Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 6596440 |
| ISO katalogové ID | XDPT120515SRMH |
| ANSI katalogové ID | XDPT120515SRMH |
| Grade | WP40PM |
| Cutting Edges per Insert | 4 |
| [LI] Insert Length | 12.7 mm |
| [LI] Insert Length | .5 in |
| [S] Insert Thickness | 5.556 mm |
| [S] Insert Thickness | .2188 in |
| [D] Insert IC Size | 12.7 mm |
| [D] Insert IC Size | .5 in |
| [Rε] Corner Radius | 1.5 mm |
| [Rε] Corner Radius | .0586 in |
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| P3–P4 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| P5–P6 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| M1–M2 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| M3 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S1–S2 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S3 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S4 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,43 | 1,39 | 2,20 | 0,31 | 0,99 | 1,56 | 0,23 | 0,74 | 1,15 | 0,20 | 0,64 | 1,00 | 0,19 | 0,59 | 0,92 | .E..MM |
| .S..MH | 0,62 | 1,57 | 2,41 | 0,45 | 1,12 | 1,70 | 0,33 | 0,84 | 1,26 | 0,29 | 0,73 | 1,10 | 0,27 | 0,67 | 1,00 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,49 | 1,59 | 2,52 | 0,35 | 1,13 | 1,78 | 0,26 | 0,84 | 1,31 | 0,23 | 0,73 | 1,14 | 0,21 | 0,67 | 1,04 | .E..MM |
| .S..MH | 0,70 | 1,80 | 2,76 | 0,51 | 1,28 | 1,94 | 0,38 | 0,95 | 1,44 | 0,33 | 0,83 | 1,25 | 0,30 | 0,76 | 1,14 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,36 | 1,15 | 1,81 | 0,26 | 0,83 | 1,29 | 0,19 | 0,62 | 0,96 | 0,17 | 0,54 | 0,83 | 0,15 | 0,49 | 0,76 | .E..MM |
| .S..MH | 0,51 | 1,30 | 1,99 | 0,37 | 0,93 | 1,41 | 0,28 | 0,70 | 1,05 | 0,24 | 0,61 | 0,91 | 0,22 | 0,55 | 0,83 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .018 | .051 | .094 | .013 | .035 | .059 | .009 | .025 | .042 | .008 | .022 | .037 | .007 | .020 | .033 | .E..MM |
| .S..MH | .032 | .070 | .118 | .023 | .046 | .071 | .017 | .033 | .050 | .014 | .029 | .043 | .013 | .026 | .039 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .020 | .058 | .109 | .014 | .039 | .067 | .010 | .028 | .047 | .009 | .025 | .041 | .008 | .022 | .037 | .E..MM |
| .S..MH | .036 | .080 | .141 | .025 | .052 | .080 | .019 | .037 | .056 | .016 | .032 | .048 | .015 | .029 | .043 | .S..MH |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .015 | .043 | .076 | .011 | .029 | .050 | .008 | .022 | .036 | .007 | .019 | .031 | .006 | .017 | .028 | .E..MM |
| .S..MH | .027 | .058 | .093 | .019 | .039 | .059 | .014 | .028 | .042 | .012 | .024 | .036 | .011 | .022 | .033 | .S..MH |
| Material Group | WP25PM | WP40PM | WS40PM | |||||||
| P | 1 | 395 | 340 | 325 | 355 | 310 | 295 | – | – | – |
| 2 | 330 | 290 | 240 | 300 | 260 | 215 | – | – | – | |
| 3 | 305 | 260 | 210 | 275 | 235 | 190 | – | – | – | |
| 4 | 270 | 220 | 180 | 245 | 205 | 160 | – | – | – | |
| 5 | 220 | 205 | 180 | 205 | 185 | 160 | 205 | 175 | 145 | |
| 6 | 200 | 150 | 120 | 180 | 140 | 110 | 180 | 130 | 95 | |
| M | 1 | 245 | 215 | 200 | 235 | 205 | 185 | 250 | 205 | 170 |
| 2 | 220 | 190 | 155 | 210 | 180 | 150 | 215 | 175 | 145 | |
| 3 | 170 | 145 | 115 | 155 | 140 | 110 | 175 | 130 | 100 | |
| S | 1 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 |
| 2 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 | |
| 3 | 60 | 50 | 30 | 60 | 50 | 35 | 60 | 50 | 30 | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 70 | 60 | 35 | |
| Material Group | WP25PM | WP40PM | WS40PM | |||||||
| P | 1 | 1295 | 1115 | 1065 | 1165 | 1015 | 970 | – | – | – |
| 2 | 1085 | 950 | 785 | 985 | 855 | 705 | – | – | – | |
| 3 | 1000 | 855 | 690 | 900 | 770 | 625 | – | – | – | |
| 4 | 885 | 720 | 590 | 805 | 675 | 525 | – | – | – | |
| 5 | 720 | 675 | 590 | 675 | 605 | 525 | 675 | 575 | 475 | |
| 6 | 655 | 490 | 395 | 590 | 460 | 360 | 590 | 425 | 310 | |
| M | 1 | 805 | 705 | 655 | 770 | 675 | 605 | 820 | 675 | 560 |
| 2 | 720 | 625 | 510 | 690 | 590 | 490 | 705 | 575 | 475 | |
| 3 | 560 | 475 | 375 | 510 | 460 | 360 | 575 | 425 | 330 | |
| S | 1 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 |
| 2 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 | |
| 3 | 195 | 165 | 100 | 195 | 165 | 115 | 195 | 165 | 100 | |
| 4 | 280 | 195 | 130 | 260 | 195 | 130 | 230 | 195 | 115 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?