ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

WIDIAにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

    TopGroove™

    フィルタを選択
    フィルタ
    フィルタ
      フィルタ表示
      メートル
      インチ
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (463)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(463)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(463)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(463)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(463)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(463)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(463)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(463)
      • M Stainless Steel (475)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(475)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(475)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(475)
      • K Cast Iron (474)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(474)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(474)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(474)
      • N Non-Ferrous Materials (475)
        • N1
          Wrought Aluminum (475)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(475)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(475)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (121)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (475)
        • N6
          Carbon, Graphite Composites, CFRP (475)
        • N7
          MMC's (121)
      • S High-Temp Alloys (475)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(475)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(475)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(475)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(475)
      • H Hardened Materials (108)
        • H1
          Hardened Materials 44-48 HRC(108)
        • H2
          Hardened Materials 48-55 HRC(108)
        • H3
          Hardened Materials 56-60 HRC(98)
        • H4
          Hardened Materials >60 HRC(98)
      Select All Star
      • DE (15)
      • IN (3)
      • US (190)
      Applications
      Applications
      • BoringBoring (3)
      • Face GroovingFace Grooving (426)
      • GroovingGrooving (422)
      • ID GroovingID Grooving (305)
      • ID Thread TurningID Thread Turning (44)
      • OD Thread TurningOD Thread Turning (67)
      • Plunge TurningPlunge Turning (264)
      • ProfilingProfiling (82)
      • ThreadingThreading (68)
      • TurningTurning (3)
      Type of Thread
      Type of Thread
      • 60 (107)
      • ACME (66)
      • API RD (45)
      • BSW (23)
      • BUTTRESS (22)
      • STUB ACME (45)
      • UN (93)
      • UNJ (23)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (450)
      • Lightly Interrupted Cut (450)
      • Smooth Cut (466)
      • Varying Depth of Cut (458)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (111)
      Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Boring Bar Shank (44)
      • Toolholder (47)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (174)
      • 2.0 (403)
      Cutting Edges Per Insert MintoCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 2.5 in(1)
      • 3.15 in(1)
      • 3.5 in(1)
      • 3.938 in(1)
      • 4.0 in(2)
      • 4.5 in(9)
      • 4.921 in(8)
      • 5.0 in(9)
      • 5.906 in(18)
      • 6.0 in(22)
      • 6.694 in(2)
      • 7.087 in(2)
      • 7.875 in(4)
      • 8.0 in(3)
      • 9.843 in(2)
      • 10.0 in(5)
      • 11.811 in(3)
      • 12.0 in(6)
      • 13.781 in(1)
      • 14.0 in(7)
      • 16.0 in(4)
      Over All Length [L] MintoOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 63.5 mm(1)
      • 80.0 mm(1)
      • 88.9 mm(1)
      • 100.0 mm(1)
      • 101.601 mm(2)
      • 114.301 mm(9)
      • 125.0 mm(8)
      • 127.0 mm(9)
      • 150.0 mm(18)
      • 152.4 mm(22)
      • 170.0 mm(2)
      • 180.0 mm(2)
      • 200.0 mm(4)
      • 203.201 mm(3)
      • 250.0 mm(2)
      • 254.0 mm(5)
      • 300.0 mm(3)
      • 304.8 mm(6)
      • 350.0 mm(1)
      • 355.6 mm(7)
      • 406.401 mm(4)
      Over All Length [L] MintoOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.003 in(73)
      • 0.004 in(90)
      • 0.006 in(9)
      • 0.007 in(97)
      • 0.008 in(280)
      • 0.01 in(51)
      • 0.012 in(23)
      • 0.014 in(76)
      • 0.016 in(45)
      • 0.02 in(43)
      • 0.023 in(100)
      • 0.03 in(43)
      • 0.031 in(100)
      • 0.039 in(91)
      • 0.047 in(94)
      • 0.049 in(87)
      • 0.06 in(90)
      • 0.062 in(49)
      • 0.063 in(76)
      • 0.069 in(88)
      • 0.078 in(48)
      • 0.079 in(67)
      • 0.089 in(65)
      • 0.095 in(68)
      • 0.098 in(20)
      • 0.125 in(24)
      Corner Radius MintoCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.076 mm(73)
      • 0.1 mm(90)
      • 0.151 mm(9)
      • 0.176 mm(97)
      • 0.2 mm(280)
      • 0.225 mm(23)
      • 0.25 mm(51)
      • 0.301 mm(23)
      • 0.325 mm(76)
      • 0.351 mm(45)
      • 0.4 mm(45)
      • 0.5 mm(43)
      • 0.576 mm(100)
      • 0.75 mm(43)
      • 0.775 mm(100)
      • 1.0 mm(91)
      • 1.201 mm(94)
      • 1.25 mm(87)
      • 1.5 mm(90)
      • 1.576 mm(49)
      • 1.6 mm(76)
      • 1.75 mm(88)
      • 1.975 mm(48)
      • 2.0 mm(67)
      • 2.25 mm(65)
      • 2.401 mm(68)
      • 2.5 mm(20)
      • 3.176 mm(24)
      Corner Radius MintoCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(365)
      Corner Chamfer MintoCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(365)
      Corner Chamfer MintoCorner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM (95)
      • TN10P (70)
      • TN6010 (231)
      • TN6025 (337)
      • TN7110 (102)
      • WU10HT (24)
      • WU10PT (35)
      • WU25PT (23)
      Hand Of Tool
      Hand Of Tool
      • L (34)
      • R (57)
      Wiper Insert
      Wiper Insert
      • N (475)
      F Dimension
      F Dimension
      • 6.551 mm(2)
      • 7.0 mm(2)
      • 10.3 mm(1)
      • 11.0 mm(4)
      • 11.101 mm(2)
      • 12.0 mm(1)
      • 12.701 mm(5)
      • 13.0 mm(2)
      • 14.275 mm(3)
      • 15.875 mm(3)
      • 16.0 mm(2)
      • 16.25 mm(2)
      • 17.0 mm(4)
      • 17.475 mm(4)
      • 19.05 mm(1)
      • 19.425 mm(1)
      • 20.0 mm(1)
      • 22.0 mm(2)
      • 22.225 mm(2)
      • 25.0 mm(3)
      • 25.401 mm(8)
      • 27.0 mm(3)
      • 31.75 mm(16)
      • 32.0 mm(7)
      • 32.525 mm(1)
      • 34.926 mm(2)
      • 35.0 mm(1)
      • 38.1 mm(4)
      • 40.0 mm(2)
      F Dimension MintoF Dimension Max
      F Dimension
      F Dimension
      • 0.258 in(2)
      • 0.276 in(2)
      • 0.406 in(1)
      • 0.433 in(4)
      • 0.437 in(2)
      • 0.473 in(1)
      • 0.5 in(5)
      • 0.512 in(2)
      • 0.562 in(3)
      • 0.625 in(3)
      • 0.63 in(2)
      • 0.64 in(2)
      • 0.669 in(4)
      • 0.689 in(4)
      • 0.75 in(1)
      • 0.765 in(1)
      • 0.787 in(1)
      • 0.866 in(2)
      • 0.875 in(2)
      • 0.984 in(3)
      • 1.0 in(8)
      • 1.063 in(3)
      • 1.25 in(16)
      • 1.26 in(7)
      • 1.281 in(1)
      • 1.375 in(2)
      • 1.379 in(1)
      • 1.5 in(4)
      • 1.575 in(2)
      F Dimension MintoF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 mm(55)
      • 11.175 mm(2)
      • 11.5 mm(2)
      • 18.5 mm(2)
      • 18.55 mm(2)
      • 20.326 mm(1)
      • 22.0 mm(2)
      • 25.401 mm(2)
      • 26.0 mm(2)
      • 28.576 mm(2)
      • 34.0 mm(4)
      • 34.926 mm(4)
      • 41.301 mm(29)
      • 44.0 mm(2)
      • 44.45 mm(2)
      • 47.6 mm(27)
      • 50.801 mm(2)
      • 54.0 mm(3)
      • 55.875 mm(1)
      • 56.625 mm(3)
      • 57.151 mm(3)
      • 57.2 mm(12)
      • 60.325 mm(2)
      • 63.5 mm(7)
      • 69.851 mm(2)
      • 70.0 mm(1)
      • 76.2 mm(1)
      • 88.9 mm(139)
      • 139.701 mm(165)
      • 174.601 mm(57)
      • 209.601 mm(43)
      • 222.3 mm(26)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 in(55)
      • 0.44 in(2)
      • 0.453 in(2)
      • 0.728 in(2)
      • 0.73 in(2)
      • 0.8 in(1)
      • 0.866 in(2)
      • 1.0 in(2)
      • 1.024 in(2)
      • 1.125 in(2)
      • 1.339 in(4)
      • 1.375 in(4)
      • 1.627 in(29)
      • 1.732 in(2)
      • 1.75 in(2)
      • 1.874 in(27)
      • 2.0 in(2)
      • 2.126 in(3)
      • 2.2 in(1)
      • 2.229 in(3)
      • 2.25 in(3)
      • 2.253 in(12)
      • 2.375 in(2)
      • 2.5 in(7)
      • 2.75 in(2)
      • 2.757 in(1)
      • 3.0 in(1)
      • 3.5 in(139)
      • 5.5 in(165)
      • 6.875 in(57)
      • 8.252 in(43)
      • 8.752 in(26)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 393.661 in(471)
      Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 9999.0 mm(471)
      Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • E (51)
      • S (40)
      Rake Angle Style
      Rake Angle Style
      • NEUTRAL (ZERO) (91)
      Maximum Bore Depth
      Maximum Bore Depth
      • 1.0 in(7)
      • 1.23 in(1)
      • 1.232 in(1)
      • 1.29 in(1)
      • 1.5 in(1)
      • 1.891 in(2)
      • 2.0 in(15)
      • 2.5 in(3)
      • 2.52 in(2)
      • 3.0 in(2)
      • 3.15 in(2)
      • 3.938 in(4)
      • 4.0 in(6)
      • 5.0 in(3)
      • 5.039 in(2)
      • 6.0 in(2)
      • 6.299 in(3)
      • 7.0 in(2)
      • 7.875 in(1)
      • 8.0 in(4)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 25.401 mm(7)
      • 31.25 mm(1)
      • 31.3 mm(1)
      • 32.775 mm(1)
      • 38.1 mm(1)
      • 48.0 mm(2)
      • 50.801 mm(15)
      • 63.5 mm(3)
      • 64.0 mm(2)
      • 76.2 mm(2)
      • 80.0 mm(2)
      • 100.0 mm(4)
      • 101.601 mm(6)
      • 127.0 mm(3)
      • 128.0 mm(2)
      • 152.4 mm(2)
      • 160.0 mm(3)
      • 177.8 mm(2)
      • 200.0 mm(1)
      • 203.201 mm(4)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • S (44)
      frontEnd
      Clamp Style
      Clamp Style
      • N (111)
      Cutting Width
      Cutting Width
      • 0.02 in(42)
      • 0.031 in(50)
      • 0.039 in(93)
      • 0.041 in(24)
      • 0.047 in(107)
      • 0.055 in(43)
      • 0.058 in(41)
      • 0.06 in(97)
      • 0.062 in(128)
      • 0.067 in(42)
      • 0.069 in(88)
      • 0.073 in(47)
      • 0.077 in(43)
      • 0.078 in(49)
      • 0.079 in(109)
      • 0.088 in(90)
      • 0.089 in(65)
      • 0.094 in(25)
      • 0.095 in(117)
      • 0.098 in(99)
      • 0.108 in(90)
      • 0.119 in(125)
      • 0.125 in(146)
      • 0.126 in(47)
      • 0.128 in(87)
      • 0.138 in(111)
      • 0.147 in(25)
      • 0.152 in(41)
      • 0.156 in(53)
      • 0.157 in(77)
      • 0.167 in(46)
      • 0.177 in(70)
      • 0.188 in(57)
      • 0.189 in(83)
      • 0.192 in(25)
      • 0.195 in(24)
      • 0.196 in(47)
      • 0.197 in(22)
      • 0.217 in(19)
      • 0.237 in(19)
      • 0.25 in(31)
      Cutting Width MintoCutting Width Max
      Cutting Width
      Cutting Width
      • 0.5 mm(42)
      • 0.775 mm(46)
      • 0.8 mm(43)
      • 1.0 mm(93)
      • 1.05 mm(24)
      • 1.201 mm(107)
      • 1.401 mm(43)
      • 1.475 mm(41)
      • 1.5 mm(97)
      • 1.576 mm(128)
      • 1.701 mm(42)
      • 1.75 mm(88)
      • 1.826 mm(47)
      • 1.951 mm(43)
      • 1.975 mm(49)
      • 2.0 mm(109)
      • 2.2 mm(88)
      • 2.225 mm(25)
      • 2.25 mm(65)
      • 2.375 mm(25)
      • 2.401 mm(117)
      • 2.5 mm(99)
      • 2.75 mm(90)
      • 3.0 mm(125)
      • 3.176 mm(146)
      • 3.2 mm(47)
      • 3.25 mm(87)
      • 3.5 mm(111)
      • 3.725 mm(25)
      • 3.85 mm(41)
      • 3.95 mm(52)
      • 3.975 mm(24)
      • 4.0 mm(77)
      • 4.25 mm(46)
      • 4.5 mm(70)
      • 4.775 mm(57)
      • 4.801 mm(83)
      • 4.875 mm(25)
      • 4.95 mm(24)
      • 4.976 mm(47)
      • 5.0 mm(22)
      • 5.5 mm(19)
      • 6.0 mm(19)
      • 6.351 mm(31)
      Cutting Width MintoCutting Width Max
      Insert Size
      Insert Size
      • 1 (6)
      • 2 (41)
      • 3 (47)
      • 4 (15)
      • 6 (2)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.067 in(1)
      • 0.138 in(23)
      • 0.21 in(28)
      • 0.225 in(1)
      • 0.294 in(13)
      • 0.334 in(2)
      Maximum Cutting Depth MintoMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 1.701 mm(1)
      • 3.5 mm(23)
      • 5.325 mm(28)
      • 5.726 mm(1)
      • 7.476 mm(13)
      • 8.475 mm(2)
      Maximum Cutting Depth MintoMaximum Cutting Depth Max
      Maximum Cutting Insert Depth
      Maximum Cutting Insert Depth
      • 0.65 mm(3)
      • 0.75 mm(30)
      • 1.026 mm(55)
      • 1.1 mm(42)
      • 1.326 mm(3)
      • 1.901 mm(2)
      • 1.975 mm(4)
      • 2.551 mm(3)
      • 2.75 mm(2)
      • 2.926 mm(32)
      • 3.801 mm(10)
      • 3.85 mm(3)
      Maximum Cutting Insert Depth MintoMaximum Cutting Insert Depth Max
      Maximum Cutting Insert Depth
      Maximum Cutting Insert Depth
      • 0.027 in(3)
      • 0.03 in(30)
      • 0.04 in(55)
      • 0.044 in(42)
      • 0.053 in(3)
      • 0.075 in(2)
      • 0.078 in(4)
      • 0.1 in(3)
      • 0.108 in(2)
      • 0.115 in(32)
      • 0.15 in(10)
      • 0.152 in(3)
      Maximum Cutting Insert Depth MintoMaximum Cutting Insert Depth Max
      insertGeometry
      Shape
      Shape
      • TN-TOP NOTCH (365)
      Insert Seat Size
      Insert Seat Size
      • 1 (3)
      • 2 (119)
      • 3 (192)
      • 4 (51)
      Cutting Tool Material
      Cutting Tool Material
      • H W (475)
      backEnd
      Connection Type
      Connection Type
      • BORING BAR (44)
      • SQUARE SHANK (47)
      Back-End Diameter
      Back-End Diameter
      • 9.525 mm(1)
      • 10.0 mm(1)
      • 12.0 mm(3)
      • 12.701 mm(3)
      • 15.875 mm(3)
      • 16.0 mm(2)
      • 19.05 mm(2)
      • 20.0 mm(2)
      • 25.0 mm(4)
      • 25.401 mm(6)
      • 31.75 mm(3)
      • 32.0 mm(2)
      • 38.1 mm(2)
      • 40.0 mm(3)
      • 44.45 mm(2)
      • 50.0 mm(1)
      • 50.801 mm(4)
      Back-End Diameter MintoBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.375 in(1)
      • 0.394 in(1)
      • 0.473 in(3)
      • 0.5 in(3)
      • 0.625 in(3)
      • 0.63 in(2)
      • 0.75 in(2)
      • 0.787 in(2)
      • 0.984 in(4)
      • 1.0 in(6)
      • 1.25 in(3)
      • 1.26 in(2)
      • 1.5 in(2)
      • 1.575 in(3)
      • 1.75 in(2)
      • 1.969 in(1)
      • 2.0 in(4)
      Back-End Diameter MintoBack-End Diameter Max
      Shank Height
      Shank Height
      • 0.375 in(1)
      • 0.473 in(2)
      • 0.5 in(4)
      • 0.625 in(3)
      • 0.63 in(2)
      • 0.75 in(6)
      • 0.787 in(4)
      • 0.984 in(6)
      • 1.0 in(12)
      • 1.25 in(5)
      • 1.26 in(2)
      Shank Height MintoShank Height Max
      Shank Height
      Shank Height
      • 9.525 mm(1)
      • 12.0 mm(2)
      • 12.701 mm(4)
      • 15.875 mm(3)
      • 16.0 mm(2)
      • 19.05 mm(6)
      • 20.0 mm(4)
      • 25.0 mm(6)
      • 25.401 mm(12)
      • 31.75 mm(5)
      • 32.0 mm(2)
      Shank Height MintoShank Height Max
      Shank Width
      Shank Width
      • 0.375 in(1)
      • 0.473 in(2)
      • 0.5 in(4)
      • 0.625 in(3)
      • 0.63 in(2)
      • 0.75 in(6)
      • 0.787 in(4)
      • 0.984 in(6)
      • 1.0 in(13)
      • 1.25 in(4)
      • 1.26 in(2)
      Shank Width MintoShank Width Max
      Shank Width
      Shank Width
      • 9.525 mm(1)
      • 12.0 mm(2)
      • 12.701 mm(4)
      • 15.875 mm(3)
      • 16.0 mm(2)
      • 19.05 mm(6)
      • 20.0 mm(4)
      • 25.0 mm(6)
      • 25.401 mm(13)
      • 31.75 mm(4)
      • 32.0 mm(2)
      Shank Width MintoShank Width Max
      No filters matching ""
      溝入れインサート
      (365)

      溝入れインサート

      ツールホルダー
      (67)

      ツールホルダー

      ボーリングバー
      (44)

      ボーリングバー

      マイソリューションページにを追加しようとしています. 続行しますか?
      Select the destination where you want to move to.
      新規 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      有効な名前を入力してください
      product-image
      Please adjust the following properties from

      ISO製品型番

      ANSI製品型番

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      Product data

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      ダッシュボード情報を表示するには、ログインする必要があります
      Session expired due to inactivity, please login again
      カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
      アイテムがカートに正常に追加されました
      カートを表示

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO製品型番材種  

      You are about to leave the Solution building process.

      Are you sure you want to leave?