Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

M370™ Series • IC12 • Large - Tool Bodies

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (25)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(25)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
    • M Stainless Steel (25)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(25)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(25)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(25)
    • K Cast Iron (25)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
    • N Non-Ferrous Materials (25)
      • N1
        Wrought Aluminum (25)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(25)
    • S High-Temp Alloys (25)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(25)
    • H Hardened Materials (25)
      • H1
        Hardened Materials 44-48 HRC(25)
    Select All Star
    • US (4)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (1)
    • Face MillingFace Milling (25)
    • PocketPocket (25)
    • Pocket HelicalPocket Helical (24)
    • Pocket MillingPocket Milling (25)
    • Pocket Plunge MillingPocket Plunge Milling (24)
    • Profile MillingProfile Milling (25)
    • RampingRamping (25)
    • Shoulder MillingShoulder Milling (24)
    • Shoulder RoughingShoulder Roughing (24)
    • Slot MillingSlot Milling (24)
    Cutting Diameter
    Cutting Diameter
    • 0.838 in(2)
    • 1.303 in(1)
    • 1.335 in(2)
    • 1.383 in(1)
    • 1.815 in(2)
    • 1.835 in(2)
    • 1.932 in(1)
    • 2.329 in(1)
    • 2.334 in(3)
    • 2.483 in(2)
    • 3.27 in(2)
    • 3.333 in(2)
    • 4.255 in(2)
    • 4.333 in(1)
    • 5.333 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 21.276 mm(2)
    • 33.1 mm(1)
    • 33.9 mm(2)
    • 35.1 mm(1)
    • 46.1 mm(2)
    • 46.6 mm(2)
    • 49.075 mm(1)
    • 59.151 mm(1)
    • 59.276 mm(3)
    • 63.075 mm(2)
    • 83.051 mm(2)
    • 84.65 mm(2)
    • 108.051 mm(2)
    • 110.051 mm(1)
    • 135.451 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 38.1 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(2)
    • 52.0 mm(1)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 66.0 mm(1)
    • 76.2 mm(4)
    • 80.0 mm(2)
    • 100.0 mm(2)
    • 101.601 mm(2)
    • 125.0 mm(2)
    • 127.0 mm(1)
    • 152.4 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.5 in(2)
    • 1.969 in(1)
    • 2.0 in(2)
    • 2.047 in(1)
    • 2.48 in(2)
    • 2.5 in(2)
    • 2.598 in(1)
    • 3.0 in(4)
    • 3.15 in(2)
    • 3.938 in(2)
    • 4.0 in(2)
    • 4.921 in(2)
    • 5.0 in(1)
    • 6.0 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Reach
    Reach
    • 1.575 in(1)
    • 1.69 in(1)
    • 1.75 in(3)
    • 1.969 in(9)
    • 1.971 in(1)
    • 2.0 in(5)
    • 2.375 in(2)
    • 2.48 in(2)
    • 2.5 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(1)
    • 42.926 mm(1)
    • 44.45 mm(3)
    • 50.0 mm(9)
    • 50.051 mm(1)
    • 50.801 mm(5)
    • 60.325 mm(2)
    • 63.0 mm(2)
    • 63.5 mm(1)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (1)
    • A-Socket Head Cap Screw (22)
    • Straight-Cylindrical (2)
    Number of Flutes
    Number of Flutes
    • 2 (2)
    • 4 (5)
    • 5 (6)
    • 6 (6)
    • 7 (3)
    • 8 (1)
    • 9 (2)
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(1)
    • 1.75 in(3)
    • 1.969 in(9)
    • 1.971 in(1)
    • 2.0 in(5)
    • 2.375 in(2)
    • 2.48 in(2)
    • 6.0 in(1)
    • 10.0 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(1)
    • 44.45 mm(3)
    • 50.0 mm(9)
    • 50.051 mm(1)
    • 50.801 mm(5)
    • 60.325 mm(2)
    • 63.0 mm(2)
    • 152.4 mm(1)
    • 254.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15CM (25)
    • WP20CM (25)
    • WP25PM (25)
    • WP35CM (25)
    • WP40PM (25)
    • WS30PM (25)
    • WS40PM (25)
    • WU35PM (25)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.8 (1)
    • 1.0 (3)
    • 1.3 (4)
    • 1.8 (2)
    • 1.9 (4)
    • 2.4 (1)
    • 2.5 (3)
    • 2.6 (1)
    • 3.5 (1)
    • 3.6 (2)
    • 3.7 (1)
    • 6.4 (2)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (2)
    • SHELL MILL (23)
    Back-End Diameter
    Back-End Diameter
    • 19.1 mm(3)
    • 22.0 mm(4)
    • 25.401 mm(3)
    • 27.0 mm(3)
    • 31.701 mm(1)
    • 31.8 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(4)
    • 40.0 mm(2)
    • 50.801 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.752 in(3)
    • 0.866 in(4)
    • 1.0 in(3)
    • 1.063 in(3)
    • 1.248 in(1)
    • 1.252 in(2)
    • 1.26 in(2)
    • 1.5 in(4)
    • 1.575 in(2)
    • 2.0 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    M370 • Nástrčné frézy WO08..
    (12)

    M370 • Nástrčné frézy WO08..

    M370 • Nástrčné frézy • WO12... • Metrické
    (11)

    M370 • Nástrčné frézy • WO12... • Metrické

    M370 • Válcová stopka WO08..
    (2)

    M370 • Válcová stopka WO08..

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk