Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    M270 High Feed

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (20)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(18)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(18)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(18)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(18)
      • M Stainless Steel (18)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(18)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(18)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(18)
      • K Cast Iron (20)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(20)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(20)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(20)
      • S High-Temp Alloys (4)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
      • H Hardened Materials (17)
        • H1
          Hardened Materials 44-48 HRC(17)
        • H2
          Hardened Materials 48-55 HRC(9)
        • H3
          Hardened Materials 56-60 HRC(9)
      Applications
      Applications
      • Face MillingFace Milling (25)
      • PocketPocket (25)
      • Pocket HelicalPocket Helical (25)
      • Pocket MillingPocket Milling (25)
      • RampingRamping (25)
      • Shoulder MillingShoulder Milling (25)
      • Shoulder Square EndShoulder Square End (25)
      • Slot MillingSlot Milling (25)
      • Slot Square EndSlot Square End (25)
      Cutting Diameter
      Cutting Diameter
      • 0.375 in(2)
      • 0.394 in(3)
      • 0.473 in(4)
      • 0.5 in(3)
      • 0.625 in(2)
      • 0.626 in(1)
      • 0.63 in(4)
      • 0.75 in(2)
      • 0.787 in(4)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 9.525 mm(2)
      • 10.0 mm(3)
      • 12.0 mm(4)
      • 12.701 mm(3)
      • 15.875 mm(2)
      • 15.9 mm(1)
      • 16.0 mm(4)
      • 19.05 mm(2)
      • 20.0 mm(4)
      Cutting Diameter MinkomuCutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 13.0 mm(4)
      • 17.0 mm(4)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 0.512 in(4)
      • 0.669 in(4)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 0.55 mm(3)
      • 0.601 mm(6)
      • 0.625 mm(3)
      • 0.9 mm(4)
      • 0.925 mm(3)
      • 1.1 mm(3)
      • 1.125 mm(3)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.022 in(3)
      • 0.024 in(6)
      • 0.025 in(3)
      • 0.035 in(4)
      • 0.037 in(3)
      • 0.044 in(6)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 0.752 in(1)
      • 0.984 in(1)
      • 1.0 in(1)
      • 1.181 in(1)
      • 1.25 in(1)
      • 1.575 in(1)
      • 1.772 in(3)
      • 1.8 in(1)
      • 1.969 in(3)
      • 2.0 in(2)
      • 2.244 in(3)
      • 2.299 in(1)
      • 2.301 in(1)
      • 2.757 in(3)
      • 2.801 in(2)
      Reach MinkomuReach Max
      Reach
      Reach
      • 19.1 mm(1)
      • 25.0 mm(1)
      • 25.401 mm(1)
      • 30.0 mm(1)
      • 31.75 mm(1)
      • 40.0 mm(1)
      • 45.0 mm(3)
      • 45.725 mm(1)
      • 50.0 mm(3)
      • 50.801 mm(2)
      • 57.0 mm(3)
      • 58.401 mm(1)
      • 58.426 mm(1)
      • 70.0 mm(3)
      • 71.125 mm(2)
      Reach MinkomuReach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (25)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Screw-On Connection (3)
      • Straight-Cylindrical (22)
      Number of Flutes
      Number of Flutes
      • 2 (25)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 0.0 (30)
      • 2.0 (20)
      Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.655 in(1)
      • 1.85 in(1)
      • 2.323 in(1)
      • 4.724 in(3)
      • 5.252 in(1)
      • 5.5 in(1)
      • 5.513 in(2)
      • 5.55 in(1)
      • 5.75 in(2)
      • 5.752 in(1)
      • 5.906 in(2)
      • 6.0 in(2)
      • 6.299 in(2)
      • 7.0 in(2)
      • 7.087 in(2)
      • 7.875 in(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 42.0 mm(1)
      • 47.0 mm(1)
      • 59.0 mm(1)
      • 120.0 mm(3)
      • 133.4 mm(1)
      • 139.701 mm(1)
      • 140.0 mm(2)
      • 140.975 mm(1)
      • 146.05 mm(2)
      • 146.1 mm(1)
      • 150.0 mm(2)
      • 152.4 mm(2)
      • 160.0 mm(2)
      • 177.8 mm(2)
      • 180.0 mm(2)
      • 200.0 mm(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.012 in(15)
      • 0.02 in(15)
      • 0.024 in(2)
      • 0.025 in(5)
      • 0.03 in(6)
      • 0.031 in(5)
      • 0.039 in(19)
      • 0.047 in(2)
      • 0.049 in(4)
      • 0.063 in(3)
      • 0.079 in(4)
      • 0.08 in(8)
      • 0.12 in(4)
      • 0.158 in(4)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.301 mm(15)
      • 0.5 mm(15)
      • 0.601 mm(2)
      • 0.625 mm(5)
      • 0.75 mm(6)
      • 0.8 mm(5)
      • 1.0 mm(19)
      • 1.201 mm(2)
      • 1.25 mm(4)
      • 1.6 mm(3)
      • 2.0 mm(4)
      • 2.025 mm(8)
      • 3.051 mm(4)
      • 4.025 mm(4)
      Corner Radius MinkomuCorner Radius Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • TN2505 (27)
      • TN2510 (15)
      • TN2525 (15)
      • TN6525 (24)
      • TN6540 (26)
      • WU10PM (15)
      Hand Of Tool
      Hand Of Tool
      • R (25)
      Wiper Insert
      Wiper Insert
      • N (5)
      frontEnd
      Cutting Width
      Cutting Width
      • 0.394 in(2)
      • 0.473 in(2)
      • 0.63 in(1)
      Cutting Width MinkomuCutting Width Max
      Cutting Width
      Cutting Width
      • 10.0 mm(2)
      • 12.0 mm(2)
      • 16.0 mm(1)
      Cutting Width MinkomuCutting Width Max
      Neck Diameter
      Neck Diameter
      • 0.346 in(4)
      • 0.417 in(6)
      • 0.509 in(1)
      • 0.559 in(5)
      • 0.701 in(1)
      • 0.706 in(3)
      • 0.707 in(1)
      Neck Diameter MinkomuNeck Diameter Max
      Neck Diameter
      Neck Diameter
      • 8.775 mm(4)
      • 10.601 mm(6)
      • 12.925 mm(1)
      • 14.201 mm(5)
      • 17.776 mm(1)
      • 17.925 mm(3)
      • 17.95 mm(1)
      Neck Diameter MinkomuNeck Diameter Max
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • DMT-TOROIDAL (5)
      Cutting Tool Material
      Cutting Tool Material
      • H W (5)
      backEnd
      Connection Type
      Connection Type
      • CYLINDRICAL (22)
      • SCREW-ON (3)
      Back-End Diameter
      Back-End Diameter
      • 9.525 mm(1)
      • 10.0 mm(3)
      • 12.0 mm(3)
      • 12.701 mm(4)
      • 13.0 mm(2)
      • 15.875 mm(3)
      • 16.0 mm(3)
      • 18.0 mm(1)
      • 19.05 mm(2)
      • 20.0 mm(3)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.375 in(1)
      • 0.394 in(3)
      • 0.473 in(3)
      • 0.5 in(4)
      • 0.512 in(2)
      • 0.625 in(3)
      • 0.63 in(3)
      • 0.709 in(1)
      • 0.75 in(2)
      • 0.787 in(3)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      Těla nástrojů
      (25)

      Těla nástrojů

      Břitové destičky
      (5)

      Břitové destičky

      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number Katalogové číslo ISO Karbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk