M1600
16-Edged Face Mill
M1600
Versatile Face Mill for All Machine Conditions
This versatile, 16-edged face mill for medium roughing or semi-finishing of steel, stainless steel, cast iron and nodular iron components will perform in all machine conditions including low-power machines, unstable, non-rigid set-ups, long overhangs, weak machines, or even weak fixture conditions.
Features and Benefits
- Universal -MM geometry insert in grades WP35CM, WU20PM, WK15CM
- 44º cutter lead angle
- Depth of Cut (DOC): (4mm Ap1 max)
- Precision ground insert
- Smart insert design engineered to resist shock loads resulting in longer tool life
Thrive in a Variety of Machine Setups
When you need the lowest cost-per-edge in medium-roughing applications, look no further than M1600. This face mill creates a smooth cut allowing for lower power consumption on the machine which results in a longer life on the spindle giving you more value for your money.
Watch as we put M1600 side milling roughing to the test in cast iron, steel, and stainless steel.
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (22)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
- M Stainless Steel (22)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
- K Cast Iron (27)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
- N Non-Ferrous Materials (22)
- N1Wrought Aluminum (22)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(22)
- N3High-Silicon Aluminum Alloys Si >12.2%(22)
- S High-Temp Alloys (22)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(21)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(21)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(21)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
- H Hardened Materials (23)
- H1Hardened Materials 44-48 HRC(23)
Select All Star
- CN (14)
- DE (16)
- IN (17)
Applications
Applications
Chamfer Milling (12)
Face Milling (19)
Cutting Diameter
Cutting Diameter
- 1.969 in(1)
- 2.0 in(1)
- 2.48 in(1)
- 2.5 in(1)
- 3.0 in(2)
- 3.15 in(2)
- 3.938 in(2)
- 4.0 in(2)
- 4.921 in(2)
- 5.0 in(1)
- 6.0 in(2)
- 6.299 in(2)
to
Cutting Diameter
Cutting Diameter
- 50.0 mm(1)
- 50.801 mm(1)
- 63.0 mm(1)
- 63.5 mm(1)
- 76.2 mm(2)
- 80.0 mm(2)
- 100.0 mm(2)
- 101.601 mm(2)
- 125.0 mm(2)
- 127.0 mm(1)
- 152.4 mm(2)
- 160.0 mm(2)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
- 60.725 mm(1)
- 61.526 mm(1)
- 73.726 mm(1)
- 74.226 mm(1)
- 82.65 mm(1)
- 86.45 mm(1)
- 86.926 mm(1)
- 90.726 mm(1)
- 106.45 mm(1)
- 108.051 mm(1)
- 110.726 mm(1)
- 112.325 mm(1)
- 131.451 mm(1)
- 135.725 mm(1)
- 137.725 mm(1)
- 158.851 mm(1)
- 163.125 mm(1)
- 166.451 mm(1)
- 170.726 mm(1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
- 2.391 in(1)
- 2.422 in(1)
- 2.903 in(1)
- 2.922 in(1)
- 3.254 in(1)
- 3.404 in(1)
- 3.422 in(1)
- 3.572 in(1)
- 4.191 in(1)
- 4.255 in(1)
- 4.359 in(1)
- 4.422 in(1)
- 5.175 in(1)
- 5.344 in(1)
- 5.422 in(1)
- 6.255 in(1)
- 6.422 in(1)
- 6.553 in(1)
- 6.721 in(1)
to
Cutting Length
Cutting Length
- 2.1 mm(7)
- 3.7 mm(12)
to
Cutting Length
Cutting Length
- 0.083 in(7)
- 0.146 in(12)
to
Reach
Reach
- 1.575 in(4)
- 1.75 in(1)
- 1.969 in(6)
- 2.0 in(1)
- 2.38 in(2)
- 2.48 in(5)
to
Reach
Reach
- 40.0 mm(4)
- 44.45 mm(1)
- 50.0 mm(6)
- 50.801 mm(1)
- 60.45 mm(2)
- 63.0 mm(5)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 42.0 (7)
- 43.0 (12)
to
Connection Style
Connection Style
- A-Socket Head Cap Screw (8)
- B-Cutter Retention Screw (9)
- C-Bolt Circle (2)
Number of Flutes
Number of Flutes
- 10 (2)
- 11 (2)
- 12 (1)
- 13 (2)
- 16 (2)
- 4 (2)
- 5 (2)
- 7 (2)
- 8 (2)
- 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 4.0 (9)
- 16.0 (25)
to
Over All Length [L]
Over All Length [L]
- 1.575 in(4)
- 1.75 in(1)
- 1.969 in(6)
- 2.0 in(1)
- 2.38 in(2)
- 2.48 in(5)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(4)
- 44.45 mm(1)
- 50.0 mm(6)
- 50.801 mm(1)
- 60.45 mm(2)
- 63.0 mm(5)
to
Corner Radius
Corner Radius
- 0.0 in(9)
- 0.031 in(10)
- 0.047 in(15)
to
Corner Radius
Corner Radius
- 0.0 mm(9)
- 0.8 mm(10)
- 1.201 mm(15)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(9)
- 0.601 mm(10)
- 0.775 mm(15)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(9)
- 0.024 in(10)
- 0.031 in(15)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM-F (8)
- WK15CM (21)
- WP35CM (13)
- WU10PM (9)
- WU20PM (21)
Hand Of Tool
Hand Of Tool
- R (19)
Wiper Insert
Wiper Insert
- Y (8)
frontEnd
Insert Shape
Insert Shape
- O-OCTOGON 135 (25)
- X-RHOMBIC 83 (9)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
- O-OCTOGON 135 (6)
- X-RHOMBIC 83 (2)
Insert IC Size
Insert IC Size
- 10.0 mm(3)
- 12.701 mm(2)
- 16.875 mm(3)
to
Insert IC Size
Insert IC Size
- 0.394 in(3)
- 0.5 in(2)
- 0.664 in(3)
to
Cutting Edge Length
Cutting Edge Length
- 4.101 mm(3)
- 6.875 mm(3)
- 8.725 mm(1)
to
Cutting Edge Length
Cutting Edge Length
- 0.161 in(3)
- 0.271 in(3)
- 0.345 in(1)
to
Chip Breaker CBMD
Chip Breaker CBMD
- MM (6)
Cutting Tool Material
Cutting Tool Material
- H W (8)
Tolerance Class
Tolerance Class
- G (6)
- H (2)
backEnd
Connection Type
Connection Type
- SHELL MILL (19)
Back-End Diameter
Back-End Diameter
- 19.05 mm(2)
- 22.0 mm(2)
- 25.401 mm(2)
- 27.0 mm(2)
- 32.0 mm(2)
- 38.1 mm(3)
- 40.0 mm(4)
- 50.801 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(2)
- 0.866 in(2)
- 1.0 in(2)
- 1.063 in(2)
- 1.26 in(2)
- 1.5 in(3)
- 1.575 in(4)
- 2.0 in(2)
to
No filters matching ""
