Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    Cast Iron Milling Beast

    M8090 is a fine pitch face milling series for rough, semi-finish and finish milling of a variety of cast and nodular irons at high-feed rates. 

    The M8090 face mill is designed with an 89-degree approach angle for rough and semi-finish milling applications in cast iron and nodular iron with the added flexibility of using carbide or ceramic inserts on the same cutter based on productivity needs.

    The M8090-F finish mill is designed to achieve a surface finish <1.6 microns Ra in cast iron finish milling applications at high feeds.

    Inserts are offered in carbide grades: WK15PM, ceramic grade WK25YM and PcBN grade WBK40U.

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • K Cast Iron (34)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(34)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(34)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(34)
      • N Non-Ferrous Materials (10)
        • N1
          Wrought Aluminum (10)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(10)
      Select All Star
      • CN (12)
      • DE (24)
      • IN (25)
      Applications
      Applications
      • Face MillingFace Milling (29)
      Cutting Diameter
      Cutting Diameter
      • 2.48 in(2)
      • 3.15 in(3)
      • 3.938 in(3)
      • 4.0 in(3)
      • 4.921 in(3)
      • 6.0 in(3)
      • 6.299 in(3)
      • 7.875 in(3)
      • 8.0 in(3)
      • 9.843 in(3)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 63.0 mm(2)
      • 80.0 mm(3)
      • 100.0 mm(3)
      • 101.601 mm(3)
      • 125.0 mm(3)
      • 152.4 mm(3)
      • 160.0 mm(3)
      • 200.0 mm(3)
      • 203.201 mm(3)
      • 250.0 mm(3)
      Cutting Diameter MinkomuCutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 63.375 mm(2)
      • 80.375 mm(3)
      • 100.375 mm(3)
      • 101.976 mm(3)
      • 125.375 mm(3)
      • 152.775 mm(3)
      • 160.375 mm(3)
      • 200.375 mm(3)
      • 203.576 mm(3)
      • 250.375 mm(3)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 2.495 in(2)
      • 3.164 in(3)
      • 3.952 in(3)
      • 4.015 in(3)
      • 4.936 in(3)
      • 6.016 in(3)
      • 6.314 in(3)
      • 7.889 in(3)
      • 8.015 in(3)
      • 9.857 in(3)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 11.5 mm(29)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.453 in(29)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 1.575 in(2)
      • 1.969 in(6)
      • 2.0 in(3)
      • 2.38 in(4)
      • 2.48 in(14)
      Reach MinkomuReach Max
      Reach
      Reach
      • 40.0 mm(2)
      • 50.0 mm(6)
      • 50.801 mm(3)
      • 60.45 mm(4)
      • 63.0 mm(14)
      Reach MinkomuReach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 89.0 (29)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (5)
      • B-Cutter Retention Screw (13)
      • C-Bolt Circle (11)
      Number of Flutes
      Number of Flutes
      • 10 (4)
      • 12 (4)
      • 15 (2)
      • 16 (1)
      • 18 (6)
      • 24 (5)
      • 28 (2)
      • 5 (1)
      • 7 (2)
      • 8 (1)
      • 9 (1)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 4.0 (32)
      • 8.0 (31)
      Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.575 in(2)
      • 1.969 in(6)
      • 2.0 in(3)
      • 2.38 in(4)
      • 2.48 in(14)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 40.0 mm(2)
      • 50.0 mm(6)
      • 50.801 mm(3)
      • 60.45 mm(4)
      • 63.0 mm(14)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.031 in(11)
      • 0.047 in(32)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.8 mm(11)
      • 1.201 mm(32)
      Corner Radius MinkomuCorner Radius Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM-F (10)
      • TN7110 (29)
      • WBK40U (10)
      • WK15CM (30)
      • WK15PM (30)
      • WK25YM (30)
      Hand Of Tool
      Hand Of Tool
      • R (29)
      Wiper Insert
      Wiper Insert
      • N (3)
      • Y (2)
      frontEnd
      Insert Shape
      Insert Shape
      • S-SQUARE 90 (33)
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • S-SQUARE 90 (4)
      Insert IC Size
      Insert IC Size
      • 12.701 mm(5)
      Insert IC Size MinkomuInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.5 in(5)
      Insert IC Size MinkomuInsert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 12.701 mm(5)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.5 in(5)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • MM (2)
      Cutting Tool Material
      Cutting Tool Material
      • B H (1)
      • C N (1)
      • H W (3)
      Tolerance Class
      Tolerance Class
      • E (3)
      • H (2)
      backEnd
      Connection Type
      Connection Type
      • SHELL MILL (29)
      Back-End Diameter
      Back-End Diameter
      • 22.0 mm(2)
      • 27.0 mm(3)
      • 31.75 mm(3)
      • 32.0 mm(3)
      • 40.0 mm(6)
      • 50.801 mm(3)
      • 60.0 mm(6)
      • 63.5 mm(3)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.866 in(2)
      • 1.063 in(3)
      • 1.25 in(3)
      • 1.26 in(3)
      • 1.575 in(6)
      • 2.0 in(3)
      • 2.362 in(6)
      • 2.5 in(3)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      M8090 89°
      (23)

      M8090 89°

      M8090-F 89°
      (14)

      M8090-F 89°

      Where To Buy

      Find an authorized WIDIA distributor near you.

      Search Near Me
      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?