ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

WIDIAにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

    eBore™

    フィルタを選択
    フィルタ
    フィルタ
      フィルタ表示
      メートル
      インチ
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (44)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
      • M Stainless Steel (44)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
      • K Cast Iron (39)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(39)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(39)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(39)
      • N Non-Ferrous Materials (39)
        • N1
          Wrought Aluminum (39)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(39)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(39)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (39)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (39)
        • N6
          Carbon, Graphite Composites, CFRP (39)
        • N7
          MMC's (39)
      • S High-Temp Alloys (44)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
      • H Hardened Materials (39)
        • H1
          Hardened Materials 44-48 HRC(39)
        • H2
          Hardened Materials 48-55 HRC(39)
        • H3
          Hardened Materials 56-60 HRC(39)
        • H4
          Hardened Materials >60 HRC(39)
      • C CFRP Materials (39)
        • C1
          CFRP, CFRP / CFRP (39)
        • C2
          CFRP / Aluminium CFRP / Non-Ferrous (39)
      Applications
      Applications
      • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (71)
      • Blind Hole FinishingBlind Hole Finishing (71)
      • Through & Cross Hole FinishingThrough & Cross Hole Finishing (71)
      • Through Hole FinishingThrough Hole Finishing (71)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (39)
      • Lightly Interrupted Cut (44)
      • Smooth Cut (44)
      • Varying Depth of Cut (44)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (12)
      • 91.0 (8)
      • 92.0 (23)
      Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • E-BORE Boring Bar (21)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (17)
      • 2.0 (17)
      • 3.0 (5)
      • 4.0 (17)
      Cutting Edges Per Insert MintoCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 0.36 in(1)
      • 0.395 in(1)
      • 0.496 in(3)
      • 0.574 in(1)
      • 0.576 in(1)
      • 0.592 in(1)
      • 0.65 in(2)
      • 0.669 in(3)
      • 0.811 in(1)
      • 0.816 in(2)
      • 1.0 in(1)
      • 1.205 in(1)
      • 1.209 in(3)
      • 1.772 in(1)
      • 1.891 in(1)
      • 2.086 in(1)
      • 2.087 in(1)
      • 2.165 in(1)
      • 2.265 in(1)
      • 2.282 in(2)
      • 2.479 in(1)
      • 2.676 in(1)
      • 2.677 in(1)
      • 2.873 in(1)
      • 3.071 in(1)
      • 3.269 in(1)
      • 3.661 in(2)
      • 3.858 in(2)
      • 4.449 in(2)
      • 4.843 in(1)
      • 5.63 in(1)
      Over All Length [L] MintoOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 9.15 mm(1)
      • 10.025 mm(1)
      • 12.601 mm(3)
      • 14.55 mm(1)
      • 14.601 mm(1)
      • 15.025 mm(1)
      • 16.5 mm(2)
      • 17.0 mm(3)
      • 20.6 mm(1)
      • 20.701 mm(2)
      • 25.401 mm(1)
      • 30.6 mm(1)
      • 30.701 mm(3)
      • 45.0 mm(1)
      • 48.0 mm(1)
      • 52.975 mm(1)
      • 53.0 mm(1)
      • 55.0 mm(1)
      • 57.5 mm(1)
      • 57.975 mm(2)
      • 62.975 mm(1)
      • 67.976 mm(1)
      • 68.0 mm(1)
      • 72.976 mm(1)
      • 78.0 mm(1)
      • 83.0 mm(1)
      • 93.0 mm(2)
      • 98.0 mm(2)
      • 113.0 mm(2)
      • 123.0 mm(1)
      • 143.0 mm(1)
      Over All Length [L] MintoOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.0 in(3)
      • 0.001 in(32)
      • 0.002 in(32)
      • 0.004 in(44)
      • 0.008 in(39)
      • 0.016 in(39)
      • 0.031 in(39)
      • 0.047 in(10)
      • 0.063 in(3)
      Corner Radius MintoCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(3)
      • 0.025 mm(32)
      • 0.05 mm(32)
      • 0.1 mm(44)
      • 0.2 mm(39)
      • 0.4 mm(39)
      • 0.8 mm(39)
      • 1.201 mm(10)
      • 1.6 mm(3)
      Corner Radius MintoCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(23)
      Corner Chamfer MintoCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(23)
      Corner Chamfer MintoCorner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • HCK10 (39)
      • HK1500 (32)
      • HK35 (36)
      • HT2 (39)
      • HTX (39)
      • HWK15 (39)
      • K10M (36)
      • K10P (36)
      • K10U (32)
      • K15U (32)
      • K20K (36)
      • K25M (29)
      • K313 (39)
      • K68 (39)
      • KB1345 (10)
      • KB1610 (32)
      • KB1630 (39)
      • KB5610 (32)
      • KB5625 (32)
      • KB5630 (32)
      • KB9610 (32)
      • KBH10 (32)
      • KBH20 (39)
      • KC5010 (39)
      • KC5025 (39)
      • KC5410 (39)
      • KC720 (39)
      • KC730 (39)
      • KC732 (39)
      • KC8050 (39)
      • KC810 (39)
      • KC850 (39)
      • KC9010 (32)
      • KC9025 (39)
      • KC910 (39)
      • KC9105 (39)
      • KC9110 (39)
      • KC9120 (32)
      • KC9125 (39)
      • KC9225 (39)
      • KC9240 (39)
      • KC9240NEW (39)
      • KC9315 (39)
      • KC9320 (39)
      • KC9325 (39)
      • KC935 (39)
      • KC950 (32)
      • KC990 (32)
      • KCD25 (39)
      • KCK05 (39)
      • KCK05B (32)
      • KCK15 (39)
      • KCK15B (39)
      • KCK20 (39)
      • KCK20B (39)
      • KCM15 (39)
      • KCM15B (39)
      • KCM25 (39)
      • KCM25B (39)
      • KCM25S (32)
      • KCM35 (39)
      • KCM35B (3)
      • KCP05 (39)
      • KCP05B (3)
      • KCP10 (39)
      • KCP10B (39)
      • KCP20S (32)
      • KCP25 (39)
      • KCP25B (39)
      • KCP25C (39)
      • KCP30 (39)
      • KCP30B (10)
      • KCS10 (39)
      • KCS10B (39)
      • KCS25S (32)
      • KCU10 (43)
      • KCU10B (39)
      • KCU25 (39)
      • KCU25B (39)
      • KD050 (32)
      • KD081 (32)
      • KD1400 (32)
      • KD1425 (32)
      • KN10S (32)
      • KT175 (32)
      • KT315 (39)
      • KT325 (39)
      • KTP10 (32)
      • KTP25S (32)
      • KU10 (32)
      • KU10T (39)
      • KU30T (39)
      • NL300 (7)
      • NL920 (7)
      • PB100 (29)
      • PB170 (36)
      • PB250 (36)
      • PB300 (29)
      • PD100 (39)
      • PD50 (36)
      • SP0PW3 (7)
      • SP4019 (7)
      • SPN3W1 (3)
      • THM (39)
      • THM-X (39)
      • TN1000 (29)
      • TN10P (39)
      • TN10U (39)
      • TN15M (39)
      • TN15U (32)
      • TN2000 (39)
      • TN20K (39)
      • TN20P (39)
      • TN30M (39)
      • TN4000 (32)
      • TN5015 (39)
      • TN5020 (39)
      • TN5105 (39)
      • TN5120 (39)
      • TN6010 (10)
      • TN6025 (3)
      • TN7005 (3)
      • TN7010 (39)
      • TN7015 (39)
      • TN7025 (39)
      • TN7035 (39)
      • TN7105 (39)
      • TN7110 (39)
      • TN7115 (39)
      • TN7125 (39)
      • TN7135 (39)
      • TN8025 (39)
      • TTI15 (32)
      • TTM (3)
      • TTR (39)
      • TTS (32)
      • TTX (3)
      • W00342 (7)
      • WBH10C (32)
      • WBH10P (32)
      • WBH10U (32)
      • WBH20P (10)
      • WBH25P (32)
      • WBH30P (3)
      • WBK45U (10)
      • WDN00U (32)
      • WDN25U (32)
      • WK05CT (39)
      • WK15CT (39)
      • WK20CT (39)
      • WM15CT (39)
      • WM25CT (39)
      • WP15CT (39)
      • WP20TT (29)
      • WP25CT (39)
      • WP35CT (10)
      • WS10PT (39)
      • WS25PT (32)
      • WU05PT (39)
      • WU10HT (39)
      • WU10PR (5)
      • WU10PT (39)
      • WU20HT (29)
      • WU25PT (39)
      Hand Of Tool
      Hand Of Tool
      • R (21)
      Wiper Insert
      Wiper Insert
      • N (22)
      F Dimension
      F Dimension
      • 0.151 mm(1)
      • 2.825 mm(2)
      • 3.825 mm(1)
      • 4.75 mm(1)
      • 4.775 mm(3)
      • 5.75 mm(2)
      • 5.775 mm(1)
      • 6.75 mm(2)
      • 6.775 mm(2)
      • 7.325 mm(1)
      • 7.75 mm(1)
      • 7.775 mm(2)
      • 9.775 mm(1)
      • 12.275 mm(1)
      F Dimension MintoF Dimension Max
      F Dimension
      F Dimension
      • 0.006 in(1)
      • 0.111 in(2)
      • 0.151 in(1)
      • 0.187 in(1)
      • 0.188 in(3)
      • 0.226 in(2)
      • 0.227 in(1)
      • 0.266 in(2)
      • 0.267 in(2)
      • 0.289 in(1)
      • 0.305 in(1)
      • 0.306 in(2)
      • 0.385 in(1)
      • 0.483 in(1)
      F Dimension MintoF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 2.0 mm(1)
      • 6.0 mm(2)
      • 8.0 mm(2)
      • 10.0 mm(4)
      • 12.0 mm(3)
      • 14.0 mm(4)
      • 15.0 mm(1)
      • 16.0 mm(3)
      • 19.5 mm(1)
      • 20.0 mm(1)
      • 22.5 mm(1)
      • 24.5 mm(1)
      • 25.0 mm(1)
      • 25.5 mm(1)
      • 29.0 mm(2)
      • 36.0 mm(2)
      • 40.0 mm(1)
      • 43.0 mm(1)
      • 52.0 mm(1)
      • 53.0 mm(1)
      • 65.0 mm(2)
      • 68.0 mm(1)
      • 76.0 mm(1)
      • 82.0 mm(1)
      • 100.0 mm(1)
      • 125.0 mm(1)
      • 200.0 mm(2)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.079 in(1)
      • 0.237 in(2)
      • 0.315 in(2)
      • 0.394 in(4)
      • 0.473 in(3)
      • 0.551 in(4)
      • 0.591 in(1)
      • 0.63 in(3)
      • 0.768 in(1)
      • 0.787 in(1)
      • 0.886 in(1)
      • 0.965 in(1)
      • 0.984 in(1)
      • 1.004 in(1)
      • 1.143 in(2)
      • 1.417 in(2)
      • 1.575 in(1)
      • 1.693 in(1)
      • 2.047 in(1)
      • 2.087 in(1)
      • 2.559 in(2)
      • 2.677 in(1)
      • 2.992 in(1)
      • 3.228 in(1)
      • 3.938 in(1)
      • 4.921 in(1)
      • 7.875 in(2)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 0.315 in(2)
      • 0.394 in(2)
      • 0.473 in(4)
      • 0.551 in(3)
      • 0.63 in(4)
      • 0.787 in(4)
      • 0.906 in(1)
      • 0.984 in(1)
      • 1.024 in(1)
      • 1.181 in(2)
      • 1.457 in(2)
      • 1.614 in(1)
      • 1.732 in(1)
      • 2.087 in(1)
      • 2.126 in(1)
      • 2.283 in(1)
      • 2.598 in(2)
      • 3.031 in(1)
      • 3.269 in(1)
      • 4.016 in(1)
      • 4.055 in(1)
      • 5.118 in(1)
      • 5.984 in(1)
      • 8.071 in(2)
      • 40.158 in(2)
      Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 8.0 mm(2)
      • 10.0 mm(2)
      • 12.0 mm(4)
      • 14.0 mm(3)
      • 16.0 mm(4)
      • 20.0 mm(4)
      • 23.0 mm(1)
      • 25.0 mm(1)
      • 26.0 mm(1)
      • 30.0 mm(2)
      • 37.0 mm(2)
      • 41.0 mm(1)
      • 44.0 mm(1)
      • 53.0 mm(1)
      • 54.0 mm(1)
      • 58.0 mm(1)
      • 66.0 mm(2)
      • 77.0 mm(1)
      • 83.0 mm(1)
      • 102.0 mm(1)
      • 103.0 mm(1)
      • 130.0 mm(1)
      • 152.0 mm(1)
      • 205.0 mm(2)
      • 1020.0 mm(2)
      Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • E (21)
      Rake Angle Style
      Rake Angle Style
      • NEGATIVE-ZERO (21)
      Maximum Bore Depth
      Maximum Bore Depth
      • 0.787 in(1)
      • 0.906 in(1)
      • 1.102 in(1)
      • 1.104 in(1)
      • 1.181 in(1)
      • 1.298 in(1)
      • 1.338 in(1)
      • 1.574 in(1)
      • 1.693 in(1)
      • 1.695 in(1)
      • 1.907 in(1)
      • 2.165 in(1)
      • 2.277 in(1)
      • 2.757 in(2)
      • 2.953 in(2)
      • 3.543 in(2)
      • 3.938 in(1)
      • 4.724 in(1)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 20.0 mm(1)
      • 23.0 mm(1)
      • 28.0 mm(1)
      • 28.05 mm(1)
      • 30.0 mm(1)
      • 32.975 mm(1)
      • 33.975 mm(1)
      • 39.975 mm(1)
      • 43.0 mm(1)
      • 43.051 mm(1)
      • 48.426 mm(1)
      • 55.0 mm(1)
      • 57.825 mm(1)
      • 70.0 mm(2)
      • 75.0 mm(2)
      • 90.0 mm(2)
      • 100.0 mm(1)
      • 120.0 mm(1)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • S (21)
      frontEnd
      Insert Shape
      Insert Shape
      • C-DIAMOND/RHOMBIC 80 (39)
      • W-TRIGON 80 (4)
      • X-TRIGON 82 (1)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.157 in(2)
      • 0.197 in(2)
      • 0.237 in(4)
      • 0.276 in(3)
      • 0.315 in(4)
      • 0.394 in(4)
      • 0.492 in(1)
      • 0.591 in(1)
      Maximum Cutting Depth MintoMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 4.0 mm(2)
      • 5.0 mm(2)
      • 6.0 mm(4)
      • 7.0 mm(3)
      • 8.0 mm(4)
      • 10.0 mm(4)
      • 12.5 mm(1)
      • 15.0 mm(1)
      Maximum Cutting Depth MintoMaximum Cutting Depth Max
      Gage Length
      Gage Length
      • 0.576 in(1)
      • 0.63 in(3)
      • 1.161 in(1)
      • 1.772 in(1)
      • 1.891 in(1)
      • 2.677 in(1)
      • 2.757 in(4)
      • 2.835 in(2)
      • 2.992 in(2)
      • 3.228 in(1)
      • 3.307 in(1)
      • 3.346 in(4)
      • 3.386 in(3)
      • 3.543 in(1)
      • 3.701 in(1)
      • 3.938 in(1)
      • 4.016 in(2)
      • 4.094 in(2)
      • 4.331 in(4)
      • 4.488 in(1)
      • 4.724 in(1)
      • 5.118 in(2)
      • 5.236 in(1)
      • 5.433 in(2)
      • 5.827 in(1)
      • 6.299 in(1)
      Gage Length
      Gage Length
      • 110 mm(4)
      • 70 mm(4)
      • 85 mm(4)
      • 16 mm(3)
      • 86 mm(3)
      • 102 mm(2)
      • 104 mm(2)
      • 130 mm(2)
      • 138 mm(2)
      • 72 mm(2)
      • 76 mm(2)
      • 100 mm(1)
      • 114 mm(1)
      • 120 mm(1)
      • 133 mm(1)
      • 148 mm(1)
      • 160 mm(1)
      • 45 mm(1)
      • 48 mm(1)
      • 68 mm(1)
      • 82 mm(1)
      • 84 mm(1)
      • 90 mm(1)
      • 94 mm(1)
      • 14.601 mm(1)
      • 29.5 mm(1)
      insertGeometry
      Shape
      Shape
      • X-TRIGON 82 (1)
      Insert IC Size
      Insert IC Size
      • 3.975 mm(1)
      Insert IC Size MintoInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.156 in(1)
      Insert IC Size MintoInsert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 3.45 mm(1)
      Cutting Edge Length MintoCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.136 in(1)
      Cutting Edge Length MintoCutting Edge Length Max
      Cutting Tool Material
      Cutting Tool Material
      • B H (39)
      • B L (39)
      • C N (32)
      • D P (39)
      • H T (39)
      • H W (39)
      Tolerance Class
      Tolerance Class
      • G (1)
      backEnd
      System Size
      System Size
      • HSK63A (10)
      • KM32TS (4)
      • KM40TS (2)
      • KM50TS (5)
      • KM63TS (2)
      • KM80TS (5)
      Back-End Diameter
      Back-End Diameter
      • 16.0 mm(28)
      • 18.0 mm(1)
      • 20.0 mm(1)
      • 25.0 mm(1)
      • 32.0 mm(4)
      • 40.0 mm(2)
      • 50.0 mm(5)
      • 60.0 mm(6)
      • 63.0 mm(12)
      • 80.0 mm(5)
      Back-End Diameter MintoBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.63 in(28)
      • 0.709 in(1)
      • 0.787 in(1)
      • 0.984 in(1)
      • 1.26 in(4)
      • 1.575 in(2)
      • 1.969 in(5)
      • 2.362 in(6)
      • 2.48 in(12)
      • 3.15 in(5)
      Back-End Diameter MintoBack-End Diameter Max
      No filters matching ""
      eBore™ユニバーサル
      (39)

      eBore™ユニバーサル

      eBore™ボーリングツール
      (21)

      eBore™ボーリングツール

      eBore™ブリッジ
      (11)

      eBore™ブリッジ

      eBore™ツインカッター
      (22)

      eBore™ツインカッター

      eBore™デジタルディスプレイ
      (2)

      eBore™デジタルディスプレイ

      eBore™インサート
      (1)

      eBore™インサート

      マイソリューションページにを追加しようとしています. 続行しますか?
      Select the destination where you want to move to.
      新規 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      有効な名前を入力してください
      product-image
      Please adjust the following properties from

      ISO製品型番

      ANSI製品型番

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      ダッシュボード情報を表示するには、ログインする必要があります
      Session expired due to inactivity, please login again
      カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
      アイテムがカートに正常に追加されました
      カートを表示

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO製品型番材種  

      You are about to leave the Solution building process.

      Are you sure you want to leave?