ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

WIDIAにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

M680 - Tool Bodies XP16

フィルタを選択
フィルタ
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (19)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(19)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(19)
    • M Stainless Steel (19)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(19)
    • K Cast Iron (19)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(19)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(19)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
    • N Non-Ferrous Materials (19)
      • N1
        Wrought Aluminum (19)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(19)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (17)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (17)
      • N6
        Carbon, Graphite Composites, CFRP (17)
      • N7
        MMC's (17)
    • S High-Temp Alloys (19)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
    • H Hardened Materials (19)
      • H1
        Hardened Materials 44-48 HRC(19)
    Select All Star
    • CN (8)
    • DE (11)
    • GB (1)
    • IN (9)
    Applications
    Applications
    • Face MillingFace Milling (19)
    • Shoulder MillingShoulder Milling (19)
    • Shoulder Square EndShoulder Square End (17)
    • Slot MillingSlot Milling (19)
    • Slot Square EndSlot Square End (17)
    Cutting Diameter
    Cutting Diameter
    • 0.63 in(1)
    • 0.787 in(1)
    • 0.984 in(2)
    • 1.0 in(1)
    • 1.26 in(2)
    • 1.379 in(1)
    • 1.575 in(3)
    • 1.969 in(2)
    • 2.0 in(1)
    • 2.48 in(1)
    • 3.15 in(1)
    • 3.938 in(1)
    • 4.921 in(1)
    • 6.299 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 16.0 mm(1)
    • 20.0 mm(1)
    • 25.0 mm(2)
    • 25.401 mm(1)
    • 32.0 mm(2)
    • 35.0 mm(1)
    • 40.0 mm(3)
    • 50.0 mm(2)
    • 50.801 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(1)
    • 125.0 mm(1)
    • 160.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.0 mm(2)
    • 13.976 mm(3)
    • 14.0 mm(12)
    • 15.3 mm(1)
    • 15.351 mm(1)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.354 in(2)
    • 0.55 in(3)
    • 0.551 in(12)
    • 0.602 in(1)
    • 0.604 in(1)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.063 in(1)
    • 1.181 in(1)
    • 1.26 in(1)
    • 1.5 in(1)
    • 1.536 in(2)
    • 1.575 in(6)
    • 1.72 in(1)
    • 1.772 in(1)
    • 1.969 in(3)
    • 2.48 in(2)
    Reach MintoReach Max
    Reach
    Reach
    • 27.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(2)
    • 40.0 mm(6)
    • 43.7 mm(1)
    • 45.0 mm(1)
    • 50.0 mm(3)
    • 63.0 mm(2)
    Reach MintoReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (5)
    • B-Cutter Retention Screw (3)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (4)
    • Weldon (6)
    Number of Flutes
    Number of Flutes
    • 12 (1)
    • 2 (5)
    • 3 (3)
    • 4 (4)
    • 5 (3)
    • 6 (1)
    • 8 (1)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(1)
    • 1.575 in(3)
    • 1.772 in(1)
    • 1.969 in(2)
    • 2.047 in(1)
    • 2.48 in(5)
    • 2.953 in(1)
    • 3.228 in(1)
    • 3.781 in(1)
    • 3.938 in(1)
    • 4.0 in(1)
    • 4.331 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(1)
    • 40.0 mm(3)
    • 45.0 mm(1)
    • 50.0 mm(2)
    • 52.0 mm(1)
    • 63.0 mm(5)
    • 75.0 mm(1)
    • 82.0 mm(1)
    • 96.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(1)
    • 110.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(19)
    • 0.031 in(19)
    • 0.047 in(19)
    • 0.063 in(19)
    • 0.066 in(17)
    • 0.079 in(19)
    • 0.098 in(17)
    • 0.125 in(17)
    • 0.157 in(17)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(19)
    • 0.8 mm(19)
    • 1.201 mm(19)
    • 1.6 mm(19)
    • 1.675 mm(17)
    • 2.0 mm(19)
    • 2.5 mm(17)
    • 3.176 mm(17)
    • 4.0 mm(17)
    Corner Radius MintoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (19)
    • THM-U (17)
    • THR (19)
    • TN2510 (19)
    • TN25M (19)
    • TN450 (19)
    • TN5515 (19)
    • TN6501 (17)
    • TN6502 (17)
    • TN6510 (17)
    • TN6520 (17)
    • TN6525 (17)
    • TN6540 (17)
    • TN7525 (19)
    • TN7535 (19)
    • TTI25 (19)
    • TTM08 (19)
    • TTR (17)
    • WK15CM (19)
    • WK15PM (2)
    • WP35CM (19)
    • WP40PM (17)
    • WS30PM (17)
    • WU20PM (19)
    Rough Finish
    Rough Finish
    • FR (5)
    frontEnd
    Insert Shape
    Insert Shape
    • X-PARALLELOGRAM 80 (19)
    • X-RECTANGLE MILL 4 90 (17)
    • X-RH0MBIC 70 (2)
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (6)
    • SCREW-ON (4)
    • SHELL MILL (9)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(4)
    • 24.375 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 27.0 mm(1)
    • 28.0 mm(3)
    • 32.0 mm(3)
    • 40.0 mm(2)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.866 in(4)
    • 0.96 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.063 in(1)
    • 1.102 in(3)
    • 1.26 in(3)
    • 1.575 in(2)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    M680-16 • Weldon®エンドミル • メトリック
    (2)

    M680-16 • Weldon®エンドミル • メトリック

    M680-16 • シェルミル • メトリック
    (8)

    M680-16 • シェルミル • メトリック

    M680-16 • スクリューオンエンドミル • メトリック
    (4)

    M680-16 • スクリューオンエンドミル • メトリック

    M680-16 • Weldon®エンドミル • メトリック
    (3)

    M680-16 • Weldon®エンドミル • メトリック

    M680 • Weldon®シャンク • インチ
    (1)

    M680 • Weldon®シャンク • インチ

    M680 • シェルミル • インチ
    (1)

    M680 • シェルミル • インチ

    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    有効な名前を入力してください
    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO製品型番 材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk