モジュラーの安定性
安定したモジュラードリル加工プラットフォームに、3種類のインサート形状を加えることで、各種アプリケーションを加工することが可能です。
TDMXは、クロスホール、傾斜した入口部／出口部、断続切削など、困難なドリル加工アプリケーションにおいて最大の安定性を確保するために、堅牢なポケットシート設計を採用しています。
ようこそ
設定をご確認ください
設定の更新
提案製品
Product Family suggestions
製品の特長：
- Xポケットシート設計が要求度の高いアプリケーションにおける安定性を向上
- 0.629"～1.574"（16 mm～40 mm）のインサート径範囲
- 本体全体に施されたマージンランドによって、真直度と加工穴の品質を確保
- 切り屑排出性の改善
- 切れ刃の後ろに配置されたクーラントチャンネル出口
- フランジ付きシャンクにより、剛性を向上
- フルートの研磨により、切り屑除去率を向上
- テーパーインサートシートZ軸
- 被削材別のアプリケーションに合わせて設計された材種
- 3倍の再研磨が可能
- 前部クランプ設計により、インサート交換時にホルダーから本体を取り外すことなく、本体から容易に取り外し可能
0:00
0:00 / 1:15
Email Link
Wrong email addressPrimary Email Address*Add Another Email AddressWrong email addressFrom*Message
CancelSend Email
Get Embed Code
To get embed code, copy and paste: Embed Size640x480
CancelSelect All
Share Link
To share this link, copy and paste:
CancelSelect All
フィルタを選択
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
- P Steel (335)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(335)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(335)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(335)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(335)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(335)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(335)
- M Stainless Steel (434)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(434)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(434)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(434)
- K Cast Iron (434)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(434)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(434)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(434)
- N Non-Ferrous Materials (280)
- N1Wrought Aluminum (280)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(280)
- N3High-Silicon Aluminum Alloys Si >12.2%(280)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (280)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (280)
- N6Carbon, Graphite Composites, CFRP (280)
- N7MMC's (280)
- S High-Temp Alloys (334)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(334)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(334)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(334)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(334)
Select All Star
- CN (44)
- DE (52)
- GB (5)
- IN (4)
- SG (49)
- US (31)
Applications
Applications
Convex Drilling (181)
Drilling (181)
Inclined Entry Drilling (181)
Inclined Exit Drilling (181)
Stacked Plates Drilling (181)
=
Cutting Diameter
Cutting Diameter
- 0.63 in(13)
- 0.638 in(12)
- 0.641 in(13)
- 0.65 in(13)
- 0.656 in(13)
- 0.669 in(13)
- 0.672 in(13)
- 0.689 in(12)
- 0.69 in(13)
- 0.694 in(12)
- 0.702 in(12)
- 0.704 in(12)
- 0.709 in(13)
- 0.719 in(12)
- 0.728 in(13)
- 0.734 in(12)
- 0.74 in(12)
- 0.748 in(13)
- 0.75 in(13)
- 0.756 in(12)
- 0.759 in(12)
- 0.766 in(12)
- 0.768 in(13)
- 0.776 in(12)
- 0.781 in(13)
- 0.787 in(13)
- 0.791 in(12)
- 0.795 in(12)
- 0.797 in(12)
- 0.799 in(12)
- 0.803 in(12)
- 0.807 in(13)
- 0.811 in(12)
- 0.814 in(12)
- 0.816 in(12)
- 0.82 in(12)
- 0.824 in(12)
- 0.828 in(13)
- 0.844 in(12)
- 0.846 in(13)
- 0.866 in(13)
- 0.875 in(12)
- 0.884 in(12)
- 0.886 in(13)
- 0.906 in(12)
- 0.925 in(12)
- 0.937 in(11)
- 0.946 in(12)
- 0.965 in(12)
- 0.969 in(11)
- 0.984 in(13)
- 1.0 in(13)
- 1.004 in(13)
- 1.012 in(14)
- 1.014 in(11)
- 1.016 in(12)
- 1.024 in(13)
- 1.032 in(12)
- 1.039 in(13)
- 1.043 in(13)
- 1.047 in(12)
- 1.063 in(13)
- 1.083 in(13)
- 1.094 in(12)
- 1.102 in(13)
- 1.109 in(12)
- 1.122 in(13)
- 1.125 in(12)
- 1.143 in(12)
- 1.156 in(11)
- 1.161 in(12)
- 1.172 in(11)
- 1.181 in(13)
- 1.188 in(12)
- 1.201 in(13)
- 1.219 in(12)
- 1.22 in(13)
- 1.24 in(13)
- 1.25 in(13)
- 1.26 in(9)
- 1.28 in(8)
- 1.299 in(9)
- 1.313 in(8)
- 1.339 in(9)
- 1.344 in(8)
- 1.375 in(8)
- 1.379 in(9)
- 1.399 in(9)
- 1.417 in(9)
- 1.437 in(9)
- 1.457 in(9)
- 1.476 in(9)
- 1.496 in(9)
- 1.5 in(9)
- 1.508 in(7)
- 1.516 in(9)
- 1.536 in(9)
- 1.547 in(7)
- 1.555 in(8)
- 1.575 in(9)
Cutting Diameter Min値を入力toCutting Diameter MaxCutting Diameter
=
Cutting Diameter
Cutting Diameter
- 16.0 mm(13)
- 16.2 mm(12)
- 16.276 mm(13)
- 16.5 mm(13)
- 16.675 mm(13)
- 17.0 mm(13)
- 17.075 mm(13)
- 17.475 mm(12)
- 17.5 mm(13)
- 17.6 mm(12)
- 17.8 mm(12)
- 17.85 mm(12)
- 18.0 mm(13)
- 18.25 mm(12)
- 18.5 mm(13)
- 18.651 mm(12)
- 18.8 mm(12)
- 19.0 mm(13)
- 19.05 mm(13)
- 19.201 mm(12)
- 19.276 mm(12)
- 19.451 mm(12)
- 19.5 mm(13)
- 19.701 mm(12)
- 19.85 mm(13)
- 20.0 mm(13)
- 20.1 mm(12)
- 20.201 mm(12)
- 20.25 mm(12)
- 20.3 mm(12)
- 20.401 mm(12)
- 20.5 mm(13)
- 20.6 mm(12)
- 20.651 mm(12)
- 20.701 mm(12)
- 20.8 mm(12)
- 20.901 mm(12)
- 21.0 mm(13)
- 21.425 mm(12)
- 21.5 mm(13)
- 22.0 mm(13)
- 22.225 mm(12)
- 22.451 mm(12)
- 22.5 mm(13)
- 23.0 mm(12)
- 23.5 mm(12)
- 23.8 mm(11)
- 24.0 mm(12)
- 24.5 mm(12)
- 24.6 mm(11)
- 25.0 mm(13)
- 25.401 mm(13)
- 25.5 mm(13)
- 25.675 mm(12)
- 25.701 mm(12)
- 25.75 mm(11)
- 25.8 mm(12)
- 26.0 mm(13)
- 26.201 mm(12)
- 26.401 mm(13)
- 26.5 mm(13)
- 26.6 mm(12)
- 27.0 mm(13)
- 27.5 mm(13)
- 27.776 mm(12)
- 28.0 mm(13)
- 28.175 mm(12)
- 28.5 mm(13)
- 28.576 mm(12)
- 29.0 mm(12)
- 29.375 mm(11)
- 29.5 mm(12)
- 29.776 mm(11)
- 30.0 mm(13)
- 30.175 mm(12)
- 30.5 mm(13)
- 30.951 mm(12)
- 31.0 mm(13)
- 31.5 mm(13)
- 31.75 mm(13)
- 32.0 mm(9)
- 32.5 mm(8)
- 33.0 mm(9)
- 33.35 mm(8)
- 34.0 mm(9)
- 34.125 mm(8)
- 34.926 mm(8)
- 35.0 mm(9)
- 35.5 mm(9)
- 36.0 mm(9)
- 36.5 mm(9)
- 37.0 mm(9)
- 37.5 mm(9)
- 38.0 mm(9)
- 38.1 mm(9)
- 38.301 mm(7)
- 38.5 mm(9)
- 39.0 mm(9)
- 39.301 mm(7)
- 39.5 mm(8)
- 40.0 mm(9)
Cutting Diameter Min値を入力toCutting Diameter MaxCutting Diameter
=
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 26.0 mm(2)
- 27.0 mm(2)
- 29.0 mm(2)
- 30.0 mm(2)
- 32.0 mm(2)
- 33.0 mm(2)
- 35.0 mm(2)
- 36.0 mm(2)
- 38.0 mm(1)
- 39.0 mm(2)
- 41.0 mm(2)
- 42.0 mm(2)
- 44.0 mm(2)
- 45.0 mm(2)
- 47.0 mm(2)
- 48.0 mm(2)
- 51.0 mm(2)
- 54.0 mm(2)
- 57.0 mm(2)
- 60.0 mm(2)
- 63.0 mm(2)
- 66.0 mm(2)
- 69.0 mm(2)
- 72.0 mm(2)
- 75.0 mm(2)
- 78.0 mm(2)
- 81.0 mm(2)
- 84.0 mm(2)
- 85.0 mm(2)
- 87.0 mm(2)
- 90.0 mm(4)
- 93.0 mm(2)
- 95.0 mm(2)
- 96.0 mm(2)
- 100.0 mm(2)
- 102.0 mm(2)
- 105.0 mm(2)
- 108.0 mm(2)
- 110.0 mm(2)
- 114.0 mm(2)
- 115.0 mm(2)
- 120.0 mm(4)
- 125.0 mm(2)
- 130.0 mm(2)
- 135.0 mm(2)
- 136.0 mm(2)
- 140.0 mm(2)
- 144.0 mm(2)
- 145.0 mm(2)
- 150.0 mm(2)
- 152.0 mm(2)
- 155.0 mm(2)
- 160.0 mm(4)
- 168.0 mm(2)
- 170.0 mm(2)
- 176.0 mm(2)
- 180.0 mm(2)
- 184.0 mm(2)
- 190.0 mm(2)
- 192.0 mm(2)
- 200.0 mm(4)
- 204.0 mm(2)
- 208.0 mm(2)
- 216.0 mm(4)
- 224.0 mm(2)
- 228.0 mm(2)
- 232.0 mm(2)
- 240.0 mm(4)
- 248.0 mm(2)
- 252.0 mm(2)
- 256.0 mm(2)
- 264.0 mm(2)
- 272.0 mm(2)
- 276.0 mm(2)
- 288.0 mm(3)
- 300.0 mm(2)
- 304.0 mm(2)
- 312.0 mm(2)
- 320.0 mm(2)
- 324.0 mm(2)
- 336.0 mm(2)
- 348.0 mm(2)
- 360.0 mm(1)
- 372.0 mm(2)
- 384.0 mm(2)
Maximum Hole Depth [L4] Min値を入力toMaximum Hole Depth [L4] MaxMaximum Hole Depth [L4]
=
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.024 in(2)
- 1.063 in(2)
- 1.143 in(2)
- 1.181 in(2)
- 1.26 in(2)
- 1.299 in(2)
- 1.379 in(2)
- 1.417 in(2)
- 1.496 in(1)
- 1.536 in(2)
- 1.614 in(2)
- 1.655 in(2)
- 1.732 in(2)
- 1.772 in(2)
- 1.85 in(2)
- 1.891 in(2)
- 2.008 in(2)
- 2.126 in(2)
- 2.244 in(2)
- 2.362 in(2)
- 2.48 in(2)
- 2.598 in(2)
- 2.717 in(2)
- 2.835 in(2)
- 2.953 in(2)
- 3.071 in(2)
- 3.189 in(2)
- 3.307 in(2)
- 3.346 in(2)
- 3.426 in(2)
- 3.543 in(4)
- 3.661 in(2)
- 3.74 in(2)
- 3.781 in(2)
- 3.938 in(2)
- 4.016 in(2)
- 4.134 in(2)
- 4.252 in(2)
- 4.331 in(2)
- 4.488 in(2)
- 4.529 in(2)
- 4.724 in(4)
- 4.921 in(2)
- 5.118 in(2)
- 5.315 in(2)
- 5.354 in(2)
- 5.513 in(2)
- 5.67 in(2)
- 5.71 in(2)
- 5.906 in(2)
- 5.984 in(2)
- 6.102 in(2)
- 6.299 in(4)
- 6.614 in(2)
- 6.694 in(2)
- 6.929 in(2)
- 7.087 in(2)
- 7.244 in(2)
- 7.48 in(2)
- 7.559 in(2)
- 7.875 in(4)
- 8.031 in(2)
- 8.189 in(2)
- 8.504 in(4)
- 8.819 in(2)
- 8.976 in(2)
- 9.134 in(2)
- 9.449 in(4)
- 9.764 in(2)
- 9.921 in(2)
- 10.079 in(2)
- 10.394 in(2)
- 10.709 in(2)
- 10.866 in(2)
- 11.339 in(3)
- 11.811 in(2)
- 11.969 in(2)
- 12.283 in(2)
- 12.598 in(2)
- 12.756 in(2)
- 13.228 in(2)
- 13.701 in(2)
- 14.173 in(1)
- 14.646 in(2)
- 15.118 in(2)
Maximum Hole Depth [L4] Min値を入力toMaximum Hole Depth [L4] MaxMaximum Hole Depth [L4]
Connection Style
Connection Style
- Cylindrical Shank 1 Flat (151)
- Straight-Cylindrical w/Flange (30)
Number of Flutes
Number of Flutes
- 2 (181)
Internal Coolant Capability
Internal Coolant Capability
=
Over All Length [L]
Over All Length [L]
- 4.173 in(2)
- 4.291 in(2)
- 4.646 in(2)
- 4.764 in(2)
- 4.882 in(2)
- 5.0 in(2)
- 5.118 in(2)
- 5.157 in(2)
- 5.236 in(2)
- 5.354 in(2)
- 5.513 in(1)
- 5.63 in(2)
- 5.748 in(4)
- 5.867 in(2)
- 5.945 in(2)
- 5.984 in(2)
- 6.102 in(4)
- 6.22 in(2)
- 6.299 in(2)
- 6.339 in(2)
- 6.457 in(2)
- 6.496 in(2)
- 6.654 in(2)
- 6.772 in(2)
- 6.969 in(2)
- 7.165 in(2)
- 7.244 in(2)
- 7.323 in(2)
- 7.521 in(4)
- 7.678 in(2)
- 7.756 in(2)
- 7.875 in(2)
- 8.031 in(4)
- 8.228 in(2)
- 8.268 in(2)
- 8.504 in(2)
- 8.544 in(2)
- 8.898 in(2)
- 8.937 in(2)
- 8.976 in(2)
- 9.214 in(2)
- 9.331 in(2)
- 9.449 in(2)
- 9.488 in(2)
- 9.685 in(2)
- 9.724 in(2)
- 9.882 in(2)
- 9.961 in(2)
- 10.039 in(2)
- 10.236 in(4)
- 10.472 in(2)
- 10.63 in(2)
- 10.749 in(2)
- 10.984 in(2)
- 11.182 in(2)
- 11.378 in(2)
- 11.654 in(2)
- 11.733 in(2)
- 11.89 in(2)
- 12.166 in(2)
- 12.283 in(2)
- 12.48 in(2)
- 12.638 in(2)
- 12.677 in(2)
- 13.031 in(4)
- 13.189 in(2)
- 13.387 in(2)
- 13.544 in(2)
- 13.781 in(2)
- 14.094 in(2)
- 14.134 in(2)
- 14.528 in(2)
- 14.606 in(2)
- 15.157 in(1)
- 15.669 in(2)
- 15.827 in(2)
- 16.378 in(2)
- 16.417 in(2)
- 16.89 in(2)
- 17.165 in(2)
- 17.441 in(2)
- 17.913 in(2)
- 17.953 in(2)
- 18.504 in(1)
- 19.017 in(2)
- 19.567 in(2)
Over All Length [L] Min値を入力toOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 106.0 mm(2)
- 109.0 mm(2)
- 118.0 mm(2)
- 121.0 mm(2)
- 124.0 mm(2)
- 127.0 mm(2)
- 130.0 mm(2)
- 131.0 mm(2)
- 133.0 mm(2)
- 136.0 mm(2)
- 140.0 mm(1)
- 143.0 mm(2)
- 146.0 mm(4)
- 149.0 mm(2)
- 151.0 mm(2)
- 152.0 mm(2)
- 155.0 mm(4)
- 158.0 mm(2)
- 160.0 mm(2)
- 161.0 mm(2)
- 164.0 mm(2)
- 165.0 mm(2)
- 169.0 mm(2)
- 172.0 mm(2)
- 177.0 mm(2)
- 182.0 mm(2)
- 184.0 mm(2)
- 186.0 mm(2)
- 191.0 mm(4)
- 195.0 mm(2)
- 197.0 mm(2)
- 200.0 mm(2)
- 204.0 mm(4)
- 209.0 mm(2)
- 210.0 mm(2)
- 216.0 mm(2)
- 217.0 mm(2)
- 226.0 mm(2)
- 227.0 mm(2)
- 228.0 mm(2)
- 234.0 mm(2)
- 237.0 mm(2)
- 240.0 mm(2)
- 241.0 mm(2)
- 246.0 mm(2)
- 247.0 mm(2)
- 251.0 mm(2)
- 253.0 mm(2)
- 255.0 mm(2)
- 260.0 mm(4)
- 266.0 mm(2)
- 270.0 mm(2)
- 273.0 mm(2)
- 279.0 mm(2)
- 284.0 mm(2)
- 289.0 mm(2)
- 296.0 mm(2)
- 298.0 mm(2)
- 302.0 mm(2)
- 309.0 mm(2)
- 312.0 mm(2)
- 317.0 mm(2)
- 321.0 mm(2)
- 322.0 mm(2)
- 331.0 mm(4)
- 335.0 mm(2)
- 340.0 mm(2)
- 344.0 mm(2)
- 350.0 mm(2)
- 358.0 mm(2)
- 359.0 mm(2)
- 369.0 mm(2)
- 371.0 mm(2)
- 385.0 mm(1)
- 398.0 mm(2)
- 402.0 mm(2)
- 416.0 mm(2)
- 417.0 mm(2)
- 429.0 mm(2)
- 436.0 mm(2)
- 443.0 mm(2)
- 455.0 mm(2)
- 456.0 mm(2)
- 470.0 mm(1)
- 483.0 mm(2)
- 497.0 mm(2)
Over All Length [L] Min値を入力toOver All Length [L] MaxOver All Length [L]
cornerConfiguration
=
Corner Chamfer
Corner Chamfer
- 0.0 mm(253)
Corner Chamfer Min値を入力toCorner Chamfer MaxCorner Chamfer
=
Corner Chamfer
Corner Chamfer
- 0.0 in(253)
Corner Chamfer Min値を入力toCorner Chamfer MaxCorner Chamfer
application
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- WM15PD (280)
- WP40PD (335)
Hand Of Tool
Hand Of Tool
- R (181)
Wiper Insert
Wiper Insert
- N (253)
Drill Type
Drill Type
- 86-01 (181)
frontEnd
=
Point Angle
Point Angle
- 140.0 (380)
- 150.0 (235)
Point Angle Min値を入力toPoint Angle MaxPoint Angle
insertGeometry
Shape
Shape
- TDMX DRILL (253)
Insert Seat Size
Insert Seat Size
- A (14)
- B (17)
- C (12)
- D (20)
- E (26)
- F (8)
- G (10)
- H (8)
- I (8)
- J (16)
- K (13)
- L (8)
- M (10)
- N (10)
- O (10)
- P (9)
- Q (10)
- R (13)
- S (12)
- T (19)
Cutting Tool Material
Cutting Tool Material
- H W (253)
=
Cutting Diameter Insert
Cutting Diameter Insert
- 0.63 in(3)
- 0.638 in(2)
- 0.641 in(3)
- 0.65 in(3)
- 0.656 in(3)
- 0.669 in(3)
- 0.672 in(3)
- 0.689 in(2)
- 0.69 in(3)
- 0.694 in(2)
- 0.702 in(2)
- 0.704 in(2)
- 0.709 in(3)
- 0.719 in(2)
- 0.728 in(3)
- 0.734 in(2)
- 0.74 in(2)
- 0.748 in(3)
- 0.75 in(3)
- 0.756 in(2)
- 0.759 in(2)
- 0.766 in(2)
- 0.768 in(3)
- 0.776 in(2)
- 0.781 in(3)
- 0.787 in(3)
- 0.791 in(2)
- 0.795 in(2)
- 0.797 in(2)
- 0.799 in(2)
- 0.803 in(2)
- 0.807 in(3)
- 0.811 in(2)
- 0.814 in(2)
- 0.816 in(2)
- 0.82 in(2)
- 0.824 in(2)
- 0.828 in(3)
- 0.844 in(2)
- 0.846 in(3)
- 0.866 in(3)
- 0.875 in(2)
- 0.884 in(2)
- 0.886 in(3)
- 0.906 in(3)
- 0.925 in(3)
- 0.937 in(2)
- 0.946 in(3)
- 0.965 in(3)
- 0.969 in(2)
- 0.984 in(3)
- 1.0 in(3)
- 1.004 in(3)
- 1.012 in(4)
- 1.014 in(1)
- 1.016 in(2)
- 1.024 in(3)
- 1.032 in(2)
- 1.039 in(3)
- 1.043 in(3)
- 1.047 in(2)
- 1.063 in(3)
- 1.083 in(3)
- 1.094 in(2)
- 1.102 in(3)
- 1.109 in(2)
- 1.122 in(3)
- 1.125 in(2)
- 1.143 in(3)
- 1.156 in(2)
- 1.161 in(3)
- 1.172 in(2)
- 1.181 in(3)
- 1.188 in(2)
- 1.201 in(3)
- 1.219 in(2)
- 1.22 in(3)
- 1.24 in(3)
- 1.25 in(3)
- 1.26 in(3)
- 1.28 in(2)
- 1.299 in(3)
- 1.313 in(2)
- 1.339 in(3)
- 1.344 in(2)
- 1.375 in(2)
- 1.379 in(3)
- 1.399 in(3)
- 1.417 in(3)
- 1.437 in(3)
- 1.457 in(3)
- 1.476 in(3)
- 1.496 in(3)
- 1.5 in(3)
- 1.508 in(1)
- 1.516 in(3)
- 1.536 in(3)
- 1.547 in(1)
- 1.555 in(2)
- 1.575 in(3)
Cutting Diameter Insert Min値を入力toCutting Diameter Insert MaxCutting Diameter Insert
=
Cutting Diameter Insert
Cutting Diameter Insert
- 16.0 mm(3)
- 16.2 mm(2)
- 16.276 mm(3)
- 16.5 mm(3)
- 16.675 mm(3)
- 17.0 mm(3)
- 17.075 mm(3)
- 17.475 mm(2)
- 17.5 mm(3)
- 17.6 mm(2)
- 17.8 mm(2)
- 17.85 mm(2)
- 18.0 mm(3)
- 18.25 mm(2)
- 18.5 mm(3)
- 18.651 mm(2)
- 18.8 mm(2)
- 19.0 mm(3)
- 19.05 mm(3)
- 19.201 mm(2)
- 19.276 mm(2)
- 19.451 mm(2)
- 19.5 mm(3)
- 19.701 mm(2)
- 19.85 mm(3)
- 20.0 mm(3)
- 20.1 mm(2)
- 20.201 mm(2)
- 20.25 mm(2)
- 20.3 mm(2)
- 20.401 mm(2)
- 20.5 mm(3)
- 20.6 mm(2)
- 20.651 mm(2)
- 20.701 mm(2)
- 20.8 mm(2)
- 20.901 mm(2)
- 21.0 mm(3)
- 21.425 mm(2)
- 21.5 mm(3)
- 22.0 mm(3)
- 22.225 mm(2)
- 22.451 mm(2)
- 22.5 mm(3)
- 23.0 mm(3)
- 23.5 mm(3)
- 23.8 mm(2)
- 24.0 mm(3)
- 24.5 mm(3)
- 24.6 mm(2)
- 25.0 mm(3)
- 25.401 mm(3)
- 25.5 mm(3)
- 25.675 mm(2)
- 25.701 mm(2)
- 25.75 mm(1)
- 25.8 mm(2)
- 26.0 mm(3)
- 26.201 mm(2)
- 26.401 mm(3)
- 26.5 mm(3)
- 26.6 mm(2)
- 27.0 mm(3)
- 27.5 mm(3)
- 27.776 mm(2)
- 28.0 mm(3)
- 28.175 mm(2)
- 28.5 mm(3)
- 28.576 mm(2)
- 29.0 mm(3)
- 29.375 mm(2)
- 29.5 mm(3)
- 29.776 mm(2)
- 30.0 mm(3)
- 30.175 mm(2)
- 30.5 mm(3)
- 30.951 mm(2)
- 31.0 mm(3)
- 31.5 mm(3)
- 31.75 mm(3)
- 32.0 mm(3)
- 32.5 mm(2)
- 33.0 mm(3)
- 33.35 mm(2)
- 34.0 mm(3)
- 34.125 mm(2)
- 34.926 mm(2)
- 35.0 mm(3)
- 35.5 mm(3)
- 36.0 mm(3)
- 36.5 mm(3)
- 37.0 mm(3)
- 37.5 mm(3)
- 38.0 mm(3)
- 38.1 mm(3)
- 38.301 mm(1)
- 38.5 mm(3)
- 39.0 mm(3)
- 39.301 mm(1)
- 39.5 mm(2)
- 40.0 mm(3)
Cutting Diameter Insert Min値を入力toCutting Diameter Insert MaxCutting Diameter Insert
backEnd
Connection Type
Connection Type
- CYLINDRICAL (181)
=
Back-End Diameter
Back-End Diameter
- 19.05 mm(10)
- 20.0 mm(10)
- 25.0 mm(30)
- 25.401 mm(29)
- 31.75 mm(38)
- 32.0 mm(40)
- 38.1 mm(12)
- 40.0 mm(12)
Back-End Diameter Min値を入力toBack-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.75 in(10)
- 0.787 in(10)
- 0.984 in(30)
- 1.0 in(29)
- 1.25 in(38)
- 1.26 in(40)
- 1.5 in(12)
- 1.575 in(12)
Back-End Diameter Min値を入力toBack-End Diameter MaxBack-End Diameter
No filters matching ""
