Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Letecké spojovací závitníky

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (1483)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1475)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1475)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1475)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1483)
      • M Stainless Steel (1475)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1475)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1475)
      • K Cast Iron (1455)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(8)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(904)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(543)
      • N Non-Ferrous Materials (642)
        • N1
          Wrought Aluminum (642)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(642)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (642)
      Select All Star
      • CN (2)
      • DE (154)
      • GB (43)
      • IN (2)
      • SG (43)
      • US (369)
      Applications
      Applications
      • Pipe ThreadPipe Thread (59)
      • Tapping Blind HoleTapping Blind Hole (602)
      • Tapping Through HoleTapping Through Hole (639)
      • ThreadingThreading (1491)
      Cutting Length
      Cutting Length
      • 5.0 mm(4)
      • 7.0 mm(31)
      • 8.0 mm(27)
      • 8.201 mm(3)
      • 9.0 mm(8)
      • 9.1 mm(1)
      • 9.201 mm(2)
      • 9.5 mm(1)
      • 9.701 mm(101)
      • 9.9 mm(15)
      • 10.0 mm(24)
      • 10.101 mm(4)
      • 11.0 mm(17)
      • 11.5 mm(2)
      • 11.701 mm(3)
      • 11.8 mm(1)
      • 12.0 mm(48)
      • 12.101 mm(3)
      • 12.201 mm(6)
      • 12.3 mm(2)
      • 12.5 mm(2)
      • 12.701 mm(103)
      • 13.0 mm(42)
      • 13.201 mm(11)
      • 13.4 mm(2)
      • 14.201 mm(1)
      • 14.8 mm(27)
      • 14.9 mm(7)
      • 15.0 mm(89)
      • 15.101 mm(2)
      • 15.8 mm(10)
      • 16.0 mm(62)
      • 17.0 mm(6)
      • 17.3 mm(11)
      • 17.475 mm(2)
      • 17.5 mm(68)
      • 17.901 mm(1)
      • 18.0 mm(44)
      • 18.7 mm(15)
      • 18.8 mm(1)
      • 18.901 mm(7)
      • 19.0 mm(22)
      • 19.05 mm(10)
      • 19.1 mm(52)
      • 20.0 mm(18)
      • 21.0 mm(39)
      • 22.0 mm(10)
      • 22.3 mm(11)
      • 22.401 mm(26)
      • 23.0 mm(15)
      • 23.901 mm(81)
      • 24.0 mm(41)
      • 25.0 mm(23)
      • 25.401 mm(32)
      • 26.201 mm(11)
      • 27.701 mm(58)
      • 28.0 mm(4)
      • 30.0 mm(34)
      • 31.0 mm(50)
      • 33.0 mm(1)
      • 34.0 mm(33)
      • 34.926 mm(10)
      • 35.0 mm(7)
      • 36.0 mm(7)
      • 38.0 mm(8)
      • 38.1 mm(15)
      • 40.0 mm(7)
      • 42.0 mm(4)
      • 43.5 mm(18)
      • 44.45 mm(3)
      • 48.0 mm(2)
      • 50.0 mm(4)
      • 50.801 mm(14)
      • 55.0 mm(2)
      • 61.0 mm(2)
      • 67.8 mm(1)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.197 in(4)
      • 0.276 in(31)
      • 0.315 in(27)
      • 0.323 in(3)
      • 0.354 in(8)
      • 0.358 in(1)
      • 0.362 in(2)
      • 0.374 in(1)
      • 0.382 in(101)
      • 0.39 in(15)
      • 0.394 in(24)
      • 0.398 in(4)
      • 0.433 in(17)
      • 0.453 in(2)
      • 0.461 in(3)
      • 0.465 in(1)
      • 0.473 in(48)
      • 0.477 in(3)
      • 0.48 in(6)
      • 0.484 in(2)
      • 0.492 in(2)
      • 0.5 in(103)
      • 0.512 in(42)
      • 0.52 in(11)
      • 0.528 in(2)
      • 0.559 in(1)
      • 0.583 in(27)
      • 0.587 in(7)
      • 0.591 in(89)
      • 0.595 in(2)
      • 0.622 in(10)
      • 0.63 in(62)
      • 0.669 in(6)
      • 0.681 in(11)
      • 0.689 in(2)
      • 0.69 in(68)
      • 0.705 in(1)
      • 0.709 in(44)
      • 0.736 in(15)
      • 0.74 in(1)
      • 0.744 in(7)
      • 0.748 in(22)
      • 0.75 in(10)
      • 0.752 in(52)
      • 0.787 in(18)
      • 0.828 in(39)
      • 0.866 in(10)
      • 0.878 in(11)
      • 0.882 in(26)
      • 0.906 in(15)
      • 0.942 in(81)
      • 0.946 in(41)
      • 0.984 in(23)
      • 1.0 in(32)
      • 1.032 in(11)
      • 1.091 in(58)
      • 1.102 in(4)
      • 1.181 in(34)
      • 1.22 in(50)
      • 1.299 in(1)
      • 1.339 in(33)
      • 1.375 in(10)
      • 1.379 in(7)
      • 1.417 in(7)
      • 1.496 in(8)
      • 1.5 in(15)
      • 1.575 in(7)
      • 1.655 in(4)
      • 1.713 in(18)
      • 1.75 in(3)
      • 1.891 in(2)
      • 1.969 in(4)
      • 2.0 in(14)
      • 2.165 in(2)
      • 2.402 in(2)
      • 2.669 in(1)
      Cutting Length MinkomuCutting Length Max
      Type of Thread
      Type of Thread
      • G (20)
      • M (554)
      • NPT (25)
      • NPTF (14)
      • UN (8)
      • UNC (514)
      • UNF (336)
      • UNJ (20)
      Thread Size
      Thread Size
      • 1 - 11 (1)
      • 1 - 11 1/2 (3)
      • 1 - 12 (11)
      • 1 - 8 (13)
      • 1 1/2 - 12 (3)
      • 1 1/2 - 6 (4)
      • 1 1/2 - 8 (2)
      • 1 1/4 - 12 (2)
      • 1 1/4 - 7 (5)
      • 1 1/4 - 8 (2)
      • 1 1/8 - 12 (5)
      • 1 1/8 - 7 (5)
      • 1 1/8 - 8 (2)
      • 1 3/4 - 5 (2)
      • 1 3/8 - 12 (4)
      • 1 3/8 - 6 (3)
      • 1 3/8 - 8 (2)
      • 1/16 - 27 (3)
      • 1/2 - 13 (44)
      • 1/2 - 14 (8)
      • 1/2 - 20 (30)
      • 1/4 - 18 (8)
      • 1/4 - 19 (4)
      • 1/4 - 20 (41)
      • 1/4 - 28 (42)
      • 1/8 - 27 (11)
      • 1/8 - 28 (4)
      • 10 - 24 (41)
      • 10 - 32 (56)
      • 12 - 24 (7)
      • 12 - 28 (7)
      • 2 - 4 1/2 (3)
      • 2 - 56 (9)
      • 3 - 48 (5)
      • 3/4 - 10 (25)
      • 3/4 - 14 (8)
      • 3/4 - 16 (22)
      • 3/8 - 16 (38)
      • 3/8 - 18 (4)
      • 3/8 - 19 (4)
      • 3/8 - 24 (33)
      • 4 - 40 (37)
      • 4 - 48 (4)
      • 5 - 40 (8)
      • 5/16 - 18 (38)
      • 5/16 - 24 (34)
      • 5/8 - 11 (32)
      • 5/8 - 14 (1)
      • 5/8 - 18 (22)
      • 6 - 32 (49)
      • 6 - 40 (11)
      • 7/16 - 14 (28)
      • 7/16 - 20 (29)
      • 7/8 - 14 (13)
      • 7/8 - 9 (17)
      • 8 - 32 (51)
      • 8 - 36 (6)
      • 9/16 - 12 (14)
      • 9/16 - 18 (17)
      • M10 X 0,75 (3)
      • M10 X 1 (13)
      • M10 X 1,25 (14)
      • M10 X 1,5 (34)
      • M11 X 1 (1)
      • M12 X 1 (5)
      • M12 X 1,25 (13)
      • M12 X 1,5 (14)
      • M12 X 1,75 (31)
      • M14 X 1 (3)
      • M14 X 1,25 (2)
      • M14 X 1,5 (11)
      • M14 X 2 (17)
      • M16 X 1 (2)
      • M16 X 1,5 (14)
      • M16 X 2 (23)
      • M18 X 1 (1)
      • M18 X 1,5 (9)
      • M18 X 2 (2)
      • M18 X 2,5 (10)
      • M2 X 0,4 (10)
      • M2,2 X 0,45 (2)
      • M2,5 X 0,45 (7)
      • M20 X 1 (1)
      • M20 X 1,5 (10)
      • M20 X 2 (2)
      • M20 X 2,5 (15)
      • M22 X 1,5 (6)
      • M22 X 2 (1)
      • M22 X 2,5 (5)
      • M24 X 1,5 (4)
      • M24 X 2 (3)
      • M24 X 3 (9)
      • M27 X 1,5 (4)
      • M27 X 3 (6)
      • M3 X 0,5 (29)
      • M3,5 X 0,6 (9)
      • M30 X 1,5 (4)
      • M30 X 2 (2)
      • M30 X 3,5 (7)
      • M33 X 3,5 (3)
      • M36 X 4 (4)
      • M39 X 4 (1)
      • M4 X 0,5 (2)
      • M4 X 0,7 (33)
      • M42 X 4,5 (2)
      • M45 X 5 (1)
      • M48 X 5 (2)
      • M5 X 0,5 (2)
      • M5 X 0,8 (37)
      • M52 X 5 (1)
      • M6 X 0,75 (4)
      • M6 X 1 (38)
      • M7 X 0,75 (1)
      • M7 X 1 (8)
      • M8 X 0,75 (4)
      • M8 X 1 (14)
      • M8 X 1,25 (39)
      Thread Tolerance Class ANSI
      Thread Tolerance Class ANSI
      • 2B (225)
      • 3B (20)
      Thread Tolerance Class ISO
      Thread Tolerance Class ISO
      • 6G-I (12)
      • 6H-I (322)
      Tap PD Class
      Tap PD Class
      • 6G (5)
      • D11 (35)
      • D3 (12)
      • D4 (35)
      • D5 (51)
      • D6 (50)
      • D7 (29)
      • D8 (5)
      • D9 (3)
      • H11 (35)
      • H2 (66)
      • H3 (242)
      • H4 (46)
      • H5 (153)
      • H6 (35)
      • H7 (56)
      • NPT (3)
      Tap Tolerance Class
      Tap Tolerance Class
      • ISO 2 (288)
      • ISO 3 (12)
      Connection Style
      Connection Style
      • Cylindrical with Drive Square (1490)
      • Straight-Cylindrical (1)
      Number of Flutes
      Number of Flutes
      • 2 (236)
      • 3 (997)
      • 4 (235)
      • 5 (23)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.75 in(5)
      • 1.756 in(4)
      • 1.772 in(12)
      • 1.815 in(2)
      • 1.819 in(3)
      • 1.879 in(17)
      • 1.883 in(13)
      • 1.937 in(1)
      • 1.941 in(16)
      • 1.945 in(6)
      • 1.969 in(9)
      • 1.988 in(21)
      • 1.992 in(11)
      • 2.0 in(20)
      • 2.114 in(2)
      • 2.118 in(40)
      • 2.125 in(12)
      • 2.126 in(19)
      • 2.13 in(2)
      • 2.205 in(33)
      • 2.213 in(6)
      • 2.362 in(22)
      • 2.366 in(1)
      • 2.37 in(27)
      • 2.374 in(14)
      • 2.378 in(28)
      • 2.382 in(5)
      • 2.43 in(6)
      • 2.437 in(7)
      • 2.48 in(29)
      • 2.488 in(10)
      • 2.496 in(20)
      • 2.5 in(40)
      • 2.563 in(4)
      • 2.705 in(15)
      • 2.709 in(11)
      • 2.713 in(6)
      • 2.717 in(17)
      • 2.721 in(25)
      • 2.724 in(4)
      • 2.744 in(2)
      • 2.748 in(3)
      • 2.757 in(28)
      • 2.761 in(3)
      • 2.765 in(6)
      • 2.769 in(2)
      • 2.91 in(2)
      • 2.914 in(6)
      • 2.918 in(8)
      • 2.922 in(2)
      • 2.926 in(17)
      • 2.934 in(1)
      • 2.938 in(27)
      • 2.942 in(13)
      • 3.125 in(5)
      • 3.142 in(6)
      • 3.15 in(54)
      • 3.161 in(37)
      • 3.25 in(5)
      • 3.378 in(12)
      • 3.382 in(68)
      • 3.535 in(4)
      • 3.539 in(3)
      • 3.543 in(61)
      • 3.547 in(2)
      • 3.591 in(32)
      • 3.75 in(3)
      • 3.811 in(53)
      • 3.926 in(4)
      • 3.934 in(1)
      • 3.938 in(111)
      • 4.031 in(8)
      • 4.252 in(30)
      • 4.331 in(95)
      • 4.469 in(10)
      • 4.689 in(23)
      • 4.909 in(5)
      • 4.921 in(33)
      • 5.13 in(18)
      • 5.441 in(13)
      • 5.513 in(43)
      • 5.748 in(7)
      • 5.906 in(6)
      • 6.0 in(9)
      • 6.059 in(6)
      • 6.299 in(20)
      • 6.383 in(8)
      • 6.694 in(2)
      • 7.0 in(2)
      • 7.087 in(11)
      • 7.63 in(1)
      • 7.875 in(9)
      • 8.661 in(1)
      • 9.843 in(5)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 44.45 mm(5)
      • 44.6 mm(4)
      • 45.0 mm(12)
      • 46.1 mm(2)
      • 46.2 mm(3)
      • 47.7 mm(17)
      • 47.801 mm(13)
      • 49.2 mm(1)
      • 49.301 mm(16)
      • 49.401 mm(6)
      • 50.0 mm(9)
      • 50.5 mm(21)
      • 50.6 mm(11)
      • 50.801 mm(20)
      • 53.7 mm(2)
      • 53.801 mm(40)
      • 53.975 mm(12)
      • 54.0 mm(19)
      • 54.1 mm(2)
      • 56.0 mm(33)
      • 56.2 mm(6)
      • 60.0 mm(22)
      • 60.1 mm(1)
      • 60.2 mm(27)
      • 60.301 mm(14)
      • 60.401 mm(28)
      • 60.5 mm(5)
      • 61.7 mm(6)
      • 61.901 mm(7)
      • 63.0 mm(29)
      • 63.2 mm(10)
      • 63.401 mm(20)
      • 63.5 mm(40)
      • 65.101 mm(4)
      • 68.7 mm(15)
      • 68.8 mm(11)
      • 68.9 mm(6)
      • 69.0 mm(17)
      • 69.101 mm(25)
      • 69.2 mm(4)
      • 69.7 mm(2)
      • 69.8 mm(3)
      • 70.0 mm(28)
      • 70.101 mm(3)
      • 70.2 mm(6)
      • 70.3 mm(2)
      • 73.9 mm(2)
      • 74.0 mm(6)
      • 74.101 mm(8)
      • 74.2 mm(2)
      • 74.3 mm(17)
      • 74.5 mm(1)
      • 74.601 mm(27)
      • 74.7 mm(13)
      • 79.375 mm(5)
      • 79.801 mm(6)
      • 80.0 mm(54)
      • 80.301 mm(37)
      • 82.551 mm(5)
      • 85.801 mm(12)
      • 85.9 mm(68)
      • 89.801 mm(4)
      • 89.9 mm(3)
      • 90.0 mm(61)
      • 90.101 mm(2)
      • 91.2 mm(32)
      • 95.25 mm(3)
      • 96.801 mm(53)
      • 99.7 mm(4)
      • 99.9 mm(1)
      • 100.0 mm(111)
      • 102.4 mm(8)
      • 108.0 mm(30)
      • 110.0 mm(95)
      • 113.5 mm(10)
      • 119.101 mm(23)
      • 124.7 mm(5)
      • 125.0 mm(33)
      • 130.3 mm(18)
      • 138.201 mm(13)
      • 140.0 mm(43)
      • 146.0 mm(7)
      • 150.0 mm(6)
      • 152.4 mm(9)
      • 153.9 mm(6)
      • 160.0 mm(20)
      • 162.101 mm(8)
      • 170.0 mm(2)
      • 177.8 mm(2)
      • 180.0 mm(11)
      • 193.8 mm(1)
      • 200.0 mm(9)
      • 220.0 mm(1)
      • 250.0 mm(5)
      Over All Length [L] MinkomuOver All Length [L] Max
      application
      Coating
      Coating
      • Oxide (596)
      • TiCN (289)
      • TiN (150)
      • Uncoated (8)
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • WP42EG (339)
      • WP49EG (841)
      • WU40EG (73)
      • WU41EG (238)
      Tap Standard
      Tap Standard
      • ANSI (880)
      • DIN 371 (186)
      • DIN 374 (118)
      • DIN 376 (174)
      • DIN-ANSI (101)
      Tap Type
      Tap Type
      • 10 (13)
      • 11 (572)
      • 13 (15)
      • 8 (891)
      frontEnd
      Thread TPI
      Thread TPI
      • 4.5 (3)
      • 5.0 (2)
      • 6.0 (7)
      • 7.0 (10)
      • 8.0 (21)
      • 9.0 (17)
      • 10.0 (25)
      • 11.0 (33)
      • 11.5 (3)
      • 12.0 (39)
      • 13.0 (44)
      • 14.0 (58)
      • 16.0 (60)
      • 18.0 (89)
      • 19.0 (8)
      • 20.0 (100)
      • 24.0 (115)
      • 27.0 (14)
      • 28.0 (53)
      • 32.0 (156)
      • 36.0 (6)
      • 40.0 (56)
      • 48.0 (9)
      • 56.0 (9)
      Thread TPI MinkomuThread TPI Max
      Thread Pitch
      Thread Pitch
      • 0.4 mm(10)
      • 0.45 mm(4)
      • 0.5 mm(33)
      • 0.601 mm(7)
      • 0.701 mm(33)
      • 0.75 mm(12)
      • 0.8 mm(37)
      • 1.0 mm(86)
      • 1.25 mm(68)
      • 1.5 mm(110)
      • 1.75 mm(31)
      • 2.0 mm(50)
      • 2.2 mm(1)
      • 2.5 mm(34)
