Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Řada VSM11

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (15)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
      • M Stainless Steel (15)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(15)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(15)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(15)
      • K Cast Iron (15)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
      • N Non-Ferrous Materials (15)
        • N1
          Wrought Aluminum (15)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(15)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(15)
      • S High-Temp Alloys (15)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(15)
      • H Hardened Materials (15)
        • H1
          Hardened Materials 44-48 HRC(15)
      Applications
      Applications
      • Face MillingFace Milling (15)
      • PocketPocket (1)
      • Pocket HelicalPocket Helical (1)
      • Pocket MillingPocket Milling (1)
      • Profile MillingProfile Milling (1)
      • RampingRamping (1)
      • Shoulder Bottom ShoulderShoulder Bottom Shoulder (1)
      • Shoulder MillingShoulder Milling (15)
      • Shoulder RoughingShoulder Roughing (15)
      • Shoulder Square EndShoulder Square End (8)
      • Slot MillingSlot Milling (11)
      • Slot Square EndSlot Square End (4)
      Cutting Diameter
      Cutting Diameter
      • 0.984 in(1)
      • 1.0 in(1)
      • 1.25 in(2)
      • 1.26 in(2)
      • 1.5 in(2)
      • 1.575 in(2)
      • 1.969 in(2)
      • 2.0 in(3)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 25.0 mm(1)
      • 25.401 mm(1)
      • 31.75 mm(2)
      • 32.0 mm(2)
      • 38.1 mm(2)
      • 40.0 mm(2)
      • 50.0 mm(2)
      • 50.801 mm(3)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Length
      Cutting Length
      • 42.026 mm(1)
      • 42.2 mm(1)
      • 42.276 mm(1)
      • 42.7 mm(2)
      • 43.1 mm(2)
      • 43.2 mm(1)
      • 43.225 mm(2)
      • 51.625 mm(5)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 1.655 in(1)
      • 1.661 in(1)
      • 1.665 in(1)
      • 1.681 in(2)
      • 1.697 in(2)
      • 1.701 in(1)
      • 1.702 in(2)
      • 2.032 in(5)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 2.205 in(3)
      • 2.25 in(3)
      • 2.362 in(2)
      • 2.5 in(2)
      • 2.75 in(2)
      • 2.757 in(2)
      • 3.0 in(1)
      Reach MinkomuReach Max
      Reach
      Reach
      • 56.0 mm(3)
      • 57.151 mm(3)
      • 60.0 mm(2)
      • 63.5 mm(2)
      • 69.851 mm(2)
      • 70.0 mm(2)
      • 76.2 mm(1)
      Reach MinkomuReach Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (9)
      • Weldon (6)
      Number of Flutes
      Number of Flutes
      • 2 (2)
      • 3 (2)
      • 4 (6)
      • 5 (2)
      • 6 (3)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (15)
      • 2.0 (15)
      Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
      Over All Length [L]
      Over All Length [L]
      • 2.362 in(2)
      • 2.5 in(2)
      • 2.75 in(2)
      • 2.757 in(2)
      • 3.0 in(1)
      • 4.449 in(1)
      • 4.53 in(3)
      • 4.606 in(2)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 60.0 mm(2)
      • 63.5 mm(2)
      • 69.851 mm(2)
      • 70.0 mm(2)
      • 76.2 mm(1)
      • 113.0 mm(1)
      • 115.051 mm(3)
      • 117.0 mm(2)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.008 in(15)
      • 0.016 in(15)
      • 0.031 in(15)
      • 0.047 in(15)
      • 0.063 in(15)
      • 0.079 in(15)
      • 0.095 in(15)
      • 0.122 in(15)
      • 0.126 in(15)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.2 mm(15)
      • 0.4 mm(15)
      • 0.775 mm(15)
      • 0.8 mm(15)
      • 1.201 mm(15)
      • 1.6 mm(15)
      • 2.0 mm(15)
      • 2.401 mm(15)
      • 3.1 mm(15)
      • 3.2 mm(15)
      Corner Radius MinkomuCorner Radius Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • WDN10U (15)
      • WK15CM (15)
      • WK15PM (15)
      • WN10HM (15)
      • WN25PM (15)
      • WP25PM (15)
      • WP35CM (15)
      • WP40PM (15)
      • WS30PM (15)
      • WS40PM (15)
      • WU20PM (15)
      • WU35PM (15)
      Maximum Ramp Angle
      Maximum Ramp Angle
      • 1.8 (5)
      • 2.4 (2)
      • 2.5 (2)
      • 3.2 (4)
      • 4.4 (1)
      • 4.5 (1)
      Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
      backEnd
      Connection Type
      Connection Type
      • CYLINDRICAL (6)
      • SHELL MILL (9)
      Back-End Diameter
      Back-End Diameter
      • 16.0 mm(2)
      • 19.05 mm(4)
      • 22.0 mm(2)
      • 25.0 mm(1)
      • 25.401 mm(2)
      • 31.75 mm(2)
      • 32.0 mm(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.63 in(2)
      • 0.75 in(4)
      • 0.866 in(2)
      • 0.984 in(1)
      • 1.0 in(2)
      • 1.25 in(2)
      • 1.26 in(2)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      VSM11™ • Víceřadé stopkové frézy se stopkou Weldon® • Metrické
      (3)

      VSM11™ • Víceřadé stopkové frézy se stopkou Weldon® • Metrické

      VSM11™ • Víceřadé nástrčné frézy • Metrické
      (4)

      VSM11™ • Víceřadé nástrčné frézy • Metrické

      VSM11 • Helical Shell Mills • Inch
      (1)

      VSM11 • Helical Shell Mills • Inch

      VSM11H™ • Helical End Mills with Weldon® Shank • Inch
      (3)

      VSM11H™ • Helical End Mills with Weldon® Shank • Inch

      VSM11H • Helical Shell Mills • Inch
      (4)

      VSM11H • Helical Shell Mills • Inch

      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?