Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

WGC Modular Blades

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (44)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
    • M Stainless Steel (44)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
    • K Cast Iron (44)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(44)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(44)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(44)
    • N Non-Ferrous Materials (44)
      • N1
        Wrought Aluminum (44)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(44)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(44)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (44)
      • N6
        Carbon, Graphite Composites, CFRP (44)
    • S High-Temp Alloys (44)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
    • H Hardened Materials (22)
      • H1
        Hardened Materials 44-48 HRC(22)
      • H2
        Hardened Materials 48-55 HRC(22)
    Select All Star
    • US (12)
    Applications
    Applications
    • Cut-OffCut-Off (46)
    • Face GroovingFace Grooving (12)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (44)
    • Lightly Interrupted Cut (44)
    • Smooth Cut (44)
    • Varying Depth of Cut (44)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (46)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Over All Length [L]
    Over All Length [L]
    • 1.881 in(10)
    • 1.954 in(4)
    • 2.037 in(4)
    • 2.274 in(4)
    • 2.301 in(4)
    • 2.347 in(4)
    • 2.431 in(2)
    • 2.551 in(8)
    • 2.584 in(2)
    • 2.668 in(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 47.75 mm(10)
    • 49.625 mm(4)
    • 51.75 mm(4)
    • 57.75 mm(4)
    • 58.426 mm(4)
    • 59.625 mm(4)
    • 61.75 mm(2)
    • 64.775 mm(8)
    • 65.625 mm(2)
    • 67.75 mm(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(8)
    • 0.004 in(12)
    • 0.006 in(4)
    • 0.008 in(22)
    • 0.012 in(18)
    • 0.014 in(20)
    • 0.016 in(40)
    • 0.031 in(32)
    • 0.039 in(4)
    • 0.047 in(4)
    • 0.06 in(8)
    • 0.063 in(8)
    • 0.079 in(10)
    • 0.094 in(10)
    • 0.098 in(8)
    • 0.119 in(10)
    • 0.125 in(10)
    • 0.156 in(4)
    • 0.157 in(4)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(8)
    • 0.1 mm(12)
    • 0.151 mm(4)
    • 0.2 mm(22)
    • 0.301 mm(18)
    • 0.325 mm(20)
    • 0.4 mm(40)
    • 0.775 mm(10)
    • 0.8 mm(32)
    • 1.0 mm(4)
    • 1.201 mm(4)
    • 1.5 mm(8)
    • 1.6 mm(8)
    • 2.0 mm(10)
    • 2.375 mm(10)
    • 2.5 mm(8)
    • 3.0 mm(10)
    • 3.176 mm(10)
    • 3.95 mm(4)
    • 4.0 mm(4)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(44)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(44)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WS25PT (8)
    • WU10PT (22)
    • WU25PT (44)
    • WU35PT (12)
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 57.151 mm(12)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 2.25 in(12)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 16.0 in(12)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 406.401 mm(12)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    frontEnd
    Clamp Style
    Clamp Style
    • C (12)
    Cutting Width
    Cutting Width
    • 0.079 in(4)
    • 0.084 in(4)
    • 0.094 in(4)
    • 0.095 in(4)
    • 0.098 in(4)
    • 0.119 in(8)
    • 0.123 in(8)
    • 0.125 in(8)
    • 0.13 in(8)
    • 0.157 in(10)
    • 0.162 in(10)
    • 0.187 in(10)
    • 0.188 in(10)
    • 0.192 in(10)
    • 0.197 in(8)
    • 0.202 in(8)
    • 0.237 in(10)
    • 0.241 in(10)
    • 0.25 in(10)
    • 0.255 in(10)
    • 0.281 in(10)
    • 0.312 in(4)
    • 0.315 in(4)
    • 0.317 in(4)
    • 0.32 in(4)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(4)
    • 2.125 mm(4)
    • 2.375 mm(4)
    • 2.401 mm(4)
    • 2.5 mm(4)
    • 3.0 mm(8)
    • 3.125 mm(8)
    • 3.176 mm(8)
    • 3.301 mm(8)
    • 4.0 mm(10)
    • 4.125 mm(10)
    • 4.75 mm(10)
    • 4.775 mm(10)
    • 4.875 mm(10)
    • 5.0 mm(8)
    • 5.125 mm(8)
    • 6.0 mm(10)
    • 6.125 mm(10)
    • 6.351 mm(10)
    • 6.476 mm(10)
    • 7.125 mm(10)
    • 7.926 mm(4)
    • 8.0 mm(4)
    • 8.05 mm(4)
    • 8.125 mm(4)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • PRISMATIC (46)
    Cartridge Size
    Cartridge Size
    • 50 (24)
    • 65 (10)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.473 in(10)
    • 0.63 in(8)
    • 0.75 in(4)
    • 0.866 in(4)
    • 1.0 in(8)
    • 1.024 in(6)
    • 1.26 in(6)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 12.0 mm(10)
    • 16.0 mm(8)
    • 19.05 mm(4)
    • 22.0 mm(4)
    • 25.401 mm(8)
    • 26.0 mm(6)
    • 32.0 mm(6)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • H W (44)
    No filters matching ""

    WGCM-S-C • Přímé modulární planžety WGC s vnitřním chlazením

    (34)WGCM-S-C • Přímé modulární planžety WGC s vnitřním chlazením

    WGCRM-A • WGC Ranger™ Single-Ended Modular Blades

    (6)WGCRM-A • WGC Ranger™ Single-Ended Modular Blades

    WGCMSU-B • Univerzální planžety WGC Separator • Pro tyče do průměru 3 ″

    (2)WGCMSU-B • Univerzální planžety WGC Separator • Pro tyče do průměru 3 ″

    WGCRM-B • WGC Ranger™ Single-Ended Modular Blades

    (6)WGCRM-B • WGC Ranger™ Single-Ended Modular Blades

    WGCMSU-B • Univerzální planžety WGC Separator • Pro tyče do průměru 2¼″

    (3)WGCMSU-B • Univerzální planžety WGC Separator • Pro tyče do průměru 2¼″
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?