      • 3.0 mm(15)
      • 3.5 mm(12)
      • 4.0 mm(5)
      • 4.5 mm(2)
      • 5.0 mm(4)
      Thread Pitch MinkomuThread Pitch Max
      Thread Pitch
      Thread Pitch
      • 0.016 in(10)
      • 0.019 in(4)
      • 0.02 in(33)
      • 0.024 in(7)
      • 0.028 in(33)
      • 0.03 in(12)
      • 0.031 in(37)
      • 0.039 in(86)
      • 0.049 in(68)
      • 0.06 in(110)
      • 0.069 in(31)
      • 0.079 in(50)
      • 0.088 in(1)
      • 0.098 in(34)
      • 0.119 in(15)
      • 0.138 in(12)
      • 0.157 in(5)
      • 0.177 in(2)
      • 0.197 in(4)
      Thread Pitch MinkomuThread Pitch Max
      Chamfer Form
      Chamfer Form
      • FB (167)
      • PC (615)
      • PP (49)
      • SB (650)
      • TC (10)
      backEnd
      Back-End Diameter
      Back-End Diameter
      • 2.2 mm(1)
      • 2.801 mm(23)
      • 3.5 mm(27)
      • 3.575 mm(128)
      • 4.0 mm(12)
      • 4.275 mm(68)
      • 4.5 mm(32)
      • 4.926 mm(100)
      • 5.5 mm(1)
      • 5.601 mm(13)
      • 6.0 mm(60)
      • 6.476 mm(85)
      • 7.0 mm(42)
      • 7.95 mm(8)
      • 8.0 mm(43)
      • 8.076 mm(90)
      • 8.201 mm(43)
      • 9.0 mm(43)
      • 9.326 mm(94)
      • 9.675 mm(90)
      • 10.0 mm(26)
      • 10.9 mm(34)
      • 11.0 mm(35)
      • 11.125 mm(4)
      • 12.0 mm(31)
      • 12.201 mm(66)
      • 13.775 mm(10)
      • 14.0 mm(16)
      • 14.3 mm(7)
      • 14.976 mm(36)
      • 16.0 mm(26)
      • 16.55 mm(12)
      • 17.475 mm(5)
      • 17.7 mm(24)
      • 17.776 mm(4)
      • 18.0 mm(39)
      • 19.3 mm(3)
      • 19.326 mm(2)
      • 20.0 mm(11)
      • 20.326 mm(15)
      • 22.0 mm(12)
      • 22.75 mm(12)
      • 23.026 mm(4)
      • 23.201 mm(1)
      • 25.0 mm(4)
      • 25.901 mm(1)
      • 25.925 mm(11)
      • 28.0 mm(8)
      • 28.151 mm(6)
      • 28.576 mm(3)
      • 31.3 mm(6)
      • 31.326 mm(1)
      • 31.951 mm(1)
      • 32.0 mm(3)
      • 36.0 mm(3)
      • 36.275 mm(1)
      • 36.325 mm(1)
      • 40.0 mm(3)
      • 41.725 mm(1)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.088 in(1)
      • 0.11 in(23)
      • 0.138 in(27)
      • 0.142 in(128)
      • 0.157 in(12)
      • 0.168 in(68)
      • 0.177 in(32)
      • 0.194 in(100)
      • 0.217 in(1)
      • 0.221 in(13)
      • 0.237 in(60)
      • 0.255 in(85)
      • 0.276 in(42)
      • 0.313 in(8)
      • 0.315 in(43)
      • 0.318 in(90)
      • 0.323 in(43)
      • 0.354 in(43)
      • 0.367 in(94)
      • 0.381 in(90)
      • 0.394 in(26)
      • 0.429 in(34)
      • 0.433 in(35)
      • 0.438 in(4)
      • 0.473 in(31)
      • 0.48 in(66)
      • 0.542 in(10)
      • 0.551 in(16)
      • 0.564 in(7)
      • 0.59 in(36)
      • 0.63 in(26)
      • 0.652 in(12)
      • 0.689 in(5)
      • 0.698 in(24)
      • 0.701 in(4)
      • 0.709 in(39)
      • 0.76 in(3)
      • 0.761 in(2)
      • 0.787 in(11)
      • 0.8 in(15)
      • 0.866 in(12)
      • 0.896 in(12)
      • 0.907 in(4)
      • 0.913 in(1)
      • 0.984 in(4)
      • 1.02 in(1)
      • 1.022 in(11)
      • 1.102 in(8)
      • 1.108 in(6)
      • 1.125 in(3)
      • 1.232 in(6)
      • 1.233 in(1)
      • 1.258 in(1)
      • 1.26 in(3)
      • 1.417 in(3)
      • 1.428 in(1)
      • 1.43 in(1)
      • 1.575 in(3)
      • 1.643 in(1)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • DIN Length ANSI Shank
      (29)

      VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • DIN Length ANSI Shank

      VT-SPO • Tvar náběhu B • Metrické • DIN délka ANSI stopka
      (20)

      VT-SPO • Tvar náběhu B • Metrické • DIN délka ANSI stopka

      VT-SPO • Tvar B s kuželovým náběhem • Pohybové šrouby a dělené rozměry • DIN 371 a 376
      (57)

      VT-SPO • Tvar B s kuželovým náběhem • Pohybové šrouby a dělené rozměry • DIN 371 a 376

      VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • 6" Length • ANSI
      (9)

      VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • 6" Length • ANSI

      VT-SFT • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • DIN Length ANSI Shank
      (25)

      VT-SFT • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • DIN Length ANSI Shank

      VT-SPO • Tvar B s kuželovým náběhem • Metrické podle • DIN 371, 374 a 376
      (103)

      VT-SPO • Tvar B s kuželovým náběhem • Metrické podle • DIN 371, 374 a 376

      VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • ANSI
      (248)

      VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • ANSI

      VT-SPO • Tvar B s kuželovým náběhem • Metrické • ANSI
      (100)

      VT-SPO • Tvar B s kuželovým náběhem • Metrické • ANSI

      VT-SFT • Form E Bottoming Chamfer • Machine Screw and Fractional • ANSI
      (178)

      VT-SFT • Form E Bottoming Chamfer • Machine Screw and Fractional • ANSI

      VT- SFT • Tvar E s dořezávacím náběhem • Metrické • ANSI
      (52)

      VT- SFT • Tvar E s dořezávacím náběhem • Metrické • ANSI

      VT-SFT TC • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • ANSI • Tension/Compression Holders
      (156)

      VT-SFT TC • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • ANSI • Tension/Compression Holders

      VT- SFT SFT • Středně dlouhý náběh tvar C • Metrické • ANSI • Flexibilní tlakové držáky nástrojů
      (51)

      VT- SFT SFT • Středně dlouhý náběh tvar C • Metrické • ANSI • Flexibilní tlakové držáky nástrojů

      VT-STR • NPT • Standardní náběh • Trubkové závitníky
      (5)

      VT-STR • NPT • Standardní náběh • Trubkové závitníky

      VTSPO • (G) Whitworth Pipe Thread • DIN EN ISO 228 • Form B Plug Chamfer
      (10)

      VTSPO • (G) Whitworth Pipe Thread • DIN EN ISO 228 • Form B Plug Chamfer

      VTSFT • (G) Whitworth Pipe Thread • DIN EN ISO 228 • Form C Semi-Bottoming Chamfer
      (10)

      VTSFT • (G) Whitworth Pipe Thread • DIN EN ISO 228 • Form C Semi-Bottoming Chamfer

      VT-STR • Form C Semi-Bottoming Chamfer • NPT and NPTF
      (3)

      VT-STR • Form C Semi-Bottoming Chamfer • NPT and NPTF

      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number Katalogové číslo ISO Karbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk