フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1)
    • M Stainless Steel (1)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1)
    • K Cast Iron (1)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1)
    • N Non-Ferrous Materials (1)
      • N1
        Wrought Aluminum (1)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(1)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
      • N6
        Carbon, Graphite Composites, CFRP (1)
      • N7
        MMC's (1)
    • S High-Temp Alloys (1)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
    • H Hardened Materials (1)
      • H1
        Hardened Materials 44-48 HRC(1)
      • H2
        Hardened Materials 48-55 HRC(1)
      • H3
        Hardened Materials 56-60 HRC(1)
      • H4
        Hardened Materials >60 HRC(1)
    Applications
    Applications
    • GroovingGrooving (1)
    • ID GroovingID Grooving (1)
    • ID Thread TurningID Thread Turning (1)
    • ThreadingThreading (1)
    Type of Thread
    Type of Thread
    • 60 (1)
    • BUTTRESS (1)
    • UN (1)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1)
    • Lightly Interrupted Cut (1)
    • Smooth Cut (1)
    • Varying Depth of Cut (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (1)
    • 2.0 (1)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(1)
    • 0.004 in(1)
    • 0.008 in(1)
    • 0.02 in(1)
    • 0.03 in(1)
    • 0.031 in(1)
    • 0.039 in(1)
    • 0.047 in(1)
    • 0.049 in(1)
    • 0.059 in(1)
    • 0.063 in(1)
    • 0.069 in(1)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.075 mm(1)
    • 0.1 mm(1)
    • 0.2 mm(1)
    • 0.5 mm(1)
    • 0.75 mm(1)
    • 0.775 mm(1)
    • 1.0 mm(1)
    • 1.2 mm(1)
    • 1.25 mm(1)
    • 1.5 mm(1)
    • 1.6 mm(1)
    • 1.75 mm(1)
    Corner Radius MintoCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (1)
    • K420 (1)
    • K68 (1)
    • KC5010 (1)
    • KC5025 (1)
    • KC5410 (1)
    • KC720 (1)
    • KC730 (1)
    • KC850 (1)
    • KCK20 (1)
    • KCK20B (1)
    • KCP10B (1)
    • KCP25B (1)
    • KCU10 (1)
    • KCU10B (1)
    • KCU25 (1)
    • KCU25B (1)
    • THM (1)
    • TN6010 (1)
    • TN6025 (1)
    • WU10PT (1)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.0197 in(1)
    • 0.031 in(1)
    • 0.0315 in(1)
    • 0.039 in(1)
    • 0.0394 in(1)
    • 0.041 in(1)
    • 0.047 in(1)
    • 0.0472 in(1)
    • 0.055 in(1)
    • 0.0551 in(1)
    • 0.058 in(1)
    • 0.0591 in(1)
    • 0.062 in(1)
    • 0.0669 in(1)
    • 0.067 in(1)
    • 0.0689 in(1)
    • 0.076 in(1)
    • 0.0768 in(1)
    • 0.077 in(1)
    • 0.0787 in(1)
    • 0.079 in(1)
    • 0.0866 in(1)
    • 0.088 in(1)
    • 0.0886 in(1)
    • 0.094 in(1)
    • 0.0984 in(1)
    • 0.108 in(1)
    • 0.1083 in(1)
    • 0.1181 in(1)
    • 0.125 in(1)
    • 0.1278 in(1)
    • 0.129 in(1)
    • 0.1378 in(1)
    • 0.151 in(1)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(1)
    • 0.787 mm(1)
    • 0.8 mm(1)
    • 0.991 mm(1)
    • 1.0 mm(1)
    • 1.041 mm(1)
    • 1.19 mm(1)
    • 1.194 mm(1)
    • 1.2 mm(1)
    • 1.39 mm(1)
    • 1.4 mm(1)
    • 1.473 mm(1)
    • 1.5 mm(1)
    • 1.57 mm(1)
    • 1.575 mm(1)
    • 1.7 mm(1)
    • 1.702 mm(1)
    • 1.75 mm(1)
    • 1.94 mm(1)
    • 1.95 mm(1)
    • 1.956 mm(1)
    • 2.0 mm(1)
    • 2.007 mm(1)
    • 2.2 mm(1)
    • 2.24 mm(1)
    • 2.25 mm(1)
    • 2.388 mm(1)
    • 2.5 mm(1)
    • 2.74 mm(1)
    • 2.75 mm(1)
    • 3.0 mm(1)
    • 3.175 mm(1)
    • 3.18 mm(1)
    • 3.245 mm(1)
    • 3.27 mm(1)
    • 3.5 mm(1)
    • 3.84 mm(1)
    Cutting Width MintoCutting Width Max
    No filters matching ""
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO製品型番 材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)