Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

M1200 MAX

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (22)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
    • M Stainless Steel (22)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
    • K Cast Iron (24)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(24)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(24)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(24)
    • N Non-Ferrous Materials (10)
      • N1
        Wrought Aluminum (10)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(10)
    • S High-Temp Alloys (22)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
    • H Hardened Materials (10)
      • H1
        Hardened Materials 44-48 HRC(10)
    Select All Star
    • CN (11)
    • DE (18)
    • IN (18)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (19)
    • Face MillingFace Milling (19)
    Cutting Diameter
    Cutting Diameter
    • 2.48 in(1)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(2)
    • 4.0 in(2)
    • 4.921 in(2)
    • 6.0 in(2)
    • 6.299 in(2)
    • 7.875 in(2)
    • 9.843 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 63.0 mm(1)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(2)
    • 101.601 mm(2)
    • 125.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(2)
    • 200.0 mm(2)
    • 250.0 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 74.8 mm(1)
    • 88.0 mm(2)
    • 91.801 mm(2)
    • 111.801 mm(2)
    • 113.4 mm(2)
    • 136.75 mm(1)
    • 136.8 mm(1)
    • 164.15 mm(1)
    • 164.201 mm(1)
    • 171.75 mm(1)
    • 171.8 mm(1)
    • 211.75 mm(1)
    • 211.8 mm(1)
    • 261.75 mm(1)
    • 261.8 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 2.945 in(1)
    • 3.465 in(2)
    • 3.614 in(2)
    • 4.402 in(2)
    • 4.465 in(2)
    • 5.384 in(1)
    • 5.386 in(1)
    • 6.463 in(1)
    • 6.465 in(1)
    • 6.763 in(1)
    • 6.764 in(1)
    • 8.337 in(1)
    • 8.339 in(1)
    • 10.305 in(1)
    • 10.307 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 7.5 mm(19)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.295 in(19)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.575 in(1)
    • 1.75 in(2)
    • 1.969 in(4)
    • 2.0 in(2)
    • 2.38 in(2)
    • 2.48 in(8)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(1)
    • 44.45 mm(2)
    • 50.0 mm(4)
    • 50.801 mm(2)
    • 60.45 mm(2)
    • 63.0 mm(8)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 56.0 (19)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (5)
    • B-Cutter Retention Screw (8)
    • C-Bolt Circle (6)
    Number of Flutes
    Number of Flutes
    • 10 (4)
    • 12 (1)
    • 14 (2)
    • 18 (2)
    • 22 (1)
    • 28 (1)
    • 5 (2)
    • 6 (1)
    • 7 (2)
    • 8 (2)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(1)
    • 1.75 in(2)
    • 1.969 in(4)
    • 2.0 in(2)
    • 2.38 in(2)
    • 2.48 in(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(1)
    • 44.45 mm(2)
    • 50.0 mm(4)
    • 50.801 mm(2)
    • 60.45 mm(2)
    • 63.0 mm(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(12)
    • 1.201 mm(12)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(12)
    • 0.047 in(12)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15CM (21)
    • WP35CM (21)
    • WU20PM (10)
    Hand Of Tool
    Hand Of Tool
    • R (19)
    Wiper Insert
    Wiper Insert
    • N (5)
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (5)
    Insert IC Size
    Insert IC Size
    • 19.05 mm(5)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.75 in(5)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 10.75 mm(5)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.423 in(5)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • MM (5)
    Cutting Tool Material
    Cutting Tool Material
    • H W (5)
    Tolerance Class
    Tolerance Class
    • M (5)
    backEnd
    Connection Type
    Connection Type
    • SHELL MILL (19)
    Back-End Diameter
    Back-End Diameter
    • 22.0 mm(1)
    • 25.401 mm(2)
    • 27.0 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(4)
    • 50.801 mm(2)
    • 60.0 mm(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.866 in(1)
    • 1.0 in(2)
    • 1.063 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(4)
    • 2.0 in(2)
    • 2.362 in(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    M1200 MAX upnutí šroubem (56°)
    (12)

    M1200 MAX upnutí šroubem (56°)

    M1200 Max klínová upínka (56°)
    (12)

    M1200 Max klínová upínka (56°)

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?