M16 Series - Tool Bodies
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (4)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
- M Stainless Steel (4)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
- K Cast Iron (4)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- N Non-Ferrous Materials (2)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- S High-Temp Alloys (4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
Applications
Applications
Slot Milling (4)
Slot Side (4)
Slot T (4)
Cutting Diameter
Cutting Diameter
- 0.98 in(1)
- 1.256 in(1)
- 1.57 in(1)
- 1.964 in(1)
to
Cutting Diameter
Cutting Diameter
- 24.901 mm(1)
- 31.875 mm(1)
- 39.875 mm(1)
- 49.875 mm(1)
to
Cutting Length
Cutting Length
- 10.951 mm(1)
- 13.851 mm(1)
- 17.85 mm(1)
- 21.85 mm(1)
to
Cutting Length
Cutting Length
- 0.431 in(1)
- 0.545 in(1)
- 0.704 in(1)
- 0.86 in(1)
to
Reach
Reach
- 1.26 in(1)
- 1.655 in(1)
- 1.929 in(1)
- 2.362 in(1)
to
Reach
Reach
- 32.0 mm(1)
- 42.0 mm(1)
- 49.0 mm(1)
- 60.0 mm(1)
to
Over All Length [L]
Over All Length [L]
- 3.15 in(1)
- 3.543 in(1)
- 4.134 in(1)
- 4.724 in(1)
to
Over All Length [L]
Over All Length [L]
- 80.0 mm(1)
- 90.0 mm(1)
- 105.0 mm(1)
- 120.0 mm(1)
to
Corner Radius
Corner Radius
- 0.016 in(1)
- 0.031 in(3)
to
Corner Radius
Corner Radius
- 0.4 mm(1)
- 0.8 mm(3)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (2)
- TN7535 (4)
- TTM08 (4)
- TTR (4)
- WK15CM (4)
- WP35CM (4)
- WP40PM (4)
frontEnd
Cutting Width
Cutting Width
- 0.431 in(1)
- 0.545 in(1)
- 0.704 in(1)
- 0.86 in(1)
to
Cutting Width
Cutting Width
- 10.951 mm(1)
- 13.851 mm(1)
- 17.85 mm(1)
- 21.85 mm(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.243 in(1)
- 0.332 in(1)
- 0.412 in(1)
- 0.488 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 6.176 mm(1)
- 8.425 mm(1)
- 10.451 mm(1)
- 12.4 mm(1)
to
Neck Diameter
Neck Diameter
- 0.494 in(1)
- 0.591 in(1)
- 0.748 in(1)
- 0.987 in(1)
to
Neck Diameter
Neck Diameter
- 12.55 mm(1)
- 15.0 mm(1)
- 19.0 mm(1)
- 25.076 mm(1)
to
backEnd
Back-End Diameter
Back-End Diameter
- 16.0 mm(2)
- 25.0 mm(1)
- 32.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.63 in(2)
- 0.984 in(1)
- 1.26 in(1)
to
No filters matching ""
