Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.
Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (10)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
    • M Stainless Steel (10)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
    • K Cast Iron (10)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(10)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(10)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(10)
    • N Non-Ferrous Materials (10)
      • N1
        Wrought Aluminum (10)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(10)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (10)
      • N6
        Carbon, Graphite Composites, CFRP (10)
      • N7
        MMC's (10)
    • S High-Temp Alloys (10)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
    • H Hardened Materials (10)
      • H1
        Hardened Materials 44-48 HRC(10)
      • H2
        Hardened Materials 48-55 HRC(10)
      • H3
        Hardened Materials 56-60 HRC(10)
      • H4
        Hardened Materials >60 HRC(10)
    • C CFRP Materials (10)
      • C1
        CFRP, CFRP / CFRP (10)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (10)
    Applications
    Applications
    • FacingFacing (3)
    • Multiple Direction CuttingMultiple Direction Cutting (10)
    • ProfilingProfiling (10)
    • TRN BoringTRN Boring (7)
    • TurningTurning (8)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (10)
    • Lightly Interrupted Cut (10)
    • Smooth Cut (10)
    • Varying Depth of Cut (10)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 62.5 (1)
    • 93.0 (4)
    • 95.0 (3)
    • 107.5 (2)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (3)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (9)
    • 2.0 (10)
    • 4.0 (3)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(2)
    • 0.001 in(9)
    • 0.002 in(9)
    • 0.004 in(10)
    • 0.008 in(10)
    • 0.016 in(10)
    • 0.031 in(10)
    • 0.047 in(10)
    • 0.063 in(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(2)
    • 0.025 mm(9)
    • 0.05 mm(9)
    • 0.1 mm(10)
    • 0.2 mm(10)
    • 0.4 mm(10)
    • 0.8 mm(10)
    • 1.201 mm(10)
    • 1.6 mm(2)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • GH1 (7)
    • HCK10 (10)
    • HK1500 (9)
    • HK35 (8)
    • HT2 (10)
    • HTX (10)
    • HWK15 (10)
    • K1010P (7)
    • K10M (8)
    • K10P (1)
    • K10U (9)
    • K15U (9)
    • K20K (8)
    • K313 (10)
    • K420 (7)
    • K68 (10)
    • KB1345 (10)
    • KB1610 (9)
    • KB1625 (7)
    • KB1630 (3)
    • KB5610 (9)
    • KB5625 (9)
    • KB5630 (9)
    • KB9610 (9)
    • KBH10 (9)
    • KBH20 (10)
    • KC5010 (10)
    • KC5020P (7)
    • KC5025 (10)
    • KC5410 (10)
    • KC720 (10)
    • KC730 (10)
    • KC732 (10)
    • KC8050 (10)
    • KC810 (10)
    • KC850 (10)
    • KC9010 (9)
    • KC9025 (10)
    • KC910 (10)
    • KC9105 (10)
    • KC9110 (10)
    • KC9120 (9)
    • KC9125 (10)
    • KC9225 (10)
    • KC9240 (10)
    • KC9240NEW (10)
    • KC9315 (10)
    • KC9320 (10)
    • KC9325 (10)
    • KC935 (10)
    • KC950 (9)
    • KC990 (9)
    • KCD25 (10)
    • KCK05 (10)
    • KCK05B (9)
    • KCK15 (10)
    • KCK15B (10)
    • KCK20 (10)
    • KCK20B (10)
    • KCM15 (10)
    • KCM15B (10)
    • KCM25 (10)
    • KCM25B (10)
    • KCM25S (9)
    • KCM35 (10)
    • KCM35B (9)
    • KCP05 (10)
    • KCP05B (2)
    • KCP10 (10)
    • KCP10B (10)
    • KCP20S (9)
    • KCP25 (10)
    • KCP25B (10)
    • KCP25C (10)
    • KCP30 (10)
    • KCP30B (3)
    • KCS10 (10)
    • KCS10B (10)
    • KCS25S (9)
    • KCU10 (10)
    • KCU10B (10)
    • KCU25 (10)
    • KCU25B (10)
    • KD050 (2)
    • KD081 (2)
    • KD1400 (9)
    • KD1425 (9)
    • KN10S (9)
    • KT125 (7)
    • KT175 (9)
    • KT315 (10)
    • KT325 (10)
    • KTP10 (9)
    • KTP25S (9)
    • KU10 (9)
    • KU10T (10)
    • KU30T (10)
    • NL300 (1)
    • NL920 (1)
    • PB100 (7)
    • PB170 (1)
    • PB250 (8)
    • PD100 (10)
    • PD50 (8)
    • SP0PW3 (1)
    • SP4019 (1)
    • SPN3W1 (2)
    • THM (10)
    • THM-X (10)
    • TN10P (10)
    • TN10U (10)
    • TN15M (10)
    • TN15U (9)
    • TN2000 (10)
    • TN20K (10)
    • TN20P (10)
    • TN30M (10)
    • TN4000 (2)
    • TN5015 (10)
    • TN5020 (10)
    • TN5105 (10)
    • TN5120 (10)
    • TN6010 (10)
    • TN6025 (9)
    • TN7005 (9)
    • TN7010 (10)
    • TN7015 (10)
    • TN7025 (10)
    • TN7035 (10)
    • TN7105 (10)
    • TN7110 (10)
    • TN7115 (10)
    • TN7125 (10)
    • TN7135 (10)
    • TN8025 (10)
    • TTI15 (9)
    • TTM (2)
    • TTR (10)
    • TTS (2)
    • TTX (9)
    • W00342 (8)
    • WBH10C (9)
    • WBH10P (9)
    • WBH10U (9)
    • WBH20P (10)
    • WBH25P (9)
    • WBH25U (7)
    • WBH30P (9)
    • WBK45U (10)
    • WDN00U (2)
    • WDN25U (9)
    • WK05CT (10)
    • WK15CT (10)
    • WK20CT (10)
    • WM15CT (10)
    • WM25CT (10)
    • WP15CT (10)
    • WP20TT (7)
    • WP25CT (10)
    • WP35CT (10)
    • WS10PT (10)
    • WS25PT (9)
    • WU05PT (10)
    • WU10HT (10)
    • WU10PT (10)
    • WU25PT (10)
    Hand Of Tool
    Hand Of Tool
    • L (1)
    • N (1)
    • R (1)
    Wiper Insert
    Wiper Insert
    • N (10)
    • Y (7)
    F Dimension
    F Dimension
    • 0.0 mm(1)
    • 22.0 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(1)
    • 0.866 in(2)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 44.0 mm(7)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 1.732 in(7)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • S (3)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (3)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.379 in(7)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 35.0 mm(7)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (3)
    • D-DIAMOND/RHOMBIC 55 (7)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (10)
    • B L (10)
    • C N (2)
    • D P (10)
    • H T (10)
    • H W (10)
    backEnd
    Connection Type
    Connection Type
    • TAPER SHANK (3)
    System Size
    System Size
    • KM32 (3)
    No filters matching ""
    SDNC 62° 30' - KM32TS Cutting Units (S-Clamping OD)
    (1)

    SDNC 62° 30' - KM32TS Cutting Units (S-Clamping OD)

    SCLC 95° - KM32TS Cutting Units (S-Clamping OD)
    (3)

    SCLC 95° - KM32TS Cutting Units (S-Clamping OD)

    SDQC 107° 30' - KM32TS Cutting Units (S-Clamping OD)
    (2)

    SDQC 107° 30' - KM32TS Cutting Units (S-Clamping OD)

    SDUC 93° - KM32TS Cutting Units (S-Clamping OD)
    (2)

    SDUC 93° - KM32TS Cutting Units (S-Clamping OD)

    SDJC 93° - KM32TS Cutting Units (S-Clamping OD)
    (2)

    SDJC 93° - KM32TS Cutting Units (S-Clamping OD)

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?