Produkt podobný k:
TT HPV HT-CV Form B/AD
Shrink Fit Toolholders High Torque (HT)
Objednací číslo3618026
ISO katalogové IDCV50HPVTTHT100400ANSI katalogové IDCV50HPVTTHT100400
- Axial Adjustment - End
- Shank - 1"–8 unc Drawbar
- Accuracy - 3μm or Less
- Drilling - Through Coolant
- Shank - Cylindrical Plain ≤h6
- Shank - Cylindrical Weldon® ≤h6
- Shank - Cylindrical Whistle Notch ≤h6
- Shank - SK CAT(CV) ANSI B5.50
- Balance - G 6.3@15,000 min -1
- Shank - SK CAT(CV) ANSI B5.50 1"–8 unc Drawbar
- Shank - 5/8"–11 unc Drawbar
- Balance - G 6.3@15,000 min-1
- Shank - SK CAT(CV) ANSI B5.50 5/8"–11 unc Drawbar
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Přehled
- Řezné podmínky
- Stahování
- Kompatibilní díly strana obrobku
- Náhradní díly
- Posouzení
- Otázky A Odpovědi
Objednací číslo | 3618026 |
ISO katalogové ID | CV50HPVTTHT100400 |
ANSI katalogové ID | CV50HPVTTHT100400 |
[D1] Adapter / Shank / Bore Diameter | 25.4 mm |
[D1] Adapter / Shank / Bore Diameter | 1 in |
[D2] Body Diameter 1 Workpiece Side | 44 mm |
[D2] Body Diameter 1 Workpiece Side | 1.732 in |
[D21] Body Diameter 2 Workpiece Side | 52.9 mm |
[D21] Body Diameter 2 Workpiece Side | 2.083 in |
[L1] Gage Length | 101.6 mm |
[L1] Gage Length | 4 in |
[L2] Usable Length | 66.675 mm |
[L2] Usable Length | 2.625 in |
[L9] Clamping Length | 47 mm |
[L9] Clamping Hole Length | 1.85 in |
[V] Adjustment Range | 10 mm |
[V] Adjustment Range | .3937 in |
Stop Screw ID Drive Size | 8 mm |
Weight Kilograms | 3.67 |
Použití
- Axial Adjustment - End
- Shank - 1"–8 unc Drawbar
- Accuracy - 3μm or Less
- Drilling - Through Coolant
- Shank - Cylindrical Plain ≤h6
- Shank - Cylindrical Weldon® ≤h6
- Shank - Cylindrical Whistle Notch ≤h6
- Shank - SK CAT(CV) ANSI B5.50
- Balance - G 6.3@15,000 min -1
- Shank - SK CAT(CV) ANSI B5.50 1"–8 unc Drawbar
- Shank - 5/8"–11 unc Drawbar
- Balance - G 6.3@15,000 min-1
- Shank - SK CAT(CV) ANSI B5.50 5/8"–11 unc Drawbar
Vlastnosti a výhody
- 30–50% higher clamping torque compared to GP line.
- Balanceable — fine tune with optional M6 set screws.
- Suitable for carbide only, designated by groove in front face (requirements below).
- 10 kW power or greater Shrink Fit device must be used.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use