Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

VSM11 Series - Tool Bodies

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (84)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(84)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(84)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(84)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(84)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(84)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(84)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(84)
    • M Stainless Steel (84)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(84)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(84)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(84)
    • K Cast Iron (84)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(84)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(84)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(84)
    • N Non-Ferrous Materials (84)
      • N1
        Wrought Aluminum (84)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(84)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(84)
    • S High-Temp Alloys (84)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(84)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(84)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(84)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(84)
    • H Hardened Materials (84)
      • H1
        Hardened Materials 44-48 HRC(84)
    Select All Star
    • CN (31)
    • DE (39)
    • GB (11)
    • IN (5)
    • SG (19)
    • US (19)
    Applications
    Applications
    • Face MillingFace Milling (74)
    • PocketPocket (73)
    • Pocket HelicalPocket Helical (73)
    • Pocket MillingPocket Milling (73)
    • Profile MillingProfile Milling (11)
    • RampingRamping (73)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (1)
    • Shoulder MillingShoulder Milling (74)
    • Shoulder RoughingShoulder Roughing (73)
    • Shoulder Square EndShoulder Square End (73)
    • Slot MillingSlot Milling (50)
    • Slot Square EndSlot Square End (51)
    Cutting Diameter
    Cutting Diameter
    • 0.473 in(2)
    • 0.5 in(1)
    • 0.625 in(2)
    • 0.63 in(6)
    • 0.709 in(3)
    • 0.75 in(7)
    • 0.787 in(8)
    • 0.866 in(3)
    • 0.984 in(8)
    • 1.0 in(9)
    • 1.181 in(1)
    • 1.25 in(5)
    • 1.26 in(9)
    • 1.5 in(3)
    • 1.575 in(3)
    • 1.969 in(2)
    • 2.0 in(3)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(1)
    • 3.15 in(1)
    • 3.938 in(1)
    • 4.0 in(1)
    • 4.921 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.0 mm(2)
    • 12.701 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(6)
    • 18.0 mm(3)
    • 19.05 mm(7)
    • 20.0 mm(8)
    • 22.0 mm(3)
    • 25.0 mm(8)
    • 25.401 mm(9)
    • 30.0 mm(1)
    • 31.75 mm(5)
    • 32.0 mm(9)
    • 38.1 mm(3)
    • 40.0 mm(3)
    • 50.0 mm(2)
    • 50.801 mm(3)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(1)
    • 125.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 11.326 mm(13)
    • 11.375 mm(3)
    • 11.4 mm(3)
    • 11.451 mm(15)
    • 11.525 mm(28)
    • 11.55 mm(15)
    • 11.576 mm(3)
    • 11.701 mm(3)
    • 51.625 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.446 in(13)
    • 0.448 in(3)
    • 0.449 in(3)
    • 0.451 in(15)
    • 0.454 in(28)
    • 0.455 in(15)
    • 0.456 in(3)
    • 0.461 in(3)
    • 2.032 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.8 in(1)
    • 0.828 in(4)
    • 0.845 in(1)
    • 0.984 in(4)
    • 1.0 in(1)
    • 1.1 in(3)
    • 1.102 in(1)
    • 1.17 in(2)
    • 1.181 in(5)
    • 1.22 in(13)
    • 1.25 in(3)
    • 1.26 in(1)
    • 1.282 in(1)
    • 1.299 in(2)
    • 1.5 in(2)
    • 1.536 in(3)
    • 1.575 in(15)
    • 1.6 in(1)
    • 1.61 in(2)
    • 1.614 in(5)
    • 1.72 in(2)
    • 1.75 in(1)
    • 1.969 in(4)
    • 2.0 in(1)
    • 2.1 in(2)
    • 2.48 in(1)
    • 2.511 in(1)
    • 2.559 in(1)
    • 3.0 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 20.326 mm(1)
    • 21.0 mm(4)
    • 21.451 mm(1)
    • 25.0 mm(4)
    • 25.401 mm(1)
    • 27.951 mm(3)
    • 28.0 mm(1)
    • 29.725 mm(2)
    • 30.0 mm(5)
    • 31.0 mm(13)
    • 31.75 mm(3)
    • 32.0 mm(1)
    • 32.551 mm(1)
    • 33.0 mm(2)
    • 38.1 mm(2)
    • 39.0 mm(3)
    • 40.0 mm(15)
    • 40.651 mm(1)
    • 40.901 mm(2)
    • 41.0 mm(5)
    • 43.7 mm(2)
    • 44.45 mm(1)
    • 50.0 mm(4)
    • 50.801 mm(1)
    • 53.35 mm(2)
    • 63.0 mm(1)
    • 63.75 mm(1)
    • 65.0 mm(1)
    • 76.2 mm(1)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (18)
    • Screw-On Connection (9)
    • Straight-Cylindrical (33)
    • Weldon (24)
    Number of Flutes
    Number of Flutes
    • 1 (3)
    • 11 (1)
    • 2 (17)
    • 3 (25)
    • 4 (16)
    • 5 (7)
    • 6 (7)
    • 8 (4)
    • 9 (4)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (84)
    • 2.0 (84)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(12)
    • 1.681 in(1)
    • 1.75 in(1)
    • 1.889 in(1)
    • 1.891 in(1)
    • 1.969 in(2)
    • 2.0 in(1)
    • 2.116 in(1)
    • 2.126 in(1)
    • 2.465 in(2)
    • 2.48 in(1)
    • 2.539 in(2)
    • 2.638 in(1)
    • 2.75 in(1)
    • 2.757 in(3)
    • 3.0 in(1)
    • 3.11 in(1)
    • 3.189 in(3)
    • 3.2 in(2)
    • 3.228 in(1)
    • 3.25 in(1)
    • 3.465 in(3)
    • 3.5 in(2)
    • 3.781 in(2)
    • 3.938 in(6)
    • 4.0 in(4)
    • 4.331 in(3)
    • 4.5 in(2)
    • 4.724 in(2)
    • 4.8 in(3)
    • 5.118 in(3)
    • 5.2 in(1)
    • 6.694 in(5)
    • 6.7 in(2)
    • 8.0 in(2)
    • 8.268 in(2)
    • 9.8 in(1)
    • 9.843 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(12)
    • 42.7 mm(1)
    • 44.45 mm(1)
    • 47.95 mm(1)
    • 48.0 mm(1)
    • 50.0 mm(2)
    • 50.801 mm(1)
    • 53.75 mm(1)
    • 54.0 mm(1)
    • 62.6 mm(2)
    • 63.0 mm(1)
    • 64.5 mm(2)
    • 67.0 mm(1)
    • 69.851 mm(1)
    • 70.0 mm(3)
    • 76.2 mm(1)
    • 79.0 mm(1)
    • 81.0 mm(3)
    • 81.275 mm(2)
    • 82.0 mm(1)
    • 82.551 mm(1)
    • 88.0 mm(3)
    • 88.9 mm(2)
    • 96.0 mm(2)
    • 100.0 mm(6)
    • 101.601 mm(4)
    • 110.0 mm(3)
    • 114.301 mm(2)
    • 120.0 mm(2)
    • 121.926 mm(3)
    • 130.0 mm(3)
    • 132.076 mm(1)
    • 170.0 mm(5)
    • 170.175 mm(2)
    • 203.201 mm(2)
    • 210.0 mm(2)
    • 248.925 mm(1)
    • 250.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(84)
    • 0.016 in(84)
    • 0.031 in(84)
    • 0.047 in(84)
    • 0.063 in(84)
    • 0.079 in(84)
    • 0.095 in(84)
    • 0.122 in(84)
    • 0.126 in(84)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(84)
    • 0.4 mm(84)
    • 0.775 mm(84)
    • 0.8 mm(84)
    • 1.201 mm(84)
    • 1.6 mm(84)
    • 2.0 mm(84)
    • 2.401 mm(84)
    • 3.1 mm(84)
    • 3.2 mm(84)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WDN10U (84)
    • WK15CM (84)
    • WK15PM (84)
    • WN10HM (84)
    • WN25PM (84)
    • WP25PM (84)
    • WP35CM (84)
    • WP40PM (84)
    • WS30PM (84)
    • WS40PM (84)
    • WU20PM (84)
    • WU35PM (84)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.7 (1)
    • 0.9 (2)
    • 1.1 (1)
    • 1.2 (1)
    • 1.5 (4)
    • 1.8 (1)
    • 1.9 (5)
    • 2.6 (3)
    • 2.8 (2)
    • 3.2 (1)
    • 3.6 (13)
    • 3.7 (2)
    • 4.2 (1)
    • 5.1 (9)
    • 5.3 (8)
    • 6.6 (1)
    • 7.8 (8)
    • 8.6 (7)
    • 9.7 (1)
    • 10.0 (5)
    • 12.5 (2)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.371 in(2)
    • 0.392 in(1)
    • 0.467 in(1)
    • 0.539 in(2)
    • 0.543 in(5)
    • 0.577 in(1)
    • 0.636 in(1)
    • 0.669 in(1)
    • 0.67 in(5)
    • 0.709 in(7)
    • 0.722 in(1)
    • 0.74 in(1)
    • 0.785 in(1)
    • 0.896 in(7)
    • 0.911 in(6)
    • 1.084 in(1)
    • 1.151 in(4)
    • 1.159 in(8)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 9.425 mm(2)
    • 9.951 mm(1)
    • 11.851 mm(1)
    • 13.701 mm(2)
    • 13.8 mm(5)
    • 14.65 mm(1)
    • 16.151 mm(1)
    • 17.0 mm(1)
    • 17.026 mm(5)
    • 18.0 mm(7)
    • 18.35 mm(1)
    • 18.8 mm(1)
    • 19.951 mm(1)
    • 22.75 mm(7)
    • 23.151 mm(6)
    • 27.526 mm(1)
    • 29.201 mm(4)
    • 29.451 mm(8)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (57)
    • SCREW-ON (9)
    • SHELL MILL (18)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(2)
    • 13.0 mm(1)
    • 15.875 mm(3)
    • 16.0 mm(11)
    • 18.0 mm(2)
    • 19.0 mm(7)
    • 19.05 mm(7)
    • 20.0 mm(10)
    • 21.0 mm(2)
    • 22.0 mm(4)
    • 25.0 mm(10)
    • 25.401 mm(8)
    • 27.0 mm(1)
    • 29.0 mm(4)
    • 31.701 mm(4)
    • 32.0 mm(6)
    • 38.1 mm(1)
    • 40.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(2)
    • 0.512 in(1)
    • 0.625 in(3)
    • 0.63 in(11)
    • 0.709 in(2)
    • 0.748 in(7)
    • 0.75 in(7)
    • 0.787 in(10)
    • 0.828 in(2)
    • 0.866 in(4)
    • 0.984 in(10)
    • 1.0 in(8)
    • 1.063 in(1)
    • 1.143 in(4)
    • 1.248 in(4)
    • 1.26 in(6)
    • 1.5 in(1)
    • 1.575 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    VSM11™ • Stopkové frézy s válcovou stopkou • Metrické
    (20)

    VSM11™ • Stopkové frézy s válcovou stopkou • Metrické

    VSM11™ • Nástrčné frézy • Metrické
    (9)

    VSM11™ • Nástrčné frézy • Metrické

    VSM11™ • Frézy se závitovou stopkou • Metrické
    (5)

    VSM11™ • Frézy se závitovou stopkou • Metrické

    VSM11 • Stopkové frézy s válcovou stopkou • Palcové
    (13)

    VSM11 • Stopkové frézy s válcovou stopkou • Palcové

    VSM11 • Nástrčné frézy • Palcové
    (8)

    VSM11 • Nástrčné frézy • Palcové

    VSM11 • Stopkové frézy se stopkou Weldon • Palcové
    (8)

    VSM11 • Stopkové frézy se stopkou Weldon • Palcové

    VSM11™ • Stopka Weldon® • Metrické
    (16)

    VSM11™ • Stopka Weldon® • Metrické

    VSM11 • Helical Shell Mills • Inch
    (1)

    VSM11 • Helical Shell Mills • Inch

    VSM11 • Stopkové frézy se závitovou stopkou • Palcové
    (4)

    VSM11 • Stopkové frézy se závitovou stopkou • Palcové

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk