ようこそ
設定をご確認ください
設定の更新
提案製品
Product Family suggestions
ソリューション編集
ソリューション追加
ソリューション名: {{SolutionName}}- 製品
- /
- ソリッドエンドミル
- /
- 高性能ソリッドカーバイドエンドミル
- /
- VariMill™
- /
- VariMill II • Series 5V0C • Square End • 5 Flute • Inch
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
VariMill II • Series 5V0C • Square End • 5 Flute • Inch
VariMill™
特徴と利点
- Unequal flute spacing.
- Center cutting.
- Single tool for both roughing and finishing operations requiring fewer setups.
- Slotting up to 1 x D.
- Standard items listed. Additional styles and coatings made to order.
使用法と用途
- Trochoidal Milling
- ランピング加工:ブランク
- 溝加工:スクエアエンド
- コーナーのタイプ:コーナーR
- コーナーのタイプ:スクエアエンド
- シャンク — ストレート プレーン
- シャンク — ストレートWeldon
- 側面加工/ショルダー加工:スクエアエンド
- ねじれ角: 38°
- Tool Dimensions: Flute Configuration: 5
- Safe-Lockシャンク
Application Data • VariMill II™ • Series 5V0C • Inch
Side Milling (A) and Slotting (B) | WP15PE | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||||
A | B | Cutting Speed
|
D1
|
||||||||||||||
frac. | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | ||||||||
Material
|
ap | ae | ap | Min | Max | dec. | 0.1875 | 0.2500 | 0.3125 | 0.3750 | 0.5000 | 0.6250 | 0.7500 | 1.0000 | 1.2500 | ||
P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
1 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 | |
2 | 1.5 x D | 0.5 x D | 1 x D | 460 | – | 620 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 | |
4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | – | 490 | IPT | 0.0010 | 0.0014 | 0.0017 | 0.0020 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 | |
5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 | |
M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | – | 380 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
2 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 230 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 | |
K | 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 490 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
2 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 460 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 430 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | IPT | 0.0006 | 0.0008 | 0.0010 | 0.0012 | 0.0015 | 0.0018 | 0.0021 | 0.0024 | 0.0026 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 80 | – | 130 | IPT | 0.0006 | 0.0008 | 0.0010 | 0.0012 | 0.0015 | 0.0018 | 0.0021 | 0.0024 | 0.0026 | |
4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | IPT | 0.0008 | 0.0011 | 0.0014 | 0.0017 | 0.0021 | 0.0025 | 0.0028 | 0.0033 | 0.0036 | |
H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | – | 460 | IPT | 0.0010 | 0.0014 | 0.0017 | 0.0020 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |