eBore™ Bridges
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
- M Stainless Steel (2)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
- K Cast Iron (2)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
- N Non-Ferrous Materials (2)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N6Carbon, Graphite Composites, CFRP (2)
- N7MMC's (2)
- S High-Temp Alloys (2)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
- H Hardened Materials (2)
- H1Hardened Materials 44-48 HRC(2)
- H2Hardened Materials 48-55 HRC(2)
- H3Hardened Materials 56-60 HRC(2)
- H4Hardened Materials >60 HRC(2)
- C CFRP Materials (2)
- C1CFRP, CFRP / CFRP (2)
- C2CFRP / Aluminium CFRP / Non-Ferrous (2)
Applications
Applications
Blind & Cross Hole Finishing (11)
Blind Hole Finishing (11)
Through & Cross Hole Finishing (11)
Through Hole Finishing (11)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (2)
- Lightly Interrupted Cut (2)
- Smooth Cut (2)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (1)
- 91.0 (1)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.592 in(1)
- 1.205 in(1)
to
Over All Length [L]
Over All Length [L]
- 15.025 mm(1)
- 30.6 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(1)
- 0.001 in(1)
- 0.002 in(1)
- 0.004 in(2)
- 0.008 in(2)
- 0.016 in(2)
- 0.031 in(2)
- 0.047 in(2)
- 0.063 in(1)
to
Corner Radius
Corner Radius
- 0.0 mm(1)
- 0.025 mm(1)
- 0.05 mm(1)
- 0.1 mm(2)
- 0.2 mm(2)
- 0.4 mm(2)
- 0.8 mm(2)
- 1.201 mm(2)
- 1.6 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(2)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (1)
- K313 (2)
- KB1345 (2)
- KB1610 (1)
- KB1630 (2)
- KB5610 (1)
- KB5630 (1)
- KBH10 (1)
- KBH20 (2)
- KC5010 (2)
- KC5025 (2)
- KC5410 (2)
- KC730 (2)
- KC850 (2)
- KCK05 (2)
- KCK15 (2)
- KCK15B (2)
- KCK20 (2)
- KCK20B (2)
- KCM15 (1)
- KCM15B (2)
- KCM25 (2)
- KCM25B (2)
- KCM25S (1)
- KCM35 (2)
- KCM35B (1)
- KCP05 (1)
- KCP05B (1)
- KCP10 (2)
- KCP10B (2)
- KCP20S (1)
- KCP25 (2)
- KCP25B (2)
- KCP25C (2)
- KCP30 (2)
- KCP30B (1)
- KCS10 (2)
- KCS10B (2)
- KCS25S (1)
- KCU10 (2)
- KCU10B (2)
- KCU25 (2)
- KCU25B (2)
- KD1400 (1)
- KD1425 (1)
- KN10S (1)
- KT315 (2)
- KT325 (1)
- KTP10 (1)
- KTP25S (1)
- PB250 (1)
- THM (2)
- THM-X (2)
- TN10P (1)
- TN10U (2)
- TN15M (1)
- TN15U (1)
- TN2000 (2)
- TN20K (2)
- TN20P (2)
- TN30M (1)
- TN4000 (1)
- TN6010 (1)
- TN6025 (1)
- WBH10P (1)
- WBH10U (1)
- WBH20P (2)
- WBH30P (1)
- WBK45U (1)
- WDN00U (1)
- WDN25U (1)
- WK05CT (1)
- WK15CT (2)
- WK20CT (2)
- WM15CT (1)
- WM25CT (2)
- WP15CT (2)
- WP25CT (2)
- WP35CT (1)
- WS10PT (2)
- WS25PT (1)
- WU05PT (2)
- WU10HT (2)
- WU10PT (2)
- WU25PT (2)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 200.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 7.875 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 40.158 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 1020.0 mm(2)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
Gage Length
Gage Length
- 0.576 in(1)
- 1.161 in(1)
- 1.772 in(1)
- 3.346 in(4)
- 4.331 in(2)
Gage Length
Gage Length
- 85 mm(4)
- 110 mm(2)
- 45 mm(1)
- 14.601 mm(1)
- 29.5 mm(1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (2)
- B L (2)
- D P (1)
- H T (2)
- H W (2)
Back-End
Back-End Diameter
Back-End Diameter
- 60.0 mm(6)
to
Back-End Diameter
Back-End Diameter
- 2.362 in(6)
to
No filters matching ""
