100018357
Spiral Circular
Helical Milling
Ramping: Blank
Shank - Screw-On
Counter Boring
Pocketing
Plunge Milling
Inclined Square End MillDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 6596723 |
| ISO katalogové ID | VXF032Z03M16XD12 |
| ANSI katalogové ID | VXF032Z03M16XD12 |
| [D1MAX] Maximum Cutting Diameter | 32 mm |
| [D1MAX] Maximum Cutting Diameter | 1.259 in |
| [D1] Effective Cutting Diameter | 13.875 mm |
| [D1] Effective Cutting Diameter | .5463 in |
| [D] Adapter / Shank / Bore Diameter | 29 mm |
| [D] Adapter / Shank / Bore Diameter | 1.141 in |
| [DPM] Pilot Diameter Machine Side | 16.988 mm |
| [DPM] Pilot Diameter Machine Side | .6688 in |
| [G3X] Connection Thread Size External | M16 |
| [L2] Head Length | 43 mm |
| [L2] Head Length | 1.692 in |
| [WF] Width of Flat | 23.95 mm |
| [WF] Width of Flat | .9429 in |
| [AP1MAX] 1st Maximum Cutting Depth | 2.5 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .0985 in |
| Number of Inserts | 3 |
| Maximum Ramping Angle | 1.8 |
| Max RPM | 31500 |
| Coolant Supply | Y |
| Weight Kilograms | 0.19 |
100018357Spiral CircularHelical MillingRamping: BlankShank - Screw-OnCounter BoringPocketingPlunge MillingInclined Square End MillVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| P3–P4 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| P5–P6 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| M1–M2 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| M3 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S1–S2 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S3 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S4 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,43 | 1,39 | 2,20 | 0,31 | 0,99 | 1,56 | 0,23 | 0,74 | 1,15 | 0,20 | 0,64 | 1,00 | 0,19 | 0,59 | 0,92 | .E..MM |
| .S..MH | 0,62 | 1,57 | 2,41 | 0,45 | 1,12 | 1,70 | 0,33 | 0,84 | 1,26 | 0,29 | 0,73 | 1,10 | 0,27 | 0,67 | 1,00 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,49 | 1,59 | 2,52 | 0,35 | 1,13 | 1,78 | 0,26 | 0,84 | 1,31 | 0,23 | 0,73 | 1,14 | 0,21 | 0,67 | 1,04 | .E..MM |
| .S..MH | 0,70 | 1,80 | 2,76 | 0,51 | 1,28 | 1,94 | 0,38 | 0,95 | 1,44 | 0,33 | 0,83 | 1,25 | 0,30 | 0,76 | 1,14 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,36 | 1,15 | 1,81 | 0,26 | 0,83 | 1,29 | 0,19 | 0,62 | 0,96 | 0,17 | 0,54 | 0,83 | 0,15 | 0,49 | 0,76 | .E..MM |
| .S..MH | 0,51 | 1,30 | 1,99 | 0,37 | 0,93 | 1,41 | 0,28 | 0,70 | 1,05 | 0,24 | 0,61 | 0,91 | 0,22 | 0,55 | 0,83 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .018 | .051 | .094 | .013 | .035 | .059 | .009 | .025 | .042 | .008 | .022 | .037 | .007 | .020 | .033 | .E..MM |
| .S..MH | .032 | .070 | .118 | .023 | .046 | .071 | .017 | .033 | .050 | .014 | .029 | .043 | .013 | .026 | .039 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .020 | .058 | .109 | .014 | .039 | .067 | .010 | .028 | .047 | .009 | .025 | .041 | .008 | .022 | .037 | .E..MM |
| .S..MH | .036 | .080 | .141 | .025 | .052 | .080 | .019 | .037 | .056 | .016 | .032 | .048 | .015 | .029 | .043 | .S..MH |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .015 | .043 | .076 | .011 | .029 | .050 | .008 | .022 | .036 | .007 | .019 | .031 | .006 | .017 | .028 | .E..MM |
| .S..MH | .027 | .058 | .093 | .019 | .039 | .059 | .014 | .028 | .042 | .012 | .024 | .036 | .011 | .022 | .033 | .S..MH |
| Material Group | WP25PM | WP40PM | WS40PM | |||||||
| P | 1 | 395 | 340 | 325 | 355 | 310 | 295 | – | – | – |
| 2 | 330 | 290 | 240 | 300 | 260 | 215 | – | – | – | |
| 3 | 305 | 260 | 210 | 275 | 235 | 190 | – | – | – | |
| 4 | 270 | 220 | 180 | 245 | 205 | 160 | – | – | – | |
| 5 | 220 | 205 | 180 | 205 | 185 | 160 | 205 | 175 | 145 | |
| 6 | 200 | 150 | 120 | 180 | 140 | 110 | 180 | 130 | 95 | |
| M | 1 | 245 | 215 | 200 | 235 | 205 | 185 | 250 | 205 | 170 |
| 2 | 220 | 190 | 155 | 210 | 180 | 150 | 215 | 175 | 145 | |
| 3 | 170 | 145 | 115 | 155 | 140 | 110 | 175 | 130 | 100 | |
| S | 1 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 |
| 2 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 | |
| 3 | 60 | 50 | 30 | 60 | 50 | 35 | 60 | 50 | 30 | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 70 | 60 | 35 | |
| Material Group | WP25PM | WP40PM | WS40PM | |||||||
| P | 1 | 1295 | 1115 | 1065 | 1165 | 1015 | 970 | – | – | – |
| 2 | 1085 | 950 | 785 | 985 | 855 | 705 | – | – | – | |
| 3 | 1000 | 855 | 690 | 900 | 770 | 625 | – | – | – | |
| 4 | 885 | 720 | 590 | 805 | 675 | 525 | – | – | – | |
| 5 | 720 | 675 | 590 | 675 | 605 | 525 | 675 | 575 | 475 | |
| 6 | 655 | 490 | 395 | 590 | 460 | 360 | 590 | 425 | 310 | |
| M | 1 | 805 | 705 | 655 | 770 | 675 | 605 | 820 | 675 | 560 |
| 2 | 720 | 625 | 510 | 690 | 590 | 490 | 705 | 575 | 475 | |
| 3 | 560 | 475 | 375 | 510 | 460 | 360 | 575 | 425 | 330 | |
| S | 1 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 |
| 2 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 | |
| 3 | 195 | 165 | 100 | 195 | 165 | 115 | 195 | 165 | 100 | |
| 4 | 280 | 195 | 130 | 260 | 195 | 130 | 230 | 195 | 115 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?