials (54)
        • N1
          Wrought Aluminum (54)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(54)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(39)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (54)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (54)
        • N6
          Carbon, Graphite Composites, CFRP (54)
        • N7
          MMC's (46)
      • S High-Temp Alloys (54)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(54)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(54)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(54)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(54)
      • H Hardened Materials (48)
        • H1
          Hardened Materials 44-48 HRC(48)
        • H2
          Hardened Materials 48-55 HRC(48)
        • H3
          Hardened Materials 56-60 HRC(48)
        • H4
          Hardened Materials >60 HRC(40)
      • C CFRP Materials (41)
        • C1
          CFRP, CFRP / CFRP (41)
        • C2
          CFRP / Aluminium CFRP / Non-Ferrous (33)
      Applications
      Applications
      • FacingFacing (41)
      • ID FacingID Facing (41)
      • ID GroovingID Grooving (7)
      • ID Thread TurningID Thread Turning (6)
      • Multiple Direction CuttingMultiple Direction Cutting (41)
      • Plunge TurningPlunge Turning (28)
      • TRN BoringTRN Boring (41)
      • TurningTurning (41)
      Type of Thread
      Type of Thread
      • 55 (6)
      • 60 (13)
      • ACME (11)
      • API (6)
      • API BUTTRESS (1)
      • API RD (9)
      • BSPT (5)
      • BSW (10)
      • BUTTRESS (7)
      • M (12)
      • NPT (9)
      • NPTF (5)
      • RD DIN 405 (6)
      • STUB ACME (10)
      • TR DIN 103 (6)
      • UN (12)
      • UNJ (9)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (48)
      • Lightly Interrupted Cut (48)
      • Smooth Cut (48)
      • Varying Depth of Cut (48)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 75.0 (1)
      • 90.0 (13)
      • 93.0 (13)
      • 95.0 (21)
      • 107.5 (6)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (37)
      • 2.0 (44)
      • 3.0 (7)
      • 4.0 (32)
      • 6.0 (1)
      • 8.0 (15)
      Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
      Over All Length [L]
      Over All Length [L]
      • 2.362 in(3)
      • 2.757 in(5)
      • 3.15 in(5)
      • 3.543 in(17)
      • 3.938 in(3)
      • 4.134 in(1)
      • 4.331 in(7)
      • 5.513 in(8)
      • 5.906 in(5)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 60.0 mm(3)
      • 70.0 mm(5)
      • 80.0 mm(5)
      • 90.0 mm(17)
      • 100.0 mm(3)
      • 105.0 mm(1)
      • 110.0 mm(7)
      • 140.0 mm(8)
      • 150.0 mm(5)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.0 in(6)
      • 0.001 in(11)
      • 0.002 in(23)
      • 0.003 in(12)
      • 0.004 in(45)
      • 0.005 in(4)
      • 0.006 in(10)
      • 0.007 in(7)
      • 0.008 in(43)
      • 0.01 in(7)
      • 0.011 in(4)
      • 0.012 in(5)
      • 0.014 in(10)
      • 0.016 in(45)
      • 0.017 in(1)
      • 0.019 in(5)
      • 0.02 in(6)
      • 0.023 in(5)
      • 0.024 in(1)
      • 0.028 in(3)
      • 0.03 in(2)
      • 0.031 in(47)
      • 0.035 in(5)
      • 0.037 in(4)
      • 0.039 in(6)
      • 0.047 in(46)
      • 0.049 in(6)
      • 0.055 in(1)
      • 0.06 in(6)
      • 0.062 in(14)
      • 0.063 in(32)
      • 0.069 in(6)
      • 0.078 in(4)
      • 0.079 in(5)
      • 0.089 in(5)
      • 0.094 in(2)
      • 0.095 in(8)
      • 0.098 in(1)
      • 0.125 in(1)
      • 0.126 in(2)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(6)
      • 0.025 mm(11)
      • 0.05 mm(23)
      • 0.076 mm(12)
      • 0.1 mm(45)
      • 0.125 mm(4)
      • 0.151 mm(10)
      • 0.176 mm(7)
      • 0.2 mm(43)
      • 0.225 mm(4)
      • 0.25 mm(7)
      • 0.275 mm(4)
      • 0.301 mm(5)
      • 0.325 mm(5)
      • 0.351 mm(10)
      • 0.4 mm(45)
      • 0.426 mm(1)
      • 0.45 mm(5)
      • 0.476 mm(1)
      • 0.5 mm(6)
      • 0.576 mm(5)
      • 0.601 mm(1)
      • 0.701 mm(3)
      • 0.75 mm(2)
      • 0.775 mm(6)
      • 0.8 mm(41)
      • 0.9 mm(5)
      • 0.925 mm(4)
      • 1.0 mm(6)
      • 1.201 mm(46)
      • 1.25 mm(6)
      • 1.401 mm(1)
      • 1.5 mm(6)
      • 1.576 mm(14)
      • 1.6 mm(32)
      • 1.75 mm(6)
      • 1.975 mm(4)
      • 2.0 mm(5)
      • 2.25 mm(5)
      • 2.375 mm(2)
      • 2.401 mm(8)
      • 2.5 mm(1)
      • 3.176 mm(1)
      • 3.2 mm(2)
      Corner Radius MinkomuCorner Radius Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • 13E (18)
      • 241 (10)
      • CL4 (16)
      • CM2 (18)
      • CM3 (16)
      • CM4 (13)
      • CPX (18)
      • CW2 (15)
      • CW2015 (18)
      • CW5025 (19)
      • GH1 (1)
      • GX (11)
      • HCK10 (8)
      • HCK20 (3)
      • HK1500 (30)
      • HK35 (2)
      • HT2 (35)
      • HTX (24)
      • HWK15 (8)
      • K00331 (3)
      • K060 (11)
      • K090 (18)
      • K1 (10)
      • K1010P (1)
      • K10M (27)
      • K10P (21)
      • K10U (31)
      • K15 (6)
      • K15U (31)
      • K20K (20)
      • K21 (11)
      • K25M (33)
      • K25P (26)
      • K2885 (6)
      • K313 (46)
      • K35P (9)
      • K420 (21)
      • K45 (11)
      • K4H (4)
      • K68 (42)
      • KB1340 (17)
      • KB1345 (22)
      • KB1610 (26)
      • KB1625 (18)
      • KB1630 (21)
      • KB5610 (25)
      • KB5625 (29)
      • KB5630 (24)
      • KB9610 (31)
      • KB9640 (18)
      • KBH10 (31)
      • KBH10B (15)
      • KBH20 (32)
      • KBH20B (15)
      • KBK35 (10)
      • KC210 (16)
      • KC250 (19)
      • KC5010 (51)
      • KC5020P (8)
      • KC5025 (52)
      • KC5410 (40)
      • KC5510 (25)
      • KC5525 (22)
      • KC710 (21)
      • KC720 (41)
      • KC722 (20)
      • KC730 (49)
      • KC7310 (27)
      • KC732 (32)
      • KC8050 (41)
      • KC810 (46)
      • KC850 (48)
      • KC9010 (35)
      • KC9025 (41)
      • KC910 (37)
      • KC9105 (39)
      • KC9110 (48)
      • KC9120 (38)
      • KC9125 (41)
      • KC9125RR (1)
      • KC9140 (27)
      • KC9145 (19)
      • KC9210 (5)
      • KC9215 (27)
      • KC9225 (41)
      • KC9240 (41)
      • KC9240NEW (41)
      • KC9245 (27)
      • KC9315 (41)
      • KC9320 (46)
      • KC9325 (32)
      • KC935 (48)
      • KC950 (40)
      • KC990 (35)
      • KCD25 (13)
      • KCK05 (41)
      • KCK05B (38)
      • KCK15 (38)
      • KCK15B (41)
      • KCK20 (44)
      • KCK20B (46)
      • KCM15 (41)
      • KCM15B (41)
      • KCM25 (41)
      • KCM25B (39)
      • KCM25S (8)
      • KCM35 (33)
      • KCM35B (26)
      • KCP05 (39)
      • KCP05B (35)
      • KCP10 (41)
      • KCP10B (48)
      • KCP15 (6)
      • KCP20S (8)
      • KCP25 (41)
      • KCP25B (48)
      • KCP25C (48)
      • KCP30 (41)
      • KCP30B (25)
      • KCP40 (19)
      • KCP40B (27)
      • KCPK05 (25)
      • KCS10 (24)
      • KCS10B (39)
      • KCS25S (8)
      • KCU10 (48)
      • KCU10B (48)
      • KCU25 (46)
      • KCU25B (46)
      • KD050 (25)
      • KD081 (28)
      • KD100 (20)
      • KD120 (16)
      • KD1400 (25)
      • KD1405 (16)
      • KD1425 (29)
      • KM1 (11)
      • KMF (10)
      • KN10S (8)
      • KS15 (10)
      • KT1120 (10)
      • KT125 (17)
      • KT150 (11)
      • KT175 (36)
      • KT315 (46)
      • KT325 (35)
      • KTP10 (37)
      • KTP25S (30)
      • KU10 (14)
      • KU10T (44)
      • KU25T (10)
      • KU30T (46)
      • KY1310 (14)
      • KY1320 (19)
      • KY1540 (11)
      • KY1615 (18)
      • KY2000 (13)
      • KY2100 (11)
      • KY3000 (23)
      • KY3400 (14)
      • KY3500 (19)
      • KY4000 (13)
      • KY4300 (12)
      • KY4400 (19)
      • KYHK15B (19)
      • KYK10 (12)
      • KYK25 (14)
      • KYK35 (19)
      • KYS25 (11)
      • KYS30 (12)
      • NL200 (15)
      • NL250 (25)
      • NL300 (18)
      • NL400 (13)
      • NL920 (23)
      • P25 (17)
      • PB100 (11)
      • PB170 (10)
      • PB250 (11)
      • PB300 (10)
      • PD100 (8)
      • PD50 (2)
      • PS5 (21)
      • SP0819 (18)
      • SP0A00 (1)
      • SP3019 (14)
      • SP4019 (14)
      • SP4066 (2)
      • SP61EJ (1)
      • SPN3W1 (6)
      • THM (31)
      • THM-X (23)
      • THMF-X (11)
      • TN10P (45)
      • TN10U (31)
      • TN15M (35)
      • TN15U (31)
      • TN2000 (30)
      • TN20K (33)
      • TN20P (41)
      • TN30M (41)
      • TN30P (19)
      • TN4000 (29)
      • TN5015 (32)
      • TN5020 (39)
      • TN5105 (30)
      • TN5120 (39)
      • TN6010 (29)
      • TN6025 (37)
      • TN7005 (37)
      • TN7010 (41)
      • TN7015 (41)
      • TN7025 (41)
      • TN7035 (33)
      • TN7105 (36)
      • TN7110 (46)
      • TN7115 (39)
      • TN7125 (39)
      • TN7135 (33)
      • TN8025 (33)
      • TTI15 (34)
      • TTM (6)
      • TTM09 (1)
      • TTR (18)
      • TTS (22)
      • TTX (29)
      • W00342 (2)
      • WBH10C (30)
      • WBH10P (24)
      • WBH10U (26)
      • WBH20P (25)
      • WBH25P (25)
      • WBH25U (24)
      • WBH30P (24)
      • WBK40U (17)
      • WBK45U (22)
      • WDN00U (16)
      • WDN25U (25)
      • WK05CT (33)
      • WK15CT (30)
      • WK20CT (39)
      • WM15CT (39)
      • WM25CT (39)
      • WM35CT (25)
      • WP05CT (11)
      • WP15CT (39)
      • WP20TT (7)
      • WP25CT (39)
      • WP35CT (39)
      • WS10PT (32)
      • WS25PT (32)
      • WU05PT (8)
      • WU10HT (40)
      • WU10PT (37)
      • WU25PT (40)
      • X00511 (10)
      • X00580 (10)
      • X00581 (10)
      • X00582 (10)
      • X00583 (10)
      • X00584 (10)
      • X00585 (10)
      • X00586 (10)
      • X00591 (10)
      • X00592 (10)
      • X00593 (10)
      • X00594 (10)
      • X00596 (10)
      • X00597 (10)
      • X00599 (10)
      Hand Of Tool
      Hand Of Tool
      • L (26)
      • R (28)
      Wiper Insert
      Wiper Insert
      • N (54)
      • Y (30)
      F Dimension
      F Dimension
      • 11.0 mm(4)
      • 12.0 mm(2)
      • 13.0 mm(5)
      • 14.0 mm(1)
      • 17.0 mm(16)
      • 18.0 mm(2)
      • 22.0 mm(8)
      • 27.0 mm(9)
      • 35.0 mm(7)
      F Dimension MinkomuF Dimension Max
      F Dimension
      F Dimension
      • 0.433 in(4)
      • 0.473 in(2)
      • 0.512 in(5)
      • 0.551 in(1)
      • 0.669 in(16)
      • 0.709 in(2)
      • 0.866 in(8)
      • 1.063 in(9)
      • 1.379 in(7)
      F Dimension MinkomuF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 20.0 mm(6)
      • 24.0 mm(1)
      • 25.0 mm(5)
      • 32.0 mm(14)
      • 33.0 mm(3)
      • 33.5 mm(1)
      • 38.5 mm(2)
      • 40.0 mm(6)
      • 48.5 mm(1)
      • 50.0 mm(7)
      • 52.5 mm(1)
      • 63.0 mm(7)
      Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.787 in(6)
      • 0.946 in(1)
      • 0.984 in(5)
      • 1.26 in(14)
      • 1.299 in(3)
      • 1.319 in(1)
      • 1.516 in(2)
      • 1.575 in(6)
      • 1.909 in(1)
      • 1.969 in(7)
      • 2.067 in(1)
      • 2.48 in(7)
      Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 393.661 in(7)
      Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 9999.0 mm(7)
      Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • B (21)
      • E (20)
      • S (13)
      Rake Angle Style
      Rake Angle Style
      • DOUBLE NEGATIVE (33)
      • NEGATIVE-ZERO (14)
      Maximum Bore Depth
      Maximum Bore Depth
      • 1.417 in(3)
      • 1.811 in(3)
      • 1.85 in(2)
      • 2.008 in(1)
      • 2.205 in(4)
      • 2.52 in(3)
      • 2.598 in(5)
      • 2.638 in(10)
      • 3.15 in(1)
      • 3.465 in(6)
      • 3.48 in(1)
      • 3.938 in(2)
      • 4.449 in(2)
      • 4.646 in(2)
      • 4.686 in(4)
      • 5.906 in(5)
      Maximum Bore Depth MinkomuMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 36.0 mm(3)
      • 46.0 mm(3)
      • 47.0 mm(2)
      • 51.0 mm(1)
      • 56.0 mm(4)
      • 64.0 mm(3)
      • 66.0 mm(5)
      • 67.0 mm(10)
      • 80.0 mm(1)
      • 88.0 mm(6)
      • 88.4 mm(1)
      • 100.0 mm(2)
      • 113.0 mm(2)
      • 118.0 mm(2)
      • 119.0 mm(4)
      • 150.0 mm(5)
      Maximum Bore Depth MinkomuMaximum Bore Depth Max
      frontEnd
      Clamp Style
      Clamp Style
      • D (7)
      • N (7)
      • P (20)
      • S (20)
      Cutting Width
      Cutting Width
      • 0.02 in(2)
      • 0.031 in(2)
      • 0.035 in(2)
      • 0.039 in(6)
      • 0.041 in(2)
      • 0.047 in(6)
      • 0.055 in(2)
      • 0.058 in(2)
      • 0.06 in(6)
      • 0.062 in(6)
      • 0.067 in(2)
      • 0.069 in(6)
      • 0.073 in(4)
      • 0.077 in(2)
      • 0.078 in(4)
      • 0.079 in(6)
      • 0.088 in(6)
      • 0.089 in(5)
      • 0.094 in(1)
      • 0.095 in(6)
      • 0.097 in(4)
      • 0.098 in(6)
      • 0.105 in(4)
      • 0.108 in(6)
      • 0.11 in(4)
      • 0.119 in(7)
      • 0.122 in(4)
      • 0.125 in(7)
      • 0.126 in(7)
      • 0.128 in(6)
      • 0.129 in(2)
      • 0.131 in(1)
      • 0.138 in(7)
      • 0.143 in(4)
      • 0.147 in(2)
      • 0.151 in(2)
      • 0.152 in(2)
      • 0.156 in(4)
      • 0.157 in(5)
      • 0.167 in(5)
      • 0.169 in(4)
      • 0.177 in(5)
      • 0.178 in(4)
      • 0.185 in(5)
      • 0.188 in(5)
      • 0.189 in(5)
      • 0.192 in(1)
      • 0.193 in(1)
      • 0.195 in(4)
      • 0.196 in(4)
      • 0.197 in(1)
      • 0.202 in(1)
      • 0.213 in(1)
      • 0.217 in(1)
      • 0.219 in(1)
      • 0.237 in(1)
      • 0.25 in(1)
      • 0.256 in(1)
      Cutting Width MinkomuCutting Width Max
      Cutting Width
      Cutting Width
      • 0.5 mm(2)
      • 0.775 mm(2)
      • 0.8 mm(2)
      • 0.9 mm(2)
      • 1.0 mm(6)
      • 1.05 mm(2)
      • 1.201 mm(6)
      • 1.401 mm(2)
      • 1.475 mm(2)
      • 1.5 mm(6)
      • 1.576 mm(6)
      • 1.701 mm(2)
      • 1.75 mm(6)
      • 1.826 mm(4)
      • 1.951 mm(2)
      • 1.975 mm(4)
      • 2.0 mm(6)
      • 2.2 mm(6)
      • 2.225 mm(6)
      • 2.25 mm(5)
      • 2.375 mm(1)
      • 2.401 mm(6)
      • 2.475 mm(4)
      • 2.5 mm(6)
      • 2.676 mm(4)
      • 2.75 mm(6)
      • 2.801 mm(4)
      • 3.0 mm(7)
      • 3.1 mm(4)
      • 3.176 mm(7)
      • 3.2 mm(7)
      • 3.25 mm(6)
      • 3.276 mm(2)
      • 3.325 mm(1)
      • 3.5 mm(7)
      • 3.6 mm(4)
      • 3.725 mm(2)
      • 3.825 mm(2)
      • 3.85 mm(2)
      • 3.95 mm(4)
      • 3.975 mm(1)
      • 4.0 mm(5)
      • 4.25 mm(5)
      • 4.3 mm(4)
      • 4.5 mm(5)
      • 4.525 mm(4)
      • 4.7 mm(5)
      • 4.775 mm(5)
      • 4.801 mm(5)
      • 4.875 mm(1)
      • 4.9 mm(1)
      • 4.95 mm(4)
      • 4.976 mm(4)
      • 5.0 mm(1)
      • 5.125 mm(1)
      • 5.4 mm(1)
      • 5.5 mm(1)
      • 5.575 mm(1)
      • 6.0 mm(1)
      • 6.351 mm(1)
      • 6.5 mm(1)
      Cutting Width MinkomuCutting Width Max
      Insert Shape
      Insert Shape
      • C-DIAMOND/RHOMBIC 80 (20)
      • D-DIAMOND/RHOMBIC 55 (13)
      • LT-TRIANGLE LAY DOWN THREAD 60 (6)
      • S-SQUARE 90 (1)
      • TN-TOP NOTCH (7)
      • V-DIAMOND/RHOMBIC 35 (6)
      • W-TRIGON 80 (1)
      Insert Size
      Insert Size
      • 2 (2)
      • 3 (4)
      • 4 (1)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.138 in(2)
      • 0.21 in(4)
      • 0.294 in(1)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 3.5 mm(2)
      • 5.325 mm(4)
      • 7.476 mm(1)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      insertGeometry
      Cutting Tool Material
      Cutting Tool Material
      • B H (42)
      • B L (35)
      • C A (19)
      • C N (30)
      • D P (34)
      • H T (46)
      • H W (54)
      backEnd
      System Size
      System Size
      • PSC50 (26)
      No filters matching ""
      Upínání D
      (7)

      Upínání D

      Upínání P
      (20)

      Upínání P

      Upínání S
      (14)

      Upínání S

      Top Thread™ a Top Groove™
      (7)

      Top Thread™ a Top Groove™

      Závitování laydown
      (6)

      Závitování laydown

      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number Katalogové číslo ISO Karbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk