Insertos de estilo T

Selecionar filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (265)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(265)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(265)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(265)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(265)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(265)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(265)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(265)
    • M Stainless Steel (100)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(100)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(100)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(100)
    • K Cast Iron (158)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(158)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(158)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(158)
    • N Non-Ferrous Materials (25)
      • N1
        Wrought Aluminum (25)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(4)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (4)
      • N6
        Carbon, Graphite Composites, CFRP (4)
      • N7
        MMC's (4)
    • S High-Temp Alloys (114)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(114)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(114)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(114)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(58)
    • H Hardened Materials (1)
      • H1
        Hardened Materials 44-48 HRC(1)
      • H2
        Hardened Materials 48-55 HRC(1)
      • H3
        Hardened Materials 56-60 HRC(1)
      • H4
        Hardened Materials >60 HRC(1)
    Select All Star
    • CN (12)
    • DE (79)
    • GB (7)
    • IN (61)
    • SG (41)
    • US (39)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (99)
    • Lightly Interrupted Cut (170)
    • Smooth Cut (216)
    • Varying Depth of Cut (188)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (1)
    • 3.0 (126)
    • 6.0 (190)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(2)
    • 0.016 in(81)
    • 0.031 in(146)
    • 0.047 in(67)
    • 0.063 in(17)
    • 0.095 in(3)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(2)
    • 0.4 mm(81)
    • 0.8 mm(146)
    • 1.201 mm(67)
    • 1.6 mm(17)
    • 2.401 mm(3)
    Corner Radius MinaCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CW2015 (1)
    • THM (18)
    • THM X (1)
    • THM-F (1)
    • THM-X (5)
    • THMF-X (2)
    • TN2000 (7)
    • TN4000 (5)
    • TTM08 (3)
    • TTM09 (1)
    • TTMS (1)
    • TTR (4)
    • TTR-X (2)
    • TTS (3)
    • W00342 (2)
    • WK05CT (5)
    • WK15CT (10)
    • WK20CT (39)
    • WM15CT (10)
    • WM25CT (34)
    • WM35CT (7)
    • WP15CT (41)
    • WP20TT (1)
    • WP25CT (44)
    • WP35CT (26)
    • WS10PT (15)
    • WS25PT (13)
    • WU10HT (6)
    • WU10PT (5)
    • WU25PT (5)
    Wiper Insert
    Wiper Insert
    • N (316)
    insertGeometry
    Insert IC Size
    Insert IC Size
    • 6.351 mm(34)
    • 9.525 mm(180)
    • 12.701 mm(85)
    • 15.875 mm(15)
    • 19.05 mm(2)
    Insert IC Size MinaInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(34)
    • 0.375 in(180)
    • 0.5 in(85)
    • 0.625 in(15)
    • 0.75 in(2)
    Insert IC Size MinaInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 11.0 mm(34)
    • 13.9 mm(5)
    • 16.5 mm(175)
    • 22.0 mm(85)
    • 27.5 mm(15)
    • 33.0 mm(2)
    Cutting Edge Length MinaCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.433 in(34)
    • 0.547 in(5)
    • 0.65 in(175)
    • 0.866 in(85)
    • 1.083 in(15)
    • 1.299 in(2)
    Cutting Edge Length MinaCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 65 (6)
    • 8 (2)
    • B (2)
    • FF (6)
    • FP (20)
    • FS (4)
    • ML (11)
    • MP (14)
    • MR (18)
    • MS (17)
    • MU (14)
    • RH (24)
    • RU (14)
    • UF (9)
    • UM (14)
    • UR (34)
    Cutting Tool Material
    Cutting Tool Material
    • C A (1)
    • H T (1)
    • H W (315)
    Tolerance Class
    Tolerance Class
    • G (8)
    • M (264)
    • U (44)
    No filters matching ""
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)