Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Corner Style: Square End
Shank - Cylindrical Plain
Helix Angle: 30°
38570Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5872850 |
| ISO katalogové ID | I2S0156T056L |
| ANSI katalogové ID | I2S0156T056L |
| Grade | TIALN |
| Adapter Style Machine Side | Straight-Cylindrical |
| [Z] Number of Flutes | 2 |
| [D1] Effective Cutting Diameter | 3.969 mm |
| [D1] Effective Cutting Diameter | .1562 in |
| [D] Adapter / Shank / Bore Diameter | 4.762 mm |
| [D] Adapter / Shank / Bore Diameter | .1875 in |
| [AP1MAX] 1st Maximum Cutting Depth | 14.288 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .5625 in |
| [L] Overall Length | 50.8 mm |
| [L] Overall Length | 2 in |
Ramping: BlankSlotting: Square EndSide Milling/Shoulder Milling: Square EndCorner Style: Square EndShank - Cylindrical PlainHelix Angle: 30°38570Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
 |  |  | ||||||||||||||||||||
| Side Milling (A) and Slotting (B) | TiAlN | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||||||
| A | B | Cutting Speed | D1 | |||||||||||||||||||
| frac. | 1/64 | 1/32 | 1/16 | 5/64 | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||||
| Material | ap | ae | ap | Min | Max | dec. | .0156 | .0313 | .0625 | .0781 | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | ||
| P | 0 | Ap1 max | 0.1 x D | 0.5 x D | 490 | – | 660 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 1 | Ap1 max | 0.1 x D | 0.5 x D | 490 | – | 660 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 2 | Ap1 max | 0.1 x D | 0.5 x D | 460 | – | 620 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 3 | Ap1 max | 0.1 x D | 0.5 x D | 390 | – | 520 | IPT | .0001 | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
| 4 | Ap1 max | 0.1 x D | 0.5 x D | 300 | – | 490 | IPT | .0001 | .0002 | .0003 | .0004 | .0005 | .0007 | .0010 | .0014 | .0017 | .0020 | .0026 | .0030 | .0034 | .0039 | |
| M | 1 | Ap1 max | 0.1 x D | 0.5 x D | 300 | – | 380 | IPT | .0001 | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
| 2 | Ap1 max | 0.1 x D | 0.5 x D | 200 | – | 260 | IPT | .0001 | .0001 | .0003 | .0004 | .0004 | .0006 | .0009 | .0012 | .0016 | .0018 | .0023 | .0027 | .0031 | .0036 | |
| K | 1 | Ap1 max | 0.1 x D | 0.5 x D | 390 | – | 490 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 2 | Ap1 max | 0.1 x D | 0.5 x D | 360 | – | 460 | IPT | .0001 | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
| | | ||||||||||||||||||||
| Side Milling (A) and Slotting (B) | Uncoated | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||||||
| A | B | Cutting Speed | D1 | |||||||||||||||||||
| frac. | 1/64 | 1/32 | 1/16 | 5/64 | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||||
| Material | ap | ae | ap | Min | Max | dec. | .0156 | .0313 | .0625 | .0781 | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | ||
| P | 0 | Ap1 max | 0.1 x D | 0.5 x D | 390 | – | 520 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 1 | 1.25xD | 0.1 x D | 0.5 x D | 390 | – | 520 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 2 | 1.25xD | 0.1 x D | 0.5 x D | 370 | – | 500 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
|  | ||||||||||||||||||
| Side Milling (A) | TiAlN | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||||||
| A | Cutting Speed | D1 | |||||||||||||||||
| frac. | 1/16 | 5/64 | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||||||
| Material | ap | ae | Min | Max | dec. | .0625 | .0781 | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | ||
| P | 0 | Ap1 max | 0.1xD | 490 | – | 660 | IPT | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 1 | Ap1 max | 0.1xD | 490 | – | 660 | IPT | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 2 | Ap1 max | 0.1xD | 460 | – | 620 | IPT | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 3 | Ap1 max | 0.1xD | 390 | – | 520 | IPT | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
| 4 | Ap1 max | 0.1xD | 300 | – | 490 | IPT | .0003 | .0004 | .0005 | .0007 | .0010 | .0014 | .0017 | .0020 | .0026 | .0030 | .0034 | .0039 | |
| M | 1 | Ap1 max | 0.1xD | 300 | – | 380 | IPT | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
| 2 | Ap1 max | 0.1xD | 200 | – | 260 | IPT | .0003 | .0004 | .0004 | .0006 | .0009 | .0012 | .0016 | .0018 | .0023 | .0027 | .0031 | .0036 | |
| K | 1 | Ap1 max | 0.1xD | 390 | – | 490 | IPT | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 2 | Ap1 max | 0.1xD | 360 | – | 460 | IPT | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
| | ||||||||||||||||||
| Side Milling (A) | Uncoated | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||||||
| A | Cutting Speed | D1 | |||||||||||||||||
| frac. | 1/16 | 5/64 | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||||||
| Material | ap | ae | Min | Max | dec. | .0625 | .0781 | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | ||
| P | 0 | Ap1 max | 0.1xD | 390 | – | 520 | IPT | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 1 | Ap1 max | 0.1xD | 390 | – | 520 | IPT | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 2 | Ap1 max | 0.1xD | 370 | – | 500 | IPT | .0004 | .0005 | .0007 | .0009 | .0013 | .0018 | .0023 | .0027 | .0034 | .0039 | .0044 | .0049 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?