ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

WIDIAにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

    レイダウンねじ切り

    フィルタを選択
    フィルタ
    フィルタ
      フィルタ表示
      メートル
      インチ
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (180)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(180)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(180)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(180)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(180)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(180)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(180)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(180)
      • M Stainless Steel (180)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(180)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(180)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(180)
      • K Cast Iron (180)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(180)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(180)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(180)
      • N Non-Ferrous Materials (178)
        • N1
          Wrought Aluminum (178)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(178)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(178)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (178)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (178)
        • N6
          Carbon, Graphite Composites, CFRP (178)
        • N7
          MMC's (178)
      • S High-Temp Alloys (180)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(180)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(180)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(180)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(180)
      Select All Star
      • US (7)
      Applications
      Applications
      • ID Thread TurningID Thread Turning (94)
      • OD Thread TurningOD Thread Turning (88)
      • ProfilingProfiling (10)
      • TRN BoringTRN Boring (5)
      • ThreadingThreading (29)
      Type of Thread
      Type of Thread
      • 55 (71)
      • 60 (82)
      • ACME (16)
      • API (6)
      • API BUTTRESS (5)
      • API RD (11)
      • BSPT (15)
      • BSW (68)
      • M (106)
      • NPT (42)
      • NPTF (15)
      • RD DIN 405 (56)
      • STUB ACME (16)
      • TR DIN 103 (63)
      • UN (69)
      • UNJ (15)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (69)
      Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Boring Bar Shank (27)
      • KM (22)
      • Toolholder (19)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 3.0 (184)
      Cutting Edges Per Insert MintoCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.575 in(7)
      • 1.772 in(3)
      • 2.362 in(2)
      • 2.757 in(2)
      • 3.15 in(1)
      • 3.25 in(1)
      • 3.543 in(2)
      • 3.938 in(6)
      • 4.331 in(4)
      • 4.921 in(1)
      • 5.0 in(1)
      • 5.039 in(1)
      • 5.354 in(1)
      • 5.906 in(1)
      • 6.0 in(8)
      • 6.024 in(1)
      • 6.102 in(1)
      • 6.811 in(1)
      • 6.891 in(1)
      • 6.929 in(1)
      • 7.0 in(4)
      • 7.087 in(7)
      • 7.875 in(3)
      • 9.843 in(6)
      • 10.0 in(3)
      Over All Length [L] MintoOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 40.0 mm(7)
      • 45.0 mm(3)
      • 60.0 mm(2)
      • 70.0 mm(2)
      • 80.0 mm(1)
      • 82.551 mm(1)
      • 90.0 mm(2)
      • 100.0 mm(6)
      • 110.0 mm(4)
      • 125.0 mm(1)
      • 127.0 mm(1)
      • 128.0 mm(1)
      • 136.0 mm(1)
      • 150.0 mm(1)
      • 152.4 mm(8)
      • 153.0 mm(1)
      • 155.0 mm(1)
      • 173.0 mm(1)
      • 175.0 mm(1)
      • 176.0 mm(1)
      • 177.8 mm(4)
      • 180.0 mm(7)
      • 200.0 mm(3)
      • 250.0 mm(6)
      • 254.0 mm(3)
      Over All Length [L] MintoOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.001 in(7)
      • 0.002 in(62)
      • 0.003 in(39)
      • 0.004 in(24)
      • 0.005 in(1)
      • 0.006 in(20)
      • 0.007 in(1)
      • 0.008 in(40)
      • 0.01 in(14)
      • 0.011 in(16)
      • 0.012 in(16)
      • 0.014 in(1)
      • 0.015 in(1)
      • 0.017 in(15)
      • 0.02 in(1)
      • 0.021 in(7)
      • 0.027 in(1)
      • 0.028 in(17)
      • 0.03 in(13)
      • 0.037 in(20)
      • 0.038 in(1)
      • 0.039 in(5)
      • 0.055 in(7)
      • 0.06 in(5)
      Corner Radius MintoCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.025 mm(7)
      • 0.05 mm(62)
      • 0.076 mm(39)
      • 0.1 mm(24)
      • 0.125 mm(1)
      • 0.151 mm(20)
      • 0.176 mm(1)
      • 0.2 mm(40)
      • 0.225 mm(4)
      • 0.25 mm(11)
      • 0.275 mm(16)
      • 0.301 mm(16)
      • 0.325 mm(1)
      • 0.375 mm(1)
      • 0.426 mm(15)
      • 0.5 mm(1)
      • 0.525 mm(7)
      • 0.65 mm(1)
      • 0.701 mm(17)
      • 0.75 mm(13)
      • 0.925 mm(20)
      • 0.976 mm(1)
      • 1.0 mm(5)
      • 1.401 mm(7)
      • 1.526 mm(5)
      Corner Radius MintoCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(117)
      Corner Chamfer MintoCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(117)
      Corner Chamfer MintoCorner Chamfer Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • HCK20 (14)
      • HCM15 (9)
      • K00331 (6)
      • K15 (41)
      • K68 (8)
      • KC5010 (10)
      • KC5025 (21)
      • KC710 (9)
      • KC720 (18)
      • KC722 (8)
      • KC730 (19)
      • KC9105 (1)
      • KU25T (8)
      • P25 (29)
      • PN120 (12)
      • SP4066 (4)
      • TN6025 (180)
      • TTS (11)
      Hand Of Tool
      Hand Of Tool
      • L (20)
      • R (48)
      Wiper Insert
      Wiper Insert
      • N (184)
      F Dimension
      F Dimension
      • 7.0 mm(2)
      • 7.101 mm(3)
      • 7.301 mm(1)
      • 7.4 mm(1)
      • 8.625 mm(1)
      • 8.9 mm(2)
      • 9.0 mm(2)
      • 11.0 mm(2)
      • 11.5 mm(2)
      • 11.675 mm(2)
      • 12.701 mm(1)
      • 12.951 mm(2)
      • 13.0 mm(2)
      • 13.4 mm(2)
      • 15.601 mm(1)
      • 16.0 mm(2)
      • 16.1 mm(2)
      • 16.3 mm(2)
      • 16.5 mm(1)
      • 17.0 mm(2)
      • 17.2 mm(1)
      • 17.401 mm(1)
      • 19.05 mm(1)
      • 19.6 mm(1)
      • 20.0 mm(2)
      • 21.5 mm(1)
      • 22.0 mm(4)
      • 22.401 mm(1)
      • 25.0 mm(3)
      • 25.401 mm(4)
      • 27.0 mm(9)
      • 31.75 mm(2)
      • 32.0 mm(3)
      F Dimension MintoF Dimension Max
      F Dimension
      F Dimension
      • 0.276 in(2)
      • 0.28 in(3)
      • 0.288 in(1)
      • 0.291 in(1)
      • 0.34 in(1)
      • 0.351 in(2)
      • 0.354 in(2)
      • 0.433 in(2)
      • 0.453 in(2)
      • 0.46 in(2)
      • 0.5 in(1)
      • 0.51 in(2)
      • 0.512 in(2)
      • 0.528 in(2)
      • 0.614 in(1)
      • 0.63 in(2)
      • 0.634 in(2)
      • 0.642 in(2)
      • 0.65 in(1)
      • 0.669 in(2)
      • 0.677 in(1)
      • 0.685 in(1)
      • 0.75 in(1)
      • 0.772 in(1)
      • 0.787 in(2)
      • 0.846 in(1)
      • 0.866 in(4)
      • 0.882 in(1)
      • 0.984 in(3)
      • 1.0 in(4)
      • 1.063 in(9)
      • 1.25 in(2)
      • 1.26 in(3)
      F Dimension MintoF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 12.701 mm(3)
      • 13.0 mm(4)
      • 16.0 mm(4)
      • 16.5 mm(1)
      • 20.0 mm(3)
      • 20.326 mm(2)
      • 22.85 mm(2)
      • 24.0 mm(2)
      • 25.0 mm(2)
      • 27.0 mm(1)
      • 29.0 mm(4)
      • 30.475 mm(1)
      • 32.0 mm(4)
      • 36.0 mm(1)
      • 39.0 mm(1)
      • 40.0 mm(5)
      • 54.0 mm(4)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.5 in(3)
      • 0.512 in(4)
      • 0.63 in(4)
      • 0.65 in(1)
      • 0.787 in(3)
      • 0.8 in(2)
      • 0.9 in(2)
      • 0.946 in(2)
      • 0.984 in(2)
      • 1.063 in(1)
      • 1.143 in(4)
      • 1.2 in(1)
      • 1.26 in(4)
      • 1.417 in(1)
      • 1.536 in(1)
      • 1.575 in(5)
      • 2.126 in(4)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Countersunk Angle
      Countersunk Angle
      • 15.0 (7)
      • 27.5 (12)
      • 30.0 (50)
      Countersunk Angle MintoCountersunk Angle Max
      Cutting Direction
      Cutting Direction
      • E (29)
      • S (39)
      Rake Angle Style
      Rake Angle Style
      • DOUBLE NEGATIVE (68)
      Maximum Bore Depth
      Maximum Bore Depth
      • 0.984 in(1)
      • 1.0 in(1)
      • 1.25 in(1)
      • 1.26 in(1)
      • 1.385 in(2)
      • 1.5 in(1)
      • 1.575 in(4)
      • 1.655 in(1)
      • 1.661 in(1)
      • 1.772 in(1)
      • 1.891 in(1)
      • 2.209 in(1)
      • 2.25 in(2)
      • 2.362 in(4)
      • 2.5 in(1)
      • 2.757 in(2)
      • 2.955 in(2)
      • 3.0 in(1)
      • 3.15 in(4)
      • 3.75 in(1)
      • 3.781 in(4)
      • 3.938 in(3)
      • 4.5 in(1)
      • 5.039 in(3)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 25.0 mm(1)
      • 25.401 mm(1)
      • 31.75 mm(1)
      • 32.0 mm(1)
      • 35.15 mm(2)
      • 38.1 mm(1)
      • 40.0 mm(4)
      • 42.0 mm(1)
      • 42.2 mm(1)
      • 45.0 mm(1)
      • 48.0 mm(1)
      • 56.1 mm(1)
      • 57.151 mm(2)
      • 60.0 mm(4)
      • 63.5 mm(1)
      • 70.025 mm(2)
      • 75.05 mm(2)
      • 76.2 mm(1)
      • 80.0 mm(4)
      • 95.25 mm(1)
      • 96.025 mm(4)
      • 100.0 mm(3)
      • 114.301 mm(1)
      • 128.0 mm(3)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • C (4)
      • S (39)
      frontEnd
      Clamp Style
      Clamp Style
      • C (14)
      • M (4)
      • S (51)
      Insert Shape
      Insert Shape
      • LT-TRIANGLE LAY DOWN THREAD 60 (181)
      • ON EDGE MISC (5)
      Thread TPI
      Thread TPI
      • 4.0 (1)
      • 4.5 (1)
      • 7.0 (5)
      • 8.0 (6)
      • 10.0 (2)
      • 11.0 (3)
      • 11.5 (2)
      • 12.0 (3)
      • 13.0 (1)
      • 14.0 (12)
      • 16.0 (3)
      • 18.0 (4)
      • 19.0 (1)
      • 20.0 (2)
      • 24.0 (1)
      • 28.0 (2)
      • 32.0 (2)
      • 48.0 (16)
      Thread TPI MintoThread TPI Max
      Thread Pitch
      Thread Pitch
      • 0.351 mm(1)
      • 0.5 mm(2)
      • 0.701 mm(1)
      • 0.75 mm(3)
      • 0.8 mm(1)
      • 1.0 mm(3)
      • 1.25 mm(2)
      • 1.5 mm(15)
      • 1.75 mm(2)
      • 2.0 mm(4)
      • 2.5 mm(2)
      • 3.0 mm(18)
      • 3.5 mm(2)
      • 4.0 mm(4)
      • 4.5 mm(2)
      • 5.0 mm(9)
      • 5.5 mm(2)
      • 6.0 mm(5)
      Thread Pitch MintoThread Pitch Max
      Thread Pitch
      Thread Pitch
      • 0.014 in(1)
      • 0.02 in(2)
      • 0.028 in(1)
      • 0.03 in(3)
      • 0.031 in(1)
      • 0.039 in(3)
      • 0.049 in(2)
      • 0.06 in(15)
      • 0.069 in(2)
      • 0.079 in(4)
      • 0.098 in(2)
      • 0.119 in(18)
      • 0.138 in(2)
      • 0.157 in(4)
      • 0.177 in(2)
      • 0.197 in(9)
      • 0.217 in(2)
      • 0.237 in(5)
      Thread Pitch MintoThread Pitch Max
      insertGeometry
      Shape
      Shape
      • LT-TRIANGLE LAY DOWN THREAD 60 (117)
      Insert IC Size
      Insert IC Size
      • 6.351 mm(8)
      • 9.525 mm(83)
      • 12.701 mm(18)
      • 15.875 mm(6)
      Insert IC Size MintoInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.25 in(8)
      • 0.375 in(83)
      • 0.5 in(18)
      • 0.625 in(6)
      Insert IC Size MintoInsert IC Size Max
      Insert Seat Size
      Insert Seat Size
      • 2 (8)
      • 3 (84)
      • 4 (18)
      • 5 (7)
      Cutting Tool Material
      Cutting Tool Material
      • H W (184)
      backEnd
      Connection Type
      Connection Type
      • BORING BAR (27)
      • SQUARE SHANK (19)
      • TAPER SHANK (22)
      System Size
      System Size
      • KM40TS (22)
      Back-End Diameter
      Back-End Diameter
      • 9.525 mm(2)
      • 12.0 mm(1)
      • 15.0 mm(1)
      • 15.875 mm(1)
      • 19.05 mm(5)
      • 20.0 mm(7)
      • 25.0 mm(3)
      • 31.75 mm(1)
      • 32.0 mm(6)
      • 40.0 mm(23)
      Back-End Diameter MintoBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.375 in(2)
      • 0.473 in(1)
      • 0.591 in(1)
      • 0.625 in(1)
      • 0.75 in(5)
      • 0.787 in(7)
      • 0.984 in(3)
      • 1.25 in(1)
      • 1.26 in(6)
      • 1.575 in(23)
      Back-End Diameter MintoBack-End Diameter Max
      Shank Height
      Shank Height
      • 0.315 in(1)
      • 0.5 in(1)
      • 0.63 in(2)
      • 0.709 in(5)
      • 0.741 in(2)
      • 0.75 in(2)
      • 0.787 in(2)
      • 0.89 in(2)
      • 0.939 in(1)
      • 0.984 in(3)
      • 1.0 in(5)
      • 1.143 in(5)
      • 1.214 in(1)
      • 1.26 in(3)
      Shank Height MintoShank Height Max
      Shank Height
      Shank Height
      • 8.0 mm(1)
      • 12.701 mm(1)
      • 16.0 mm(2)
      • 18.0 mm(5)
      • 18.825 mm(2)
      • 19.05 mm(2)
      • 20.0 mm(2)
      • 22.6 mm(2)
      • 23.826 mm(1)
      • 25.0 mm(3)
      • 25.401 mm(5)
      • 29.0 mm(5)
      • 30.826 mm(1)
      • 32.0 mm(3)
      Shank Height MintoShank Height Max
      Shank Width
      Shank Width
      • 0.315 in(1)
      • 0.5 in(1)
      • 0.63 in(2)
      • 0.728 in(5)
      • 0.75 in(2)
      • 0.787 in(2)
      • 0.864 in(1)
      • 0.906 in(2)
      • 0.984 in(3)
      • 1.0 in(5)
      • 1.141 in(1)
      • 1.181 in(5)
      • 1.26 in(3)
      Shank Width MintoShank Width Max
      Shank Width
      Shank Width
      • 8.0 mm(1)
      • 12.701 mm(1)
      • 16.0 mm(2)
      • 18.5 mm(5)
      • 19.05 mm(2)
      • 20.0 mm(2)
      • 21.951 mm(1)
      • 23.0 mm(2)
      • 25.0 mm(3)
      • 25.401 mm(5)
      • 28.951 mm(1)
      • 30.0 mm(5)
      • 32.0 mm(3)
      Shank Width MintoShank Width Max
      No filters matching ""
      ツールホルダー
      (42)

      ツールホルダー

      ボーリングバー
      (27)

      ボーリングバー

      ねじ切りインサート
      (117)

      ねじ切りインサート

      マイソリューションページにを追加しようとしています. 続行しますか?
      Select the destination where you want to move to.
      新規 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      有効な名前を入力してください
      product-image
      Please adjust the following properties from

      ISO製品型番

      ANSI製品型番

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      Product data

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      ダッシュボード情報を表示するには、ログインする必要があります
      Session expired due to inactivity, please login again
      カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
      アイテムがカートに正常に追加されました
      カートを表示

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number ISO製品型番 材種  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk