Face Milling
Helical Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 3934623 |
| ISO katalogové ID | M170D052Z04RD16 |
| ANSI katalogové ID | M170D052Z04RD16 |
| [D1MAX] Maximum Cutting Diameter | 52 mm |
| [D1MAX] Maximum Cutting Diameter | 2.047 in |
| [D1] Effective Cutting Diameter | 36 mm |
| [D1] Effective Cutting Diameter | 1.417 in |
| [D] Adapter / Shank / Bore Diameter | 22 mm |
| [D] Adapter / Shank / Bore Diameter | .8661 in |
| [D6] Hub Diameter | 44 mm |
| [D6] Hub Diameter | 1.732 in |
| [L] Overall Length | 50 mm |
| [L] Overall Length | 1.969 in |
| [L1] Gage Length | 50 mm |
| [L1] Gage Length | 1.969 in |
| [AP1MAX] 1st Maximum Cutting Depth | 8 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .315 in |
| Number of Inserts | 4 |
| Maximum Ramping Angle | 8.2 |
| Max RPM | 7650 |
| Coolant Supply | Y |
| Weight Kilograms | 0.36 |
Face MillingHelical MillingRamping: BlankSlotting: Square EndSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Through CoolantMilling - Side and FacePocketingVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | MM | TN6525 | MM | TN6525 | MM | TN6540 |
| P3–P4 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| P5–P6 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| M1–M2 | – | – | MM | TN6525 | MM | TN6540 |
| M3 | – | – | MM | TN6525 | MM | TN6540 |
| K1–K2 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| K3 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | MM | TN6540 | – | – |
| S3 | – | – | MM | TN6540 | – | – |
| S4 | – | – | MM | TN6540 | – | – |
| H1 | MH | TN2505 | MH | TN2505 | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,39 | 0,52 | 0,82 | 0,28 | 0,37 | 0,59 | 0,21 | 0,28 | 0,44 | 0,18 | 0,24 | 0,38 | 0,17 | 0,22 | 0,35 | MM |
| MH | 0,51 | 0,70 | 1,17 | 0,37 | 0,50 | 0,84 | 0,28 | 0,38 | 0,63 | 0,24 | 0,33 | 0,55 | 0,22 | 0,30 | 0,50 | MH |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,45 | 0,60 | 0,94 | 0,32 | 0,43 | 0,68 | 0,24 | 0,32 | 0,51 | 0,21 | 0,28 | 0,44 | 0,19 | 0,26 | 0,40 | MM |
| MH | 0,59 | 0,81 | 1,36 | 0,43 | 0,58 | 0,97 | 0,32 | 0,43 | 0,72 | 0,28 | 0,38 | 0,63 | 0,25 | 0,35 | 0,58 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,81 | 1,08 | 1,71 | 0,58 | 0,78 | 1,22 | 0,43 | 0,58 | 0,91 | 0,38 | 0,51 | 0,79 | 0,35 | 0,46 | 0,72 | MM |
| MH | 1,06 | 1,46 | 2,48 | 0,76 | 1,04 | 1,75 | 0,57 | 0,78 | 1,30 | 0,50 | 0,68 | 1,13 | 0,45 | 0,62 | 1,03 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,59 | 0,79 | 1,24 | 0,43 | 0,57 | 0,89 | 0,32 | 0,42 | 0,66 | 0,28 | 0,37 | 0,58 | 0,25 | 0,34 | 0,53 | MM |
| MH | 0,77 | 1,06 | 1,79 | 0,56 | 0,76 | 1,28 | 0,42 | 0,57 | 0,95 | 0,36 | 0,50 | 0,83 | 0,33 | 0,45 | 0,76 | MH |
| Material Group | TN2505 | TN6525 | TN6540 | |||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?