Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

M680 - Tool Bodies XP16

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (19)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(19)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(19)
    • M Stainless Steel (19)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(19)
    • K Cast Iron (19)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(19)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(19)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
    • N Non-Ferrous Materials (19)
      • N1
        Wrought Aluminum (19)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(19)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (17)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (17)
      • N6
        Carbon, Graphite Composites, CFRP (17)
      • N7
        MMC's (17)
    • S High-Temp Alloys (19)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
    • H Hardened Materials (19)
      • H1
        Hardened Materials 44-48 HRC(19)
    Select All Star
    • CN (8)
    • DE (11)
    • GB (1)
    • IN (9)
    Applications
    Applications
    • Face MillingFace Milling (19)
    • Shoulder MillingShoulder Milling (19)
    • Shoulder Square EndShoulder Square End (17)
    • Slot MillingSlot Milling (19)
    • Slot Square EndSlot Square End (17)
    Cutting Diameter
    Cutting Diameter
    • 0.63 in(1)
    • 0.787 in(1)
    • 0.984 in(2)
    • 1.0 in(1)
    • 1.26 in(2)
    • 1.379 in(1)
    • 1.575 in(3)
    • 1.969 in(2)
    • 2.0 in(1)
    • 2.48 in(1)
    • 3.15 in(1)
    • 3.938 in(1)
    • 4.921 in(1)
    • 6.299 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 16.0 mm(1)
    • 20.0 mm(1)
    • 25.0 mm(2)
    • 25.401 mm(1)
    • 32.0 mm(2)
    • 35.0 mm(1)
    • 40.0 mm(3)
    • 50.0 mm(2)
    • 50.801 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(1)
    • 125.0 mm(1)
    • 160.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.0 mm(2)
    • 13.976 mm(3)
    • 14.0 mm(12)
    • 15.3 mm(1)
    • 15.351 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.354 in(2)
    • 0.55 in(3)
    • 0.551 in(12)
    • 0.602 in(1)
    • 0.604 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.063 in(1)
    • 1.181 in(1)
    • 1.26 in(1)
    • 1.5 in(1)
    • 1.536 in(2)
    • 1.575 in(6)
    • 1.72 in(1)
    • 1.772 in(1)
    • 1.969 in(3)
    • 2.48 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 27.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(2)
    • 40.0 mm(6)
    • 43.7 mm(1)
    • 45.0 mm(1)
    • 50.0 mm(3)
    • 63.0 mm(2)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (5)
    • B-Cutter Retention Screw (3)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (4)
    • Weldon (6)
    Number of Flutes
    Number of Flutes
    • 12 (1)
    • 2 (5)
    • 3 (3)
    • 4 (4)
    • 5 (3)
    • 6 (1)
    • 8 (1)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(1)
    • 1.575 in(3)
    • 1.772 in(1)
    • 1.969 in(2)
    • 2.047 in(1)
    • 2.48 in(5)
    • 2.953 in(1)
    • 3.228 in(1)
    • 3.781 in(1)
    • 3.938 in(1)
    • 4.0 in(1)
    • 4.331 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(1)
    • 40.0 mm(3)
    • 45.0 mm(1)
    • 50.0 mm(2)
    • 52.0 mm(1)
    • 63.0 mm(5)
    • 75.0 mm(1)
    • 82.0 mm(1)
    • 96.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(1)
    • 110.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(19)
    • 0.031 in(19)
    • 0.047 in(19)
    • 0.063 in(19)
    • 0.066 in(17)
    • 0.079 in(19)
    • 0.098 in(17)
    • 0.125 in(17)
    • 0.157 in(17)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(19)
    • 0.8 mm(19)
    • 1.201 mm(19)
    • 1.6 mm(19)
    • 1.675 mm(17)
    • 2.0 mm(19)
    • 2.5 mm(17)
    • 3.176 mm(17)
    • 4.0 mm(17)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (19)
    • THM-U (17)
    • THR (19)
    • TN2510 (19)
    • TN25M (19)
    • TN450 (19)
    • TN5515 (19)
    • TN6501 (17)
    • TN6502 (17)
    • TN6510 (17)
    • TN6520 (17)
    • TN6525 (17)
    • TN6540 (17)
    • TN7525 (19)
    • TN7535 (19)
    • TTI25 (19)
    • TTM08 (19)
    • TTR (17)
    • WK15CM (19)
    • WK15PM (2)
    • WP35CM (19)
    • WP40PM (17)
    • WS30PM (17)
    • WU20PM (19)
    Rough Finish
    Rough Finish
    • FR (5)
    frontEnd
    Insert Shape
    Insert Shape
    • X-PARALLELOGRAM 80 (19)
    • X-RECTANGLE MILL 4 90 (17)
    • X-RH0MBIC 70 (2)
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (6)
    • SCREW-ON (4)
    • SHELL MILL (9)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(4)
    • 24.375 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 27.0 mm(1)
    • 28.0 mm(3)
    • 32.0 mm(3)
    • 40.0 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.866 in(4)
    • 0.96 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.063 in(1)
    • 1.102 in(3)
    • 1.26 in(3)
    • 1.575 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""

    M680-16 • Nástrčné frézy • Metrické

    (8)M680-16 • Nástrčné frézy • Metrické

    M680-16 • Stopkové frézy se stopkou Weldon® • Metrické

    (3)M680-16 • Stopkové frézy se stopkou Weldon® • Metrické

    M680-16 • Stopkové frézy se závitovou stopkou • Metrické

    (4)M680-16 • Stopkové frézy se závitovou stopkou • Metrické

    M680-16 • Stopkové frézy se stopkou Weldon® • Metrické

    (2)M680-16 • Stopkové frézy se stopkou Weldon® • Metrické

    M680 • Stopka Weldon® • Palcové

    (1)M680 • Stopka Weldon® • Palcové

    M680 • Nástrčné frézy • Palcové

    (1)M680 • Nástrčné frézy • Palcové
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?