Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

Top Drill Modular X Bodies

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (184)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(184)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(184)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(184)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(184)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(184)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(184)
    • M Stainless Steel (184)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(184)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(184)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(184)
    • K Cast Iron (184)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(184)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(184)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(184)
    • N Non-Ferrous Materials (184)
      • N1
        Wrought Aluminum (184)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(184)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(184)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (184)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (184)
      • N6
        Carbon, Graphite Composites, CFRP (184)
      • N7
        MMC's (184)
    • S High-Temp Alloys (184)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(184)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(184)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(184)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(184)
    Select All Star
    • CN (22)
    • DE (28)
    • GB (4)
    • IN (1)
    • SG (26)
    • US (10)
    Applications
    Applications
    • Convex DrillingConvex Drilling (184)
    • DrillingDrilling (184)
    • Inclined Entry DrillingInclined Entry Drilling (184)
    • Inclined Exit DrillingInclined Exit Drilling (184)
    • Stacked Plates DrillingStacked Plates Drilling (184)
    Cutting Diameter
    Cutting Diameter
    • 0.63 in(10)
    • 0.638 in(10)
    • 0.641 in(10)
    • 0.65 in(10)
    • 0.656 in(10)
    • 0.669 in(10)
    • 0.672 in(10)
    • 0.689 in(10)
    • 0.69 in(10)
    • 0.694 in(10)
    • 0.702 in(10)
    • 0.704 in(10)
    • 0.709 in(10)
    • 0.719 in(10)
    • 0.728 in(10)
    • 0.734 in(10)
    • 0.74 in(10)
    • 0.748 in(10)
    • 0.75 in(10)
    • 0.756 in(10)
    • 0.759 in(10)
    • 0.766 in(10)
    • 0.768 in(10)
    • 0.776 in(10)
    • 0.781 in(10)
    • 0.787 in(10)
    • 0.791 in(10)
    • 0.795 in(10)
    • 0.797 in(10)
    • 0.799 in(10)
    • 0.803 in(10)
    • 0.807 in(10)
    • 0.811 in(10)
    • 0.814 in(10)
    • 0.816 in(10)
    • 0.82 in(10)
    • 0.824 in(10)
    • 0.828 in(10)
    • 0.844 in(10)
    • 0.846 in(10)
    • 0.866 in(10)
    • 0.875 in(10)
    • 0.884 in(10)
    • 0.886 in(10)
    • 0.906 in(10)
    • 0.925 in(10)
    • 0.937 in(10)
    • 0.946 in(10)
    • 0.965 in(10)
    • 0.969 in(10)
    • 0.984 in(10)
    • 1.0 in(10)
    • 1.004 in(10)
    • 1.012 in(10)
    • 1.014 in(10)
    • 1.016 in(10)
    • 1.024 in(10)
    • 1.032 in(10)
    • 1.039 in(10)
    • 1.043 in(10)
    • 1.047 in(10)
    • 1.063 in(10)
    • 1.083 in(10)
    • 1.094 in(10)
    • 1.102 in(10)
    • 1.109 in(10)
    • 1.122 in(10)
    • 1.125 in(10)
    • 1.143 in(10)
    • 1.156 in(10)
    • 1.161 in(10)
    • 1.172 in(10)
    • 1.181 in(10)
    • 1.188 in(10)
    • 1.201 in(10)
    • 1.219 in(10)
    • 1.22 in(10)
    • 1.24 in(10)
    • 1.25 in(10)
    • 1.26 in(6)
    • 1.28 in(6)
    • 1.299 in(6)
    • 1.313 in(6)
    • 1.339 in(6)
    • 1.344 in(6)
    • 1.375 in(6)
    • 1.379 in(6)
    • 1.399 in(6)
    • 1.417 in(6)
    • 1.437 in(6)
    • 1.457 in(6)
    • 1.476 in(6)
    • 1.496 in(6)
    • 1.5 in(6)
    • 1.508 in(6)
    • 1.516 in(6)
    • 1.536 in(6)
    • 1.547 in(6)
    • 1.555 in(6)
    • 1.575 in(6)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 16.0 mm(10)
    • 16.2 mm(10)
    • 16.276 mm(10)
    • 16.5 mm(10)
    • 16.675 mm(10)
    • 17.0 mm(10)
    • 17.075 mm(10)
    • 17.475 mm(10)
    • 17.5 mm(10)
    • 17.6 mm(10)
    • 17.8 mm(10)
    • 17.85 mm(10)
    • 18.0 mm(10)
    • 18.25 mm(10)
    • 18.5 mm(10)
    • 18.651 mm(10)
    • 18.8 mm(10)
    • 19.0 mm(10)
    • 19.05 mm(10)
    • 19.201 mm(10)
    • 19.276 mm(10)
    • 19.451 mm(10)
    • 19.5 mm(10)
    • 19.701 mm(10)
    • 19.85 mm(10)
    • 20.0 mm(10)
    • 20.1 mm(10)
    • 20.201 mm(10)
    • 20.25 mm(10)
    • 20.3 mm(10)
    • 20.401 mm(10)
    • 20.5 mm(10)
    • 20.6 mm(10)
    • 20.651 mm(10)
    • 20.701 mm(10)
    • 20.8 mm(10)
    • 20.901 mm(10)
    • 21.0 mm(10)
    • 21.425 mm(10)
    • 21.5 mm(10)
    • 22.0 mm(10)
    • 22.225 mm(10)
    • 22.451 mm(10)
    • 22.5 mm(10)
    • 23.0 mm(10)
    • 23.5 mm(10)
    • 23.8 mm(10)
    • 24.0 mm(10)
    • 24.5 mm(10)
    • 24.6 mm(10)
    • 25.0 mm(10)
    • 25.401 mm(10)
    • 25.5 mm(10)
    • 25.675 mm(10)
    • 25.701 mm(10)
    • 25.75 mm(10)
    • 25.8 mm(10)
    • 26.0 mm(10)
    • 26.201 mm(10)
    • 26.401 mm(10)
    • 26.5 mm(10)
    • 26.6 mm(10)
    • 27.0 mm(10)
    • 27.5 mm(10)
    • 27.776 mm(10)
    • 28.0 mm(10)
    • 28.175 mm(10)
    • 28.5 mm(10)
    • 28.576 mm(10)
    • 29.0 mm(10)
    • 29.375 mm(10)
    • 29.5 mm(10)
    • 29.776 mm(10)
    • 30.0 mm(10)
    • 30.175 mm(10)
    • 30.5 mm(10)
    • 30.951 mm(10)
    • 31.0 mm(10)
    • 31.5 mm(10)
    • 31.75 mm(10)
    • 32.0 mm(6)
    • 32.5 mm(6)
    • 33.0 mm(6)
    • 33.35 mm(6)
    • 34.0 mm(6)
    • 34.125 mm(6)
    • 34.926 mm(6)
    • 35.0 mm(6)
    • 35.5 mm(6)
    • 36.0 mm(6)
    • 36.5 mm(6)
    • 37.0 mm(6)
    • 37.5 mm(6)
    • 38.0 mm(6)
    • 38.1 mm(6)
    • 38.301 mm(6)
    • 38.5 mm(6)
    • 39.0 mm(6)
    • 39.301 mm(6)
    • 39.5 mm(6)
    • 40.0 mm(6)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 26.0 mm(2)
    • 27.0 mm(2)
    • 29.0 mm(2)
    • 30.0 mm(2)
    • 32.0 mm(2)
    • 33.0 mm(2)
    • 35.0 mm(2)
    • 36.0 mm(2)
    • 38.0 mm(2)
    • 39.0 mm(2)
    • 41.0 mm(2)
    • 42.0 mm(2)
    • 44.0 mm(2)
    • 45.0 mm(2)
    • 47.0 mm(2)
    • 48.0 mm(2)
    • 51.0 mm(2)
    • 54.0 mm(2)
    • 57.0 mm(2)
    • 60.0 mm(2)
    • 63.0 mm(2)
    • 66.0 mm(2)
    • 69.0 mm(2)
    • 72.0 mm(2)
    • 75.0 mm(2)
    • 78.0 mm(2)
    • 81.0 mm(2)
    • 84.0 mm(2)
    • 85.0 mm(2)
    • 87.0 mm(2)
    • 90.0 mm(4)
    • 93.0 mm(2)
    • 95.0 mm(2)
    • 96.0 mm(2)
    • 100.0 mm(2)
    • 102.0 mm(2)
    • 105.0 mm(2)
    • 108.0 mm(2)
    • 110.0 mm(2)
    • 114.0 mm(2)
    • 115.0 mm(2)
    • 120.0 mm(4)
    • 125.0 mm(2)
    • 130.0 mm(2)
    • 135.0 mm(2)
    • 136.0 mm(2)
    • 140.0 mm(2)
    • 144.0 mm(2)
    • 145.0 mm(2)
    • 150.0 mm(2)
    • 152.0 mm(2)
    • 155.0 mm(2)
    • 160.0 mm(4)
    • 168.0 mm(2)
    • 170.0 mm(2)
    • 176.0 mm(2)
    • 180.0 mm(2)
    • 184.0 mm(2)
    • 190.0 mm(2)
    • 192.0 mm(2)
    • 200.0 mm(4)
    • 204.0 mm(2)
    • 208.0 mm(2)
    • 216.0 mm(4)
    • 224.0 mm(2)
    • 228.0 mm(2)
    • 232.0 mm(2)
    • 240.0 mm(4)
    • 248.0 mm(2)
    • 252.0 mm(2)
    • 256.0 mm(2)
    • 264.0 mm(2)
    • 272.0 mm(2)
    • 276.0 mm(2)
    • 288.0 mm(4)
    • 300.0 mm(2)
    • 304.0 mm(2)
    • 312.0 mm(2)
    • 320.0 mm(2)
    • 324.0 mm(2)
    • 336.0 mm(2)
    • 348.0 mm(2)
    • 360.0 mm(2)
    • 372.0 mm(2)
    • 384.0 mm(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.024 in(2)
    • 1.063 in(2)
    • 1.143 in(2)
    • 1.181 in(2)
    • 1.26 in(2)
    • 1.299 in(2)
    • 1.379 in(2)
    • 1.417 in(2)
    • 1.496 in(2)
    • 1.536 in(2)
    • 1.614 in(2)
    • 1.655 in(2)
    • 1.732 in(2)
    • 1.772 in(2)
    • 1.85 in(2)
    • 1.891 in(2)
    • 2.008 in(2)
    • 2.126 in(2)
    • 2.244 in(2)
    • 2.362 in(2)
    • 2.48 in(2)
    • 2.598 in(2)
    • 2.717 in(2)
    • 2.835 in(2)
    • 2.953 in(2)
    • 3.071 in(2)
    • 3.189 in(2)
    • 3.307 in(2)
    • 3.346 in(2)
    • 3.426 in(2)
    • 3.543 in(4)
    • 3.661 in(2)
    • 3.74 in(2)
    • 3.781 in(2)
    • 3.938 in(2)
    • 4.016 in(2)
    • 4.134 in(2)
    • 4.252 in(2)
    • 4.331 in(2)
    • 4.488 in(2)
    • 4.529 in(2)
    • 4.724 in(4)
    • 4.921 in(2)
    • 5.118 in(2)
    • 5.315 in(2)
    • 5.354 in(2)
    • 5.513 in(2)
    • 5.67 in(2)
    • 5.71 in(2)
    • 5.906 in(2)
    • 5.984 in(2)
    • 6.102 in(2)
    • 6.299 in(4)
    • 6.614 in(2)
    • 6.694 in(2)
    • 6.929 in(2)
    • 7.087 in(2)
    • 7.244 in(2)
    • 7.48 in(2)
    • 7.559 in(2)
    • 7.875 in(4)
    • 8.031 in(2)
    • 8.189 in(2)
    • 8.504 in(4)
    • 8.819 in(2)
    • 8.976 in(2)
    • 9.134 in(2)
    • 9.449 in(4)
    • 9.764 in(2)
    • 9.921 in(2)
    • 10.079 in(2)
    • 10.394 in(2)
    • 10.709 in(2)
    • 10.866 in(2)
    • 11.339 in(4)
    • 11.811 in(2)
    • 11.969 in(2)
    • 12.283 in(2)
    • 12.598 in(2)
    • 12.756 in(2)
    • 13.228 in(2)
    • 13.701 in(2)
    • 14.173 in(2)
    • 14.646 in(2)
    • 15.118 in(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Connection Style
    Connection Style
    • Cylindrical Shank 1 Flat (152)
    • Straight-Cylindrical w/Flange (32)
    Over All Length [L]
    Over All Length [L]
    • 4.173 in(2)
    • 4.291 in(2)
    • 4.646 in(2)
    • 4.764 in(2)
    • 4.882 in(2)
    • 5.0 in(2)
    • 5.118 in(2)
    • 5.157 in(2)
    • 5.236 in(2)
    • 5.354 in(2)
    • 5.513 in(2)
    • 5.63 in(2)
    • 5.748 in(4)
    • 5.867 in(2)
    • 5.945 in(2)
    • 5.984 in(2)
    • 6.102 in(4)
    • 6.22 in(2)
    • 6.299 in(2)
    • 6.339 in(2)
    • 6.457 in(2)
    • 6.496 in(2)
    • 6.654 in(2)
    • 6.772 in(2)
    • 6.969 in(2)
    • 7.165 in(2)
    • 7.244 in(2)
    • 7.323 in(2)
    • 7.521 in(4)
    • 7.678 in(2)
    • 7.756 in(2)
    • 7.875 in(2)
    • 8.031 in(4)
    • 8.228 in(2)
    • 8.268 in(2)
    • 8.504 in(2)
    • 8.544 in(2)
    • 8.898 in(2)
    • 8.937 in(2)
    • 8.976 in(2)
    • 9.214 in(2)
    • 9.331 in(2)
    • 9.449 in(2)
    • 9.488 in(2)
    • 9.685 in(2)
    • 9.724 in(2)
    • 9.882 in(2)
    • 9.961 in(2)
    • 10.039 in(2)
    • 10.236 in(4)
    • 10.472 in(2)
    • 10.63 in(2)
    • 10.749 in(2)
    • 10.984 in(2)
    • 11.182 in(2)
    • 11.378 in(2)
    • 11.654 in(2)
    • 11.733 in(2)
    • 11.89 in(2)
    • 12.166 in(2)
    • 12.283 in(2)
    • 12.48 in(2)
    • 12.638 in(2)
    • 12.677 in(2)
    • 13.031 in(4)
    • 13.189 in(2)
    • 13.387 in(2)
    • 13.544 in(2)
    • 13.781 in(2)
    • 14.094 in(2)
    • 14.134 in(2)
    • 14.528 in(2)
    • 14.606 in(2)
    • 15.157 in(2)
    • 15.669 in(2)
    • 15.827 in(2)
    • 16.378 in(2)
    • 16.417 in(2)
    • 16.89 in(2)
    • 17.165 in(2)
    • 17.441 in(2)
    • 17.913 in(2)
    • 17.953 in(2)
    • 18.504 in(2)
    • 19.017 in(2)
    • 19.567 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 106.0 mm(2)
    • 109.0 mm(2)
    • 118.0 mm(2)
    • 121.0 mm(2)
    • 124.0 mm(2)
    • 127.0 mm(2)
    • 130.0 mm(2)
    • 131.0 mm(2)
    • 133.0 mm(2)
    • 136.0 mm(2)
    • 140.0 mm(2)
    • 143.0 mm(2)
    • 146.0 mm(4)
    • 149.0 mm(2)
    • 151.0 mm(2)
    • 152.0 mm(2)
    • 155.0 mm(4)
    • 158.0 mm(2)
    • 160.0 mm(2)
    • 161.0 mm(2)
    • 164.0 mm(2)
    • 165.0 mm(2)
    • 169.0 mm(2)
    • 172.0 mm(2)
    • 177.0 mm(2)
    • 182.0 mm(2)
    • 184.0 mm(2)
    • 186.0 mm(2)
    • 191.0 mm(4)
    • 195.0 mm(2)
    • 197.0 mm(2)
    • 200.0 mm(2)
    • 204.0 mm(4)
    • 209.0 mm(2)
    • 210.0 mm(2)
    • 216.0 mm(2)
    • 217.0 mm(2)
    • 226.0 mm(2)
    • 227.0 mm(2)
    • 228.0 mm(2)
    • 234.0 mm(2)
    • 237.0 mm(2)
    • 240.0 mm(2)
    • 241.0 mm(2)
    • 246.0 mm(2)
    • 247.0 mm(2)
    • 251.0 mm(2)
    • 253.0 mm(2)
    • 255.0 mm(2)
    • 260.0 mm(4)
    • 266.0 mm(2)
    • 270.0 mm(2)
    • 273.0 mm(2)
    • 279.0 mm(2)
    • 284.0 mm(2)
    • 289.0 mm(2)
    • 296.0 mm(2)
    • 298.0 mm(2)
    • 302.0 mm(2)
    • 309.0 mm(2)
    • 312.0 mm(2)
    • 317.0 mm(2)
    • 321.0 mm(2)
    • 322.0 mm(2)
    • 331.0 mm(4)
    • 335.0 mm(2)
    • 340.0 mm(2)
    • 344.0 mm(2)
    • 350.0 mm(2)
    • 358.0 mm(2)
    • 359.0 mm(2)
    • 369.0 mm(2)
    • 371.0 mm(2)
    • 385.0 mm(2)
    • 398.0 mm(2)
    • 402.0 mm(2)
    • 416.0 mm(2)
    • 417.0 mm(2)
    • 429.0 mm(2)
    • 436.0 mm(2)
    • 443.0 mm(2)
    • 455.0 mm(2)
    • 456.0 mm(2)
    • 470.0 mm(2)
    • 483.0 mm(2)
    • 497.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WM15PD (184)
    • WP40PD (184)
    frontEnd
    Point Angle
    Point Angle
    • 140.0 (184)
    • 150.0 (184)
    Point Angle MinkomuPoint Angle Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(10)
    • 20.0 mm(10)
    • 25.0 mm(30)
    • 25.401 mm(30)
    • 31.75 mm(40)
    • 32.0 mm(40)
    • 38.1 mm(12)
    • 40.0 mm(12)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(10)
    • 0.787 in(10)
    • 0.984 in(30)
    • 1.0 in(30)
    • 1.25 in(40)
    • 1.26 in(40)
    • 1.5 in(12)
    • 1.575 in(12)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Inch
    (20)

    TOP DRILL™ Modular X • 3 x D • Side Lock Shank • Inch

    TOP DRILL™ Modular X • 3 x D • Boční bezpečnostní adaptér S • Metrické
    (20)

    TOP DRILL™ Modular X • 3 x D • Boční bezpečnostní adaptér S • Metrické

    TOP DRILL™ Modular X • 5 x D • Side Lock Shank • Inch
    (20)

    TOP DRILL™ Modular X • 5 x D • Side Lock Shank • Inch

    TOP DRILL™ Modular X • 5 x D • Boční bezpečnostní adaptér S • Metrické
    (20)

    TOP DRILL™ Modular X • 5 x D • Boční bezpečnostní adaptér S • Metrické

    TOP DRILL™ Modular X • 8 x D • Boční bezpečnostní adaptér S • Metrické
    (20)

    TOP DRILL™ Modular X • 8 x D • Boční bezpečnostní adaptér S • Metrické

    TOP DRILL™ Modular X • 8 x D • Side Lock Shank • Inch
    (20)

    TOP DRILL™ Modular X • 8 x D • Side Lock Shank • Inch

    TOP DRILL™ Modular X • 1.5 x D • Side Lock Shank • Inch
    (16)

    TOP DRILL™ Modular X • 1.5 x D • Side Lock Shank • Inch

    TOP DRILL™ Modular X • 1,5 x D • Boční bezpečnostní adaptér S • Metrické
    (16)

    TOP DRILL™ Modular X • 1,5 x D • Boční bezpečnostní adaptér S • Metrické

    TOP DRILL™ Modular X • 12 x D • Přírubová válcová stopka • Metrické
    (16)

    TOP DRILL™ Modular X • 12 x D • Přírubová válcová stopka • Metrické

    TOP DRILL™ Modular X • 12 x D • Flanged Round Shank • Inch
    (16)

    TOP DRILL™ Modular X • 12 x D • Flanged Round Shank • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?