Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

M370™ Series • IC08 • Medium

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (46)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(46)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(46)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(46)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(46)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(46)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(46)
    • M Stainless Steel (46)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(46)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(46)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(46)
    • K Cast Iron (42)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(42)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(42)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(42)
    • N Non-Ferrous Materials (37)
      • N1
        Wrought Aluminum (37)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(37)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(37)
    • S High-Temp Alloys (44)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
    • H Hardened Materials (38)
      • H1
        Hardened Materials 44-48 HRC(38)
    Select All Star
    • CN (7)
    • DE (24)
    • GB (11)
    • IN (2)
    • SG (12)
    • US (12)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (1)
    • Face MillingFace Milling (35)
    • PocketPocket (35)
    • Pocket HelicalPocket Helical (34)
    • Pocket MillingPocket Milling (35)
    • Pocket Plunge MillingPocket Plunge Milling (35)
    • Profile MillingProfile Milling (35)
    • RampingRamping (35)
    • Shoulder MillingShoulder Milling (34)
    • Shoulder RoughingShoulder Roughing (34)
    • Slot MillingSlot Milling (34)
    • Slot Square EndSlot Square End (1)
    Cutting Diameter
    Cutting Diameter
    • 0.441 in(3)
    • 0.445 in(3)
    • 0.457 in(3)
    • 0.461 in(1)
    • 0.555 in(1)
    • 0.702 in(2)
    • 0.711 in(1)
    • 0.713 in(2)
    • 0.717 in(1)
    • 0.95 in(1)
    • 0.954 in(2)
    • 1.024 in(1)
    • 1.028 in(1)
    • 1.102 in(1)
    • 1.417 in(2)
    • 1.449 in(2)
    • 1.499 in(2)
    • 1.931 in(1)
    • 1.949 in(1)
    • 2.043 in(1)
    • 2.273 in(1)
    • 2.449 in(1)
    • 2.598 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 11.201 mm(3)
    • 11.3 mm(3)
    • 11.601 mm(3)
    • 11.701 mm(1)
    • 14.101 mm(1)
    • 17.8 mm(2)
    • 18.05 mm(1)
    • 18.1 mm(2)
    • 18.2 mm(1)
    • 24.1 mm(1)
    • 24.201 mm(2)
    • 26.0 mm(1)
    • 26.1 mm(1)
    • 28.0 mm(1)
    • 36.0 mm(2)
    • 36.801 mm(2)
    • 38.075 mm(2)
    • 49.051 mm(1)
    • 49.5 mm(1)
    • 51.901 mm(1)
    • 57.7 mm(1)
    • 62.2 mm(1)
    • 66.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 25.0 mm(6)
    • 25.401 mm(4)
    • 28.0 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(4)
    • 38.1 mm(3)
    • 40.0 mm(2)
    • 42.0 mm(1)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 52.0 mm(2)
    • 63.0 mm(1)
    • 63.5 mm(1)
    • 66.0 mm(1)
    • 76.2 mm(2)
    • 80.0 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.984 in(6)
    • 1.0 in(4)
    • 1.102 in(1)
    • 1.25 in(2)
    • 1.26 in(4)
    • 1.5 in(3)
    • 1.575 in(2)
    • 1.655 in(1)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.047 in(2)
    • 2.48 in(1)
    • 2.5 in(1)
    • 2.598 in(1)
    • 3.0 in(2)
    • 3.15 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.25 mm(35)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.049 in(35)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.379 in(3)
    • 1.5 in(7)
    • 1.575 in(14)
    • 1.693 in(2)
    • 1.969 in(9)
    Reach MinkomuReach Max
    Reach
    Reach
    • 35.0 mm(3)
    • 38.1 mm(7)
    • 40.0 mm(14)
    • 43.0 mm(2)
    • 50.0 mm(9)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 12.0 (35)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Socket Head Cap Screw (1)
    • A-Socket Head Cap Screw (14)
    • Screw-On Connection (5)
    • Straight-Cylindrical (15)
    Number of Flutes
    Number of Flutes
    • 2 (5)
    • 3 (10)
    • 4 (6)
    • 5 (5)
    • 6 (5)
    • 7 (3)
    • 8 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(8)
    • 1.969 in(7)
    • 2.244 in(3)
    • 2.657 in(2)
    • 5.906 in(2)
    • 6.0 in(4)
    • 7.686 in(1)
    • 7.875 in(4)
    • 8.0 in(2)
    • 11.811 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(8)
    • 50.0 mm(7)
    • 57.0 mm(3)
    • 67.5 mm(2)
    • 150.0 mm(2)
    • 152.4 mm(4)
    • 195.201 mm(1)
    • 200.0 mm(4)
    • 203.201 mm(2)
    • 300.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TN5515 (35)
    • TN6520 (35)
    • TN6525 (37)
    • TN6540 (37)
    • TN7535 (35)
    • WK15CM (36)
    • WP25PM (37)
    • WP40PM (37)
    • WS30PM (36)
    • WS40PM (37)
    Hand Of Tool
    Hand Of Tool
    • R (35)
    Wiper Insert
    Wiper Insert
    • N (12)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.48 (1)
    • 0.5 (3)
    • 0.62 (1)
    • 0.66 (1)
    • 0.81 (1)
    • 0.83 (3)
    • 0.84 (2)
    • 1.01 (1)
    • 1.09 (2)
    • 1.41 (6)
    • 1.46 (2)
    • 1.5 (3)
    • 1.73 (1)
    • 2.05 (3)
    • 2.09 (5)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • X-TRIGON WO_J 101.5 (37)
    • X-TRIGON WO_J 80 (45)
    Neck Diameter
    Neck Diameter
    • 0.828 in(1)
    • 0.843 in(3)
    • 0.866 in(3)
    • 0.906 in(1)
    • 1.093 in(2)
    • 1.143 in(3)
    • 1.196 in(1)
    • 1.324 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 21.0 mm(1)
    • 21.401 mm(3)
    • 22.0 mm(3)
    • 23.0 mm(1)
    • 27.75 mm(2)
    • 29.0 mm(3)
    • 30.375 mm(1)
    • 33.625 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • X-TRIGON WO_J 101.5 (2)
    • X-TRIGON WO_J 80 (10)
    Insert IC Size
    Insert IC Size
    • 7.801 mm(12)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.307 in(12)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.301 mm(12)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.248 in(12)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • MH (6)
    • MM (6)
    Cutting Tool Material
    Cutting Tool Material
    • H W (12)
    Tolerance Class
    Tolerance Class
    • E (12)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (15)
    • SCREW-ON (5)
    • SHELL MILL (15)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(3)
    • 21.0 mm(3)
    • 22.0 mm(5)
    • 25.0 mm(5)
    • 25.401 mm(5)
    • 27.0 mm(2)
    • 29.0 mm(2)
    • 31.701 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 38.1 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.63 in(2)
    • 0.75 in(3)
    • 0.828 in(3)
    • 0.866 in(5)
    • 0.984 in(5)
    • 1.0 in(5)
    • 1.063 in(2)
    • 1.143 in(2)
    • 1.248 in(1)
    • 1.25 in(2)
    • 1.26 in(3)
    • 1.5 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Těla nástrojů
    (35)

    Těla nástrojů

    Břitové destičky
    (12)

    Břitové destičky

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk