Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

VSM17 Series - Tool Bodies

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (59)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(59)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(59)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(59)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(59)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(59)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(59)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(59)
    • M Stainless Steel (59)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(59)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(59)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(59)
    • K Cast Iron (59)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(59)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(59)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(59)
    • N Non-Ferrous Materials (59)
      • N1
        Wrought Aluminum (59)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(59)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(59)
    • S High-Temp Alloys (59)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(59)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(59)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(59)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(59)
    • H Hardened Materials (59)
      • H1
        Hardened Materials 44-48 HRC(59)
    Select All Star
    • CN (23)
    • DE (26)
    • IN (1)
    • SG (8)
    • US (14)
    Applications
    Applications
    • Face MillingFace Milling (59)
    • PocketPocket (59)
    • Pocket HelicalPocket Helical (59)
    • Pocket MillingPocket Milling (59)
    • Profile MillingProfile Milling (59)
    • RampingRamping (59)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (59)
    • Shoulder MillingShoulder Milling (59)
    • Shoulder RoughingShoulder Roughing (59)
    • Shoulder Square EndShoulder Square End (59)
    • Slot MillingSlot Milling (2)
    • Slot SideSlot Side (2)
    • Slot Square EndSlot Square End (2)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.248 in(6)
    • 1.26 in(6)
    • 1.5 in(9)
    • 1.575 in(8)
    • 1.969 in(3)
    • 2.0 in(5)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(1)
    • 4.0 in(1)
    • 4.921 in(1)
    • 5.0 in(1)
    • 6.0 in(1)
    • 6.299 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.701 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(9)
    • 40.0 mm(8)
    • 50.0 mm(3)
    • 50.801 mm(5)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(1)
    • 101.601 mm(1)
    • 125.0 mm(1)
    • 127.0 mm(1)
    • 152.4 mm(1)
    • 160.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 15.601 mm(1)
    • 15.701 mm(2)
    • 15.8 mm(3)
    • 15.9 mm(4)
    • 16.0 mm(4)
    • 16.1 mm(6)
    • 16.2 mm(17)
    • 16.3 mm(16)
    • 16.401 mm(4)
    • 60.401 mm(1)
    • 104.601 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.614 in(1)
    • 0.618 in(2)
    • 0.622 in(3)
    • 0.626 in(4)
    • 0.63 in(4)
    • 0.634 in(6)
    • 0.638 in(17)
    • 0.642 in(16)
    • 0.646 in(4)
    • 2.378 in(1)
    • 4.118 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.22 in(1)
    • 1.248 in(1)
    • 1.299 in(1)
    • 1.379 in(1)
    • 1.5 in(4)
    • 1.536 in(2)
    • 1.575 in(15)
    • 1.72 in(2)
    • 1.732 in(2)
    • 1.748 in(2)
    • 1.752 in(2)
    • 1.81 in(2)
    • 1.969 in(11)
    • 2.0 in(9)
    • 2.48 in(2)
    • 3.5 in(1)
    • 5.5 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 31.0 mm(1)
    • 31.701 mm(1)
    • 33.0 mm(1)
    • 35.0 mm(1)
    • 38.1 mm(4)
    • 39.0 mm(2)
    • 40.0 mm(15)
    • 43.7 mm(2)
    • 44.0 mm(2)
    • 44.401 mm(2)
    • 44.5 mm(2)
    • 45.975 mm(2)
    • 50.0 mm(11)
    • 50.801 mm(9)
    • 63.0 mm(2)
    • 88.9 mm(1)
    • 139.701 mm(1)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (23)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (9)
    • Straight-Cylindrical (18)
    • Weldon (8)
    Number of Flutes
    Number of Flutes
    • 12 (2)
    • 2 (12)
    • 3 (15)
    • 4 (14)
    • 5 (4)
    • 6 (6)
    • 7 (2)
    • 8 (2)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (59)
    • 2.0 (59)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(12)
    • 1.752 in(2)
    • 1.969 in(3)
    • 2.0 in(3)
    • 2.114 in(1)
    • 2.244 in(1)
    • 2.465 in(4)
    • 2.48 in(2)
    • 2.539 in(3)
    • 3.5 in(2)
    • 3.543 in(1)
    • 3.938 in(1)
    • 4.0 in(2)
    • 4.331 in(2)
    • 4.5 in(3)
    • 4.724 in(2)
    • 4.799 in(1)
    • 5.118 in(2)
    • 5.202 in(2)
    • 5.5 in(1)
    • 6.694 in(1)
    • 6.702 in(1)
    • 8.0 in(1)
    • 8.268 in(2)
    • 9.799 in(2)
    • 9.843 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(12)
    • 44.5 mm(2)
    • 50.0 mm(3)
    • 50.801 mm(3)
    • 53.7 mm(1)
    • 57.0 mm(1)
    • 62.6 mm(4)
    • 63.0 mm(2)
    • 64.5 mm(3)
    • 88.9 mm(2)
    • 90.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(2)
    • 110.0 mm(2)
    • 114.301 mm(3)
    • 120.0 mm(2)
    • 121.9 mm(1)
    • 130.0 mm(2)
    • 132.1 mm(2)
    • 139.701 mm(1)
    • 170.0 mm(1)
    • 170.201 mm(1)
    • 203.201 mm(1)
    • 210.0 mm(2)
    • 248.9 mm(2)
    • 250.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(59)
    • 0.031 in(59)
    • 0.047 in(59)
    • 0.063 in(59)
    • 0.079 in(59)
    • 0.095 in(59)
    • 0.126 in(59)
    • 0.157 in(59)
    • 0.237 in(59)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(59)
    • 0.8 mm(59)
    • 1.201 mm(59)
    • 1.6 mm(59)
    • 2.0 mm(59)
    • 2.401 mm(59)
    • 3.2 mm(59)
    • 4.0 mm(59)
    • 6.0 mm(59)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15CM (59)
    • WK15PM (59)
    • WN10HM (59)
    • WN25PM (59)
    • WP25PM (59)
    • WP35CM (59)
    • WP40PM (59)
    • WS40PM (59)
    • WU20PM (59)
    • WU35PM (59)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.7 (2)
    • 0.9 (2)
    • 1.2 (2)
    • 1.6 (2)
    • 1.7 (2)
    • 2.1 (4)
    • 3.0 (8)
    • 4.0 (8)
    • 4.3 (9)
    • 5.7 (6)
    • 5.8 (6)
    • 8.5 (4)
    • 8.8 (4)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.828 in(3)
    • 0.843 in(3)
    • 1.093 in(4)
    • 1.102 in(5)
    • 1.343 in(6)
    • 1.417 in(5)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 21.0 mm(3)
    • 21.401 mm(3)
    • 27.75 mm(4)
    • 28.0 mm(5)
    • 34.1 mm(6)
    • 36.0 mm(5)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (26)
    • SCREW-ON (9)
    • SHELL MILL (24)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 19.1 mm(6)
    • 21.0 mm(2)
    • 22.0 mm(5)
    • 25.0 mm(3)
    • 25.401 mm(7)
    • 27.0 mm(2)
    • 29.0 mm(7)
    • 31.701 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(10)
    • 38.1 mm(9)
    • 40.0 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.752 in(6)
    • 0.828 in(2)
    • 0.866 in(5)
    • 0.984 in(3)
    • 1.0 in(7)
    • 1.063 in(2)
    • 1.143 in(7)
    • 1.248 in(3)
    • 1.25 in(1)
    • 1.26 in(10)
    • 1.5 in(9)
    • 1.575 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    VSM17™ • Nástrčné frézy • Metrické
    (11)

    VSM17™ • Nástrčné frézy • Metrické

    VSM17™ • Stopkové frézy s válcovou stopkou • Metrické
    (10)

    VSM17™ • Stopkové frézy s válcovou stopkou • Metrické

    VSM17 • Cylindrical End Mills (regular and long version) • Inch
    (8)

    VSM17 • Cylindrical End Mills (regular and long version) • Inch

    VSM17™ • Shell Mills • Inch
    (11)

    VSM17™ • Shell Mills • Inch

    VSM17™ • Frézy se stopkou Weldon® • Metrické
    (3)

    VSM17™ • Frézy se stopkou Weldon® • Metrické

    VSM17™ • Frézy se závitovou stopkou • Metrické
    (4)

    VSM17™ • Frézy se závitovou stopkou • Metrické

    VSM17™ • Weldon® End Mills • Inch
    (5)

    VSM17™ • Weldon® End Mills • Inch

    VSM17H™ • Helical Shell Mills • Long Reach • Inch
    (2)

    VSM17H™ • Helical Shell Mills • Long Reach • Inch

    VSM17 • Screw-On End Mills • Inch
    (5)

    VSM17 • Screw-On End Mills • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?