Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

    One Geometry, Three Grades

    One universal geometry in the latest Victory™ grades WP35CM, WK15CM, and WU20PM. With less complexity, more materials can be machined. The proven Victory™ grades cover most target applications.

    Grade WK15CM - Ideal for Cast Iron
    A wear-resistant grade with balanced toughness for general milling in dry machining, but can also be used wet.

    Grade WP35CM - Ideal for Steel and Cast Iron
    This grade has a wide range of applications in general and rough milling. Performs best in dry, but can also be used under wet conditions.

    Grade WU20PM - Ideal for Steel, Stainless Steel, and High-Temperature Alloys, also siuitable for grey and nodular irons.
    A universal grade that resists breakage and offers improved wear resistance and increased strength. Can be used for both dry and wet machining.

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (17)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(16)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(17)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(17)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(17)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(17)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(17)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(17)
      • M Stainless Steel (17)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(17)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(17)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(17)
      • K Cast Iron (18)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(18)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(18)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(18)
      • N Non-Ferrous Materials (15)
        • N1
          Wrought Aluminum (15)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(15)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(15)
      • S High-Temp Alloys (17)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(17)
      • H Hardened Materials (15)
        • H1
          Hardened Materials 44-48 HRC(15)
      Select All Star
      • CN (5)
      • DE (10)
      • IN (12)
      Applications
      Applications
      • Chamfer MillingChamfer Milling (14)
      • Face MillingFace Milling (14)
      Cutting Diameter
      Cutting Diameter
      • 1.969 in(1)
      • 2.48 in(1)
      • 3.0 in(1)
      • 3.15 in(1)
      • 3.938 in(1)
      • 4.0 in(1)
      • 4.921 in(1)
      • 5.0 in(1)
      • 6.0 in(1)
      • 6.299 in(1)
      • 7.875 in(1)
      • 8.0 in(1)
      • 9.843 in(1)
      • 12.403 in(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 50.0 mm(1)
      • 63.0 mm(1)
      • 76.2 mm(1)
      • 80.0 mm(1)
      • 100.0 mm(1)
      • 101.601 mm(1)
      • 125.0 mm(1)
      • 127.0 mm(1)
      • 152.4 mm(1)
      • 160.0 mm(1)
      • 200.0 mm(1)
      • 203.201 mm(1)
      • 250.0 mm(1)
      • 315.0 mm(1)
      Cutting Diameter MinkomuCutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 58.875 mm(1)
      • 71.875 mm(1)
      • 85.025 mm(1)
      • 88.825 mm(1)
      • 108.825 mm(1)
      • 110.426 mm(1)
      • 133.85 mm(1)
      • 135.85 mm(1)
      • 161.25 mm(1)
      • 168.851 mm(1)
      • 208.851 mm(1)
      • 212.05 mm(1)
      • 258.85 mm(1)
      • 323.85 mm(1)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 2.318 in(1)
      • 2.83 in(1)
      • 3.347 in(1)
      • 3.497 in(1)
      • 4.284 in(1)
      • 4.347 in(1)
      • 5.271 in(1)
      • 5.348 in(1)
      • 6.348 in(1)
      • 6.649 in(1)
      • 8.222 in(1)
      • 8.348 in(1)
      • 10.191 in(1)
      • 12.75 in(1)
      Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 9.0 mm(14)
      Cutting Length MinkomuCutting Length Max
      Cutting Length
      Cutting Length
      • 0.354 in(14)
      Cutting Length MinkomuCutting Length Max
      Reach
      Reach
      • 1.575 in(2)
      • 1.75 in(1)
      • 1.969 in(2)
      • 2.0 in(1)
      • 2.38 in(3)
      • 2.48 in(4)
      • 3.15 in(1)
      Reach MinkomuReach Max
      Reach
      Reach
      • 40.0 mm(2)
      • 44.45 mm(1)
      • 50.0 mm(2)
      • 50.801 mm(1)
      • 60.45 mm(3)
      • 63.0 mm(4)
      • 80.0 mm(1)
      Reach MinkomuReach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 64.0 (14)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (4)
      • B-Cutter Retention Screw (5)
      • C-Bolt Circle (5)
      Number of Flutes
      Number of Flutes
      • 11 (2)
      • 14 (2)
      • 16 (1)
      • 20 (1)
      • 4 (1)
      • 5 (1)
      • 6 (2)
      • 7 (2)
      • 9 (2)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.575 in(2)
      • 1.75 in(1)
      • 1.969 in(2)
      • 2.0 in(1)
      • 2.38 in(3)
      • 2.48 in(4)
      • 3.15 in(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 40.0 mm(2)
      • 44.45 mm(1)
      • 50.0 mm(2)
      • 50.801 mm(1)
      • 60.45 mm(3)
      • 63.0 mm(4)
      • 80.0 mm(1)
      Over All Length [L] MinkomuOver All Length [L] Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • WK15CM (15)
      • WP35CM (16)
      • WU20PM (15)
      Hand Of Tool
      Hand Of Tool
      • R (14)
      Wiper Insert
      Wiper Insert
      • N (1)
      • Y (3)
      frontEnd
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • S-SQUARE 90 (4)
      Insert IC Size
      Insert IC Size
      • 15.875 mm(4)
      Insert IC Size MinkomuInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.625 in(4)
      Insert IC Size MinkomuInsert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 15.875 mm(4)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.625 in(4)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • MM (3)
      Cutting Tool Material
      Cutting Tool Material
      • H W (3)
      Tolerance Class
      Tolerance Class
      • M (4)
      backEnd
      Connection Type
      Connection Type
      • SHELL MILL (14)
      Back-End Diameter
      Back-End Diameter
      • 22.0 mm(2)
      • 25.401 mm(1)
      • 27.0 mm(1)
      • 31.75 mm(1)
      • 32.0 mm(1)
      • 38.1 mm(1)
      • 40.0 mm(2)
      • 50.801 mm(1)
      • 60.0 mm(3)
      • 63.5 mm(1)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.866 in(2)
      • 1.0 in(1)
      • 1.063 in(1)
      • 1.25 in(1)
      • 1.26 in(1)
      • 1.5 in(1)
      • 1.575 in(2)
      • 2.0 in(1)
      • 2.362 in(3)
      • 2.5 in(1)
      Back-End Diameter MinkomuBack-End Diameter Max
      No filters matching ""
      Těla nástrojů
      (14)

      Těla nástrojů

      Břitové destičky
      (4)

      Břitové destičky

      Máte otázky?

      Náši odborníci vám pomohou.

      Kontaktujte nás
      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